FTR-K1 SERIES POWER RELAY 1 POLE - 1/3/5/10A Medium Load Control LZ Series n FEATURES UL, CSA, SEV recognized l Contact rating types - Low level to 10 amps switching l Standard and high sensitivity types available l High surge strength version available l UL class B (130°C) insulation type available (only plastic sealed type) l Printed circuit terminals - 0.1" grid pitch l Plastic sealed type, RTIII l RoHS compliant. Please see page 9 for more information l n PARTNUMBER INFORMATION [Example] (a) LZ (a) - B 12 H M S E (b) (c) (d) (e) (f ) (g) Relay type (b) Coil wire class K HV - UC (h) (i) (j) LZ : LZ Series Nil B : Standard type : UL class B insulation type (130 °C) (c) Coil rated voltage 12 (d) Contact type Nil H V W : 1.5....100VDC Coil rating table at page 3 (e) Contact configuration Nil M : 1 form C (SPDT) : 1 form A (SPST-NO) (f) Coil type Nil S : Standard type (450-600mW) : High sensitive type (300mW) (g) Contact material Nil Nil Nil E : Gold overlay silver-palladium (1A) (only LZ-W) : Gold overlay silver-nickel (3A, 5A) : Silver alloy (10A) (only LZ-V) (contains cadmium) : Silver-nickel (3A, 5A) (h) Enclosure Nil K C : Flux proof type, RTII : Plastic sealed type (recommended for new designs) RTIII : Plastic sealed type (with tape) RTIII (i) Surge strength Nil HV : Standard type (4,000V) : High surge strength type (6,000V) UC : UL, CSA approved type (j) Approvals : 3A : 5A : 10A (standard coil power only) : 1A (bifurcated contact) 1 FTR-K1 SERIES LZ SERIES n SPECIFICATION LZ-( ) (Standard type) Item Contact Data Life Coil Data Timing Data Insulation 5A Type 3A Type 1A Type LZ - ( ) V LZ - ( ) VM LZ - ( ) H LZ - ( ) HE LZ - ( ) LZ - ( ) E LZ- ( ) W Configuration 1 form A (SPST-NO), 1 form C (SPDT) Construction Single Single (crossbar) Bifurcated (crossbar) Material Silver alloy (contains cadmium) Gold overlay silver alloy Silver alloy (LZ-HE, E) Gold overlay silverpalladium Resistance (initial) (at 6 VDC, 1A) Max. 100 mOhm Max. 70 mOhm (LZ-H, LZ) Max. 100 mOhm (LZ-HE, E) Max. 50 mOhm Contact rating (resistive) 10A, 120VAC/ 24VDC 1/4HP, 120VAC 5A, 120VAC/ 24VDC 1/8 HP, 120VAC Max. carrying current 10A 5A Max. switching voltage 250VAC, 150 VDC Max. switching power 1,680VA, 240W 960VA, 120W 600VA, 90W 190VA, 30W Max. switching current 10A 5A 3A Min. switching load * 100mA 5VDC 10mA, 10mA, 5VDC 5VDC(LZ-) (LZ-H) 100mA, 100mA, 5VDC 5VDC (LZ(LZ-HE) E) Mechanical Min. 20 x 106 operations Electrical Min. 100 x 103 operations (contact rating) Rated Power (at 20 °C) 450 - 600mW Operate Power (at 20 °C) 170 - 220 mW (LZ- ( ) V : 290 - 390 mW) Operating temperature range -30 °C to +70 °C (no frost) Operate (at nominal voltage) Max. 7 ms (without bounce) Release (at nominal voltage) Max. 4 ms (no diode) Resistance (initial) Min. 250MOhm at 500VDC Dielectric strength Surge strength Other 10A Type Vibration resistance Shock Weight 3A,120VAC/ 24VDC 1A, 120VAC / 1/10HP, 30VDC 120VAC 1A 1A 0.1mA, 100mVDC Open contacts 750VAC, 1min Contacts to coil 2,000VAC, 1min Coil to contacts 4,000V / High surge: 6,000V, 1.2 x 50µs standard wave Misoperation 10 to 55Hz double amplitude 3.3 mm Endurance 10 to 55Hz double amplitude 3.3 mm Misoperation Min. 100m/s² (11 ± 1ms) Endurance Min. 1,000m/s² (6 ± 1ms) Approximately 7.7g * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental contions and expected reliability levels. 