LUGUANG GBU601

GBU601-GBU607
Single Phase 6.0AMP.Glass Passivated Bridge Rectifiers
GBU
Features
Ideal for printed circuit board
Reliable low cost construction
Plastic material has Underwriters Laboratory
Flammability Classification 94V-0
High case dielectric strength of 1500VRMS
Surge overload rating to 175 amperes peak
High temperature soldering guaranteed:
260oC / 10 seconds / .375”, (9.5mm) lead
lengths at 5 lbs., (2.3kg) tension
Mechanical Data
Case: Molded plastic body.
Weight: 0. 3 ounce, 8.0 grams
Mounting torque: 5 in. lb. max.
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Symbol GBU GBU GBU GBU GBU GBU GBU Units
601 602 603 604 605 606 607
VRRM
50
100 200 400 600 800 1000
V
VRMS
35
70
140 280 420 560 700
V
VDC
50
100 200 400 600 800 1000
V
Maximum Average Forward Rectified Current
@TC = 100 oC
Peak Forward Surge Current, 8.3 ms Single
Half Sne-wave Superimposed on Rated Load
(JEDEC method )
Maximum Instantaneous Forward Voltage
@ 3.0A
@ 6.0A
Maximum DC Reverse Current @ TA=25 oC
at Rated DC Blocking Voltage @ TA=125 oC
Typical Junction Capacitance (Note 3)
Typical Thermal Resistance (Note 1, 2)
Operating Temperature Range
I(AV)
6.0
A
IFSM
175
A
VF
1.0
1.1
5.0
500
V
IR
Cj
RθJA
RθJC
TJ
211
94
7.0
2.0
-55 to +150
-55 to + 150
Storage Temperature Range
TSTG
1. Mounted on Al. Plate Heatsink of 2” x 3” x 0.25”.
Notes:
2. Bolt on Heatsink with silicone Thermal Compound for Maximum Heat Transfer with #6 Screws.
3. Measured at 1.0 MHZ and Applied Reverse Voltage of 4.0 Volts.
http://www.luguang.cn
uA
uA
pF
mail:[email protected]
o
C/W
o
o
C
C
GBU601-GBU607
Single Phase 6.0AMP.Glass Passivated Bridge Rectifiers
RATINGS AND CHARACTERISTIC CURVES (GBU601 THRU GBU607)
FIG.2- TYPICAL REVERSE CHARACTERISTICS
PER BRIDGE ELEMENT
FIG.1-MAXIMUM FORWARD CURRENT DERATING
CURVE
500
4
2
HEAT-SINK MOUNTG
2.6 x 1.4 x 0.06" THK
(6.5 x 3.5 x 0.15 cm)AI. PLATE
0
50
0
100
150
o
CASE TEMPERATURE. ( C)
INSTANTANEOUS REVERSE CURRENT. (mA)
AVERAGE FORWARD CURRENT. (A)
6
100
Tj=125 0C
10
1
0.1
Tj=25 0C
FIG.3- MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT PER BRIDGE ELEMENT
50-400V
600-1000V
0.01
0
80
100
20
40
60
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
150
125
Tj=150 C
8.3ms Single Half Sine Wave
100
FIG.4- TYPICAL JUNCTION CAPACITANCE
500
Tj=25 0C
75
300
50
25
0
1
100
2
10
5
20
NUMBER OF CYCLES AT 60Hz
100
50
FIG.5- TYPICAL FORWARD CHARACTERISTICS
PER BRIDGE ELEMENT
JUNCTION CAPACITANCE.(pF)
PEAK FORWARD SURGE CURRENT. (A)
175
GBU601-GBU604
250
200
150
100
GBU605-GBU607
50
0
0.1
0.5
1
2
5
10
20
50 100
INSTANTANEOUS FORWARD CURRENT. (A)
REVERSE VOLTAGE. (V)
40
20
10
4
2
1
0.4
Tj=25 0C
Pulse Width=300ms
1% Duty Cycle
0.2
0.1
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
INSTANTANEOUSFORWARD VOLTAGE. (V)
http://www.luguang.cn
mail:[email protected]
200
500 800