LUCKY LIGHT 3.68*6.3mm Rectangular Legend Yellow LED Technical Data Sheet P/N: LL-463YDS Spec No: VET1003 Rev No:V.1 Approved: JoJo Checked: Bob Lucky Light Electronics Co., Ltd Date: Dec/05/1990 Page: 1 OF 6 Drawn: Jiang Http://www.luckylight.cn LUCKY LIGHT Features ♦ Wide viewing angle ♦ General purpose leads ♦ Reliable and rugged ♦ Pb Free. Description ♦ The series is specally designed for applications requiring higher brightness. ♦ The led lamp are available with different color, intensities Applications ♦ Tv set ♦ Monitor ♦ Telephone ♦ Computer Spec No: VET1003 Rev No:V.1 Approved: JoJo Checked: Bob Lucky Light Electronics Co., Ltd Date: Dec/05/1990 Page: 2 OF 6 Drawn: Jiang Http://www.luckylight.cn LUCKY LIGHT Package Dimension: Part NO. Material Lens Color Source Color LL-463YDS GaAsP GaP Yellow Diffused Yellow Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(.010”)mm unless otherwise noted. 3. Specifications are subject to change without notice Spec No: VET1003 Rev No:V.1 Approved: JoJo Checked: Bob Lucky Light Electronics Co., Ltd Date: Dec/05/1990 Page: 3 OF 6 Drawn: Jiang Http://www.luckylight.cn LUCKY LIGHT Absolute Maximum Ratings at Ta=25℃ Parameter MAX. Unit Power Dissipation 100 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 100 mA Continuous Forward Current 30 mA Derating Linear From 50℃ 0.4 mA/℃ Reverse Voltage 5 V Operating Temperature Range -40℃ to +80℃ Storage Temperature Range -40℃ to +80℃ Lead Soldering Temperature [4mm(.157”) From Body] 260℃ for 5 Seconds Electrical Optical Characteristics at Ta=25℃ Parameter Symbol Min. Typ. Max. Unit Test Condition Iv 1.0 4.0 --- mcd IF=10mA (Note 1) 2θ1/2 --- 100 --- Deg (Note 2) Peak Emission Wavelength λp --- 588 --- nm IF=20mA Dominant Wavelength λd --- 585 --- nm IF=20mA (Note 3) Spectral Line Half-Width △λ --- 22 --- nm IF=20mA Forward Voltage VF --- 2.1 2.4 V IF=20mA Reverse Current IR --- --- 10 µA VR=5V Luminous Intensity Viewing Angle Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Spec No: VET1003 Rev No:V.1 Approved: JoJo Checked: Bob Lucky Light Electronics Co., Ltd Date: Dec/05/1990 Page: 4 OF 6 Drawn: Jiang Http://www.luckylight.cn LUCKY LIGHT Typical Electrical / Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Spec No: VET1003 Rev No:V.1 Approved: JoJo Checked: Bob Lucky Light Electronics Co., Ltd Date: Dec/05/1990 Page: 5 OF 6 Drawn: Jiang Http://www.luckylight.cn LUCKY LIGHT Rliability test ltems and conditions: No Item Test Condition Test House/Cycle Sample Size 1 Solder Heat TEMP:260℃ ±5℃ 10 Sec 76 pcs 0/1 2 Temperature Cycle 300 Cycle 76pcs 0/1 3 Themal Shock 300 Cycle 76pcs 0/1 Temp:100℃ 1000Hrs 76pcs 0/1 Temp:-40℃ 1000Hrs 76pcs 0/1 If=20mA 1000Hrs. 76pcs 0/1 85℃/85%RH 1000Hrs. 76pcs 0/1 4 5 6 7 High Temperature Storage Low Temperature Storage DC Operating Life High Temperature/ High Humidity H:+100℃ 15min∫ 5min L:-40℃ 15min H:+100℃ 5min∫ 10 sec L:-10℃ 5min Spec No: VET1003 Rev No:V.1 Approved: JoJo Checked: Bob Lucky Light Electronics Co., Ltd Ac/Re Date: Dec/05/1990 Page: 6 OF 6 Drawn: Jiang Http://www.luckylight.cn