KBP005-KBP10 Silicon Bridge Rectifiers VOLTAGE RANGE: 50 --- 1000 V CURRENT: 2.0 A KBP Features 1.8 TYP. 1.8 TYP. 4.8± 0.2 1.5 TYP. Rating to 1000V PRV Surge overload rating to 50 Amperes peak 14.5± 0.5 3.2 45° 11.2± 0.5 Ideal for printed circuit board + AC - 15.2 MIN 1.0 TYP. plastic technique results in inexpensive product Lead solderable per MIL-STD-202 method 208 Plastic material has UL flammability classification 12.7 MIN Reliable low cost construction utilizing molded φ 0.8± 0.1 3.7± 0.25 94V-O 3.7± 0.25 Weight: 0.050 ounces,1.42 grams Dimensions in millimeters Glass passivated chip junctions MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. KBP005 KBP01 KBP02 KBP04 KBP06 KBP08 KBP10 UNITS Maximum recurrent peak reverse voltage V RRM 50 100 200 400 600 800 1000 V Maximum RMS voltage V RMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 V Maximum average forw ard Output current @TA=25 IF(AV) 2.0 A IFSM 50.0 A VF 1.1 V 10.0 μA 1.0 mA Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load Maximum instantaneous forw ard voltage @ 1.0 A Maximum reverse current at rated DC blocking voltage @TA=25 @TA =100 Operating junction temperature range Storage temperature range IR TJ - 55 ---- + 125 TSTG - 55 ---- + 150 http://www.luguang.cn mail:[email protected] KBP005-KBP10 Silicon Bridge Rectifiers Ratings AND Charactieristic Curves FIG.2 -- FORWARD DERATING CURVE VVNVVOUTPUT RECTIFIED CURRENT AVERAGE FORWARD OUTPUT CURRENT, AMPERSE PEAK FORWARD SURGE CURRENT, AMPERSE FIG.1 -- PEAK FORWARD SURGE CURRENT 50 40 8.3ms Single Half Sine Wave 30 20 10 0 1 10 100 2.0 1.2 0.8 COPPERPADS PCB (12mm x 12mm) 0.4 0 NUMBER OF CYCLES AT 60HZ T =125 J Pulse Width =300uS 0.2 0.4 0.6 0.8 1.0 1.2 60 80 100 120 140 150 10 1.0 TJ=100 0.1 TJ=25 .01 0 20 40 60 80 100 120 140 1.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS http://www.luguang.cn 40 FIG.4 -- TYPICAL REVERSE CHARACTERISTIC INSTANTANEOUS REVERSE CURRENT, MICRO AMPERSE 1.0 AMPERSE INSTANTANEOUS FORWARD CURRENT, 10 0 20 AMBIENT TEMPERATURE, FIG.3 -- TYPICAL FORWARD CHARACTERISTIC 0.1 Resislive or Inductive Load 1.6 PERCENT OF RATED PEAK REVERSE VOLTAGE mail:[email protected]