KISEMICONDUCTOR MUR3050CT

MUR3005CT THRU MUR3060CT
KI
UL TRA FSA T REC Tl FIER
SEMICONDUCTOR
VOL TAGE RANGE 50 - 600 Volts
CURRENT 30 Amperes
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Dual rectifier construction , positive centertap
• Glass passivated chip junctions
• Low power loss
• Low forward voltage , high current capability
• High surge current capability
• Ultra fast recovery times for high efficiency
• High temperature soldering guaranteed
260 0 C/10 seconds at terminals
TO-247
0.645 (1 6.4)
0625 (15.9)
0.201(5. 1)
O.189 (4.8}
MECHANICAl DATA
Case: JEDEC TO-247 molded plastic
Terminals : Lead solderable per MIL-STD-750 ,
Method 2026
Polarity: As marked
Weight: 5 .6 grams ( Approximately )
0.795 120.2)
0.775 9 6)
‘
,
~~뿔품
0.225 (5.7)
0.205 (5. 2)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Dimensions in inches and (m씨 imeters)
Ratings at 25' C ambient temperature unless otherwise specified
Single phase , half wave , 60 Hz , resistive or inductive load
For capacitive load , derate current by 20%
MAXIMUM RATINGES (At TA ; 25' C unless 이 herwise noted )
~UR3030CT MUR3040C
MUR3050C MUR3060C
SYMBOL
MUR3005C
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
150
200
300
400
500
600
Volts
Maximum RMS Voltage
VR MS
35
70
105
140
210
280
350
420
Volts
Maximum DC Blocking Voltage
VDC
50
100
150
200
300
400
500
600
RATINGS
Maximum Average Forward Rectified Current
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
MUR301SC MUR3020C
Typical thermal resistance ( NOTE 2 )
Operating and Storage Temperature Range
Volts
l。
30.0
Amps
IFSM
300
Amps
CJ
Typical Junction capacitance per leg ( NOTE 1 )
UNITS
200
pF
140
R 8JC
1.0
' C /W
TJ, TSTG
-65 to +175
。c
ELECTRICAL CHARACTERISTICS ( At TA ; 25' C unless otherwise noted )
CHARACTERISTICS
Maximum Instantaneous
Fo 미vard
SYMBOL
Voltage at 15.0 A DC
Maximum DC reverse current
at rated DC blocking vo ltage per leg
I Tc ;
0.975
1.30
1.50
10.0
IR
100' C
UNITS
Vo lts
uAmps
500
Maximum reverse recovery time ( NOTE 3 ) per leg
NOTES : 1.
2.
3.
4.
~UR3005C떼 R301κ삐 R301껴MUR3020폐 얘찌3<l폐 UR30~썩 MUR30떼 M얘3060C
VF
trr
Measured at 1.0 MHz and applied reverse vo ltage of 4.0 Volts
Thermal resistan ce from junction to case per leg mounted on heatsink
Reverse recovery test conditions : IF ; 0.5 A , Ir; -1 .0 A , Irr ; -0.25 A
Suffix " C " ; Common Cathod , Suffix " A " ; Common Anode , Suffix " D " ; Double
2-1
35
50
nS
200 1-6