SAW Clock Oscillators Surface Mount Type KC7050Y-L2 Series LVDS/ 2.5V/ 7.0×5.0mm Features • Low Voltage 2.5V • Excellent Jitter performance • LVDS output • Operation at Fundamental high frequency •± 50×10-6 available Table 1 Freq. Tol. Code × 10-6 ±100 1 RoHS Compliant 0 ± 50 A ±100 Operating Temperature Range (°C) 0 to +70 Note Standard specifications With only certain -5 to +85 frequencies How to Order KC7050Y 312.500 L 2 1 E 00 ① ② ③④⑤⑥ ⑦ ① Type (7.0×5.0mm SMD) ② Output Frequency ③ Output Type (LVDS) ④ Supply Voltage (2.5V) ⑤ Frequency Tolerance (See Table 1) ⑥ Symmetry/ INH Function (45/ 55%, Stand-by) ⑦ Customer Special Model Suffix (STD Specification is “00”) Packaging (Tape & Reel 1000 pcs./ reel) Specifications Item Output Frequency RangeNote1 Symbol fo Frequency ToleranceNote2 f_tol Storage Temperature Range Operating Temperature Range Max. Supply Voltage Supply Voltage Current Consumption (Standard Loaded) Symmetry Rise/ Fall Time (20% to 80% Output Level Standard Loaded) Low Level Output VoltageNote3 High Level Output VoltageNote3 Diffrentical Output VoltageNote3 Diffrentical Output Voltage ErrorNote3 Offset Voltage Offset Voltage Error Output Load Input Voltage Range Low Level Input Voltage High Level Input Voltage Disable Time Enable Time Start-up Time Deterministic Jitter (DJ) 1 Sigma Jitter Peak to Peak Jitter T_stg T_use — VCC Conditions Initial tolerance, Operating temperature Op. Temp.: 0 to +70°C range, Rated power supply voltage change, Op. Temp.: 0 to +70°C Aging (1 year @25°C), Shock and vibration Op. Temp.: -5 to +85°C Standard Specifications 2.5V Min. 75 -50 -100 -100 -55 0 -0.3 +2.38 Max. 700 +50 +100 +100 +125 +70 +5 +2.63 Units MHz ×10-6 °C °C V V — 70 mA SYM 100ohm @crossing point 45 55 % tr/ tf 100ohm — 400 ps 0.9 — 247 — 1.125 — — 1.6 454 50 1.375 50 V V mV mV V mV ohm V V V ns ms ms ps ps ps ICC VOL VOH VOD dVOD VOS dVOS RL VIN VIL VIH t_dis t_ena t_str DJ JSigma JPK-PK Typ. 1.1V Typ. 1.43V Typ. 330mV dVOD=|VOD1-VOD2| Typ. 1.25V dVOS=|VOS1-VOS2| LVDS Output 100 0 VCC — 30% VCC 70% VCC — — 200 — 10 — 10 0.2 typ. 2 typ. 20 typ. @Minimum operating voltage to be 0 sec. Measured with Wavecrest DTS-2079 VISI 6.3.1 Note : All electrical characteristics are defined at the maximum load and operating temperature range. Note1: Please contact us for inquiry about operating temperature range, available frequencies and other conditions. Note2: Aging (10 years @25°C) specification is available. Note3: DC characteristic Dimensions (Unit: mm) 7.0 Recommended Land Pattern #3 #2 #1 1.1 2.54 2.54 Plating: Ni+Au Tolerance: ±0.2 #1 #2 #3 #4 #5 #6 INH Function Pad1 Pad4/ Pad5 (Output) OPEN Active "H" Level Active "L" Level High Z (No-Oscillation) 2.54 3.9 #6 Pad Connections INH NC Case GND Output Complementary Output VCC 1.5 #5 2.8 #4 2.54 1.1 5.0 1.4 (Unit: mm) 1.6 Note: A capacitor of value 0.01μF and 10μF between VCC and GND is recommended.