SMF5V0A-SMF51A Surface Mount ESD Protection Diodes BREAKDOWN VOLTAGE : 6.40 - 56.70 V PEAK PULSE POWER : 200 W SOD - 123FL Features ◇ ◇ For surface mounted applications Low profile package ◇ Low incremental surge resistance,excellent ◇ clamping capability 200W peak pulse power capability with a Cathode Band Top View 1.8 0.1 1.0 0.2 5° 2.8 0.1 0.05 0.30 0.98 0.1 10/1000µs wave from,repetition rate (duty 5 0.60 0.25 cycle):0.01% ◇ High temperature soldering guaranteed: 260℃/10 seconds, at terminals 3.7 0.2 Mechanical Data ◇ Case: JEDEC SOD-123FL, molded plastic ◇ Polarity: Color band denotes positive end Dimensions in inches and (millimeters) ( cathode ) except for bidirectional ◇ Marking code: see TABLE 1 ◇ Weight:0.006 ounces, 0.02 gram ◇ Mounting position: Any ABSOLUTE MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified SYMBOL VALUE UNITS Non-repetitive peak pulse power dissipation with a 10/1000µs waveform (NOTE 1) PPPM 200 W Peak pulse current 10/1000 µs wavefrom (NOTE 1) IPPM See Table1 A VF 3.5 V Thermal resistance junction to ambient RθJA 180 K/W Operating temperature junction range TJ - 55 to +150 ℃ TSTG - 55 to +150 ℃ Forw ard voltage @ IF=12A Storage temperature range NOTE:(1)Non-repetitive current pulse and derated above TA=25℃ http://www.luguang.cn mail:[email protected] SMF5V0A-SMF51A Surface Mount ESD Protection Diodes ELECTRICAL CHARACTERISTICS(Ratings at TJ=25℃ unless otherwise specified)uni-birectional only 2) Marking Code UNI V(BR)1) IT VWM ID@VWM IPPM Vc@IPPM V Min mA V µA A V SMF5V0A AE 6.40 10 5.0 400 21.7 9.2 SMF6V0A AG 6.67 10 6.0 400 19.4 10.3 SMF6V5A AK 7.22 10 6.5 250 17.9 11.2 SMF7V0A AM 7.78 10 7.0 100 16.7 12.0 SMF7V5A AP 8.33 1.0 7.5 50 15.5 12.9 SMF8V0A AR 8.89 1.0 8.0 25 14.7 13.6 SMF8V5A AT 9.44 1.0 8.5 10 13.9 14.4 SMF9V0A AV 10.0 1.0 9.0 5.0 13.5 15.4 SMF10A AX 11.1 1.0 10 2.5 11.8 17.0 SMF11A AZ 12.2 1.0 11 2.5 11.0 18.2 SMF12A BE 13.3 1.0 12 2.5 10.1 19.9 SMF13A BG 14.4 1.0 13 1.0 9.3 21.5 SMF14A BK 15.6 1.0 14 1.0 8.6 23.2 SMF15A BM 16.7 1.0 15 1.0 8.2 24.4 SMF16A BP 17.8 1.0 16 1.0 7.7 26.0 SMF17A BR 18.9 1.0 17 1.0 7.2 27.6 SMF18A BT 20.0 1.0 18 1.0 5.8 29.2 SMF20A BV 22.2 1.0 20 1.0 6.2 32.4 SMF22A BX 24.4 1.0 22 1.0 5.6 35.5 SMF24A BZ 26.7 1.0 24 1.0 5.1 38.9 SMF26A CE 28.9 1.0 26 1.0 4.8 42.1 SMF28A CG 31.1 1.0 28 1.0 4.4 45.4 SMF30A CK 33.3 1.0 30 1.0 4.1 48.4 SMF33A CM 36.7 1.0 33 1.0 3.8 53.3 SMF36A CP 40.0 1.0 36 1.0 3.4 58.1 SMF40A CR 44.4 1.0 40 1.0 3.1 64.5 SMF43A CT 47.8 1.0 43 1.0 2.9 69.4 SMF45A CV 50.0 1.0 45 1.0 2.8 72.7 SMF48A CX 53.3 1.0 48 1.0 2.6 77.4 SMF51A CZ 56.7 1.0 51 1.0 2.4 82.4 Type Notes: (1)Pulse test tp≤5.0ms (2)Surge current waveform 10/1000 µs http://www.luguang.cn mail:[email protected] SMF5V0A-SMF51A Surface Mount ESD Protection Diodes Ratings AND Charactieristic Curves FIG.2 -- PULSE DERATING CURVE 10 1.0 0.1 0.1μs 1µs 10µ s 100µ s 1ms 10ms DERATING IN PERCENTAGE, % NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 TA=25 100 75 50 H HHHHHHHH H (I PPM) 100 PEAK PULSE POWER (P PP) OR CURRENT PPPM, PEAK PULSE POWER, KW FIG.1 -- PEAK PULSE POWER RATING CURVE 25 0 0 td, PULSE WIDTH, SEC 25 50 75 100 125 IPPM, PEAK PULSE CURRENT, %IRSM 150 TJ = 25 °C Pulse Width (td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 Half Value - IPP 2 IPPM 50 10/1000µsec. Waveform as defined by R.E.A. td 0 0 1.0 2.0 175 TA, AMBIENT TEMPERATURE. FIG.3 -- PULSE WAVEFORM tr = 10 µs 150 3.0 4.0 HHHHHH H t, TIME, ms http://www.luguang.cn mail:[email protected] 200