1608 Infrared Emitting Diode KCL1608 Description The KCL1608 is an Infrared Emitting Diode in miniature SMD package which is molded in a water clear plastic with flat top view lens. Features z z z Low forward voltage Package in 8mm tape on 7 inch diameter reel Small Double - End package Applications z z z PCB mounted infrared sensor Floppy Disk Drive Optical switches Absolute Maximum Ratings Parameter Continuous Forward Current Reverse Voltage Pulse Forward Current*1 Power Dissipation Operating Temperature Storage Temperature Soldering Temperature*2 (TA=25℃) Symbol Rating Unit IF VR IFP PD Topr. Tstg. Tsol 50 5 100 100 -25~+85 -40~+85 260 mA V mA mW *1. Pulse width tw=100µsec, cycle T=10msec *2. Distance from end of the package =2mm, Soldering time=3 seconds. Max. Electrical Characteristics (Ta=25℃) Description Symbol Condition Min. Typ. Max. Forward Voltage VF IF=20㎃ - 1.3 2.0 V Reverse Current IR VR=5V - - 10 uA Radiant intensity Po IF=20㎃ - 3.9 - mW Peak Wavelength λp IF=20㎃ Spectral Width at FWHM ∆λ IF=20㎃ - 50 - nm Half Angle (View Angle) ∆Θ - - ±60 - deg. Characteristic Symbol Test Condition Min. Typ. Max. Unit 870 Unit nm The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev. date: 28-JAN-11 KSD-XXXXXX-000 KCL1608 Ordering Information Part Number Marking Code Package Packaging KCL1608 - COB Reel Package Outline Dimensions Notes : 1. All dimension are in millimeters 2. General Tolerance is ±0.1mnm. The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev. date: 21-JAN-11 KSD-XXXXXX-000