2 FTR-K1 SERIES LZ SERIES n SPECIFICATION LZ-( ) S (High sensitive type) Item Contact Data Coil Data Timing Data Insulation 1A Type LZ-( )S, LZ-( )SE LZ-( )WS 1 form A (SPST-NO), 1 form C (SPDT) Construction Single (crossbar) Material Gold overlay silver nickel Resistance (initial) (at 6VDC, 1A) Max. 70mOhm (LZ-HS, S) Max. 100mOhm (LZ-HSE, SE) Bifurcated (crossbar) Silver nickel (LZHSE, SE) Gold overlay silverpalladium Max. 50mOhm Resistive 5A, 120VAC / 24VDC 3A, 120VAC / 30VDC 1A, 120VAC / 30VDC Motor load 1/8 HP, 120VAC 1/10 HP, 120VAC - Max. carrying current 5A Max. switching voltage 250VAC, 150 VDC Max. switching power 960VA, 120W 600VA, 90W 190VA, 30W Max. switching current 5A 3A 1A Min. switching load * 10 mA, 5VDC (LZ-HS, S) 100 mA, 5VDC (LZ-HSE, SE) Mechanical Min. 20 x 106 operations Electrical Min. 100 x 103 operations Rated power (at 20 °C) 330 mW Operate power (at 20 °C) 140 mW Operating temperature range -30 °C to +80 °C (no frost) Operate (at nominal voltage) Max. 7 ms Release (at nominal voltage) Max. 4 ms Resistance (initial) Min. 250MOhm at 500VDC Dielectric strength Surge strength Other 3A Type LZ-( )HS, LZ -( )HSE Configuration Contact rating Life 5A Type Vibration resistance Shock Weight 1A 0.1 mA, 100mVDC Open contacts 750VAC, 1min Contacts to coil 2,000VAC, 1min Coil to contacts 4,000V / -HV type: 6,000V, 1.2 x 50µs standard wave Misoperation 10 to 55Hz double amplitude 3.3 mm Endurance 10 to 55Hz double amplitude 3.3 mm Misoperation Min. 100m/s² (11 ± 1ms) Endurance Min. 1,000m/s² (6 ± 1ms) Approximately 7.7 g * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental contions and expected reliability levels. 3 LZ SERIES FTR-K1 SERIES n COIL RATING Standard type (450 mW) Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) * LZ-(B) ( ) VM LZ-(B) ( ) (M) (E) LZ-(B) ( ) W (M) LZ-(B) ( ) V Must ReleaseVoltage (VDC) * Rated Power (mW) 1.5 1.5 5 0.97 1.2 0.08 3 3 20 1.95 2.4 0.15 5 5 56 3.25 4 0.25 6 6 80 3.9 4.8 0.3 9 9 180 5.85 7.2 0.45 12 12 320 7.8 9.6 0.6 18 18 720 11.7 14.4 0.9 24 24 1,280 15.6 19.2 1.2 48 48 3,800 28.8 38.4 2.4 600 100 100 22,200 65 80 5 450 450 High sensitive type (330 mW) Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) *¹ Must ReleaseVoltage (VDC) *¹ 1.5 1.5 6.8 0.97 0.08 3 3 27 1.95 0.15 5 5 80 3.25 0.25 6 6 110 3.9 0.3 9 9 250 5.85 0.45 12 12 440 7.8 0.6 18 18 990 11.7 0.9 24 24 1,780 15.6 1.2 Rated Power (mW) 330 Note: All values in the table are valid for 20°C and zero contact current. * Specified operate values are valid for pulse wave voltage. 4 FTR-K1 SERIES LZ SERIES n SAFETY STANDARDS Type Compliance Contact rating UL UL 508 Flammability: UL 94-V0 (plastics) E 56149, E 45026 CSA C22.2 No. 14 LR 35579 [LZ-( )W, LZ-( )WS] 0.8A, 240VDC (resistive) 1A, 120VAC / 30VDC (resistive) [LZ-( ), LZ-( )S] 2.5A, 240 VDC (resistive) 3A, 120 VAC / 30VDC (resistive) 1/10 HP, 120VAC/2400VAC Pilot duty: D150 [LZ-( ), LZ-( )S] 2.5A, 240 VAC (resistive) 3A, 120 VAC / 30VDC (resistive) 1/10 HP, 120VAC/2400VAC Pilot duty: D150 [LZ-( )V] 7A, 240 VDC (resistive) 10A, 120 VAC / 30VDC (resistive) 1/4 HP, 120VAC/2400VAC Also complies with SEV. 5 FTR-K1 SERIES JV LZ SERIES n CHARACTERISTIC DATA 6 FTR-K1 SERIES LZ SERIES SERIES JV n REFERENCE DATA 7 FTR-K1 SERIES LZ SERIES n DIMENSIONS l Dimensions l Schematics (BOTTOM VIEW) LZ-M type (Flux proof type) l PC board mounting hole layout (BOTTOM VIEW) LZ-M-K, LZ-M-C type (Plastic sealed type or sealed with tape) LZ type (Flux proof type) LZ-K, LZ-C type (Plastic sealed type or sealed with tape) 8 FTR-K1 SERIES JV LZSERIES SERIES RoHS Compliance and Lead Free Information 1. General Information All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC including amendments. l Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005. (Amendment to Directive 2002/95/EC) l All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf l Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process. l 2. Recommended Lead Free Solder Profile l Recommended solder Sn-3.0Ag-0.5Cu. Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. Tin Whiskers l Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 9 FTR-K1 SERIES JV LZSERIES SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://us.fujitsu.com/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2010 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users’ own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. August 6, 2010 10