MT2030-RG-A (White Diffused) - Standard LEDs This red & green Bi-color LED is made with a Gallium Phosphide red chip and a Gallium Phosphide green chip with a white diffused epoxy resin. SELECTOR GUIDE Part Number Dice Lens Color / Type Pack Size View Angle 2θ 1/2 MT2030-RG-A Red Green White Diffused 3mm Round Bicolor 118 ° ELECTRICAL / OPTICAL CHARACTERISTICS AT T A=25°C Parameter Symbol Forward Voltage VF Reverse Current IR Luminous Intensity IV Peak Wavelength λpeak Dominant Wavelength Spectral Line Half-Width λD ∆λ1/2 Device Red Green Red Green Red Green Red Green Red Green Red Green Min. Typ. Max. - 2.1 2.1 - - 3.0 2.6 50 50 .622 6.22 1.2 12.0 700 567 650 573 100 30 - Units Test Conditions V 20mA μA 5V - mcd 20mA - nm 20mA - nm 20mA - nm 20mA ABSOLUTE MAXIMUM RATINGS AT TA=25°C Parameter Rating 30 30 90 78 5 5 -20 ~ +85 -40 ~ +100 Forward Current ( IF ) Power Dissipation ( PD ) Reverse Voltage ( VR ) Operating Temperature ( T OPR ) Storage Temperature ( TSTG ) Lead Solder Temperature ( T SOL ) Units mA mW V °C °C 260 @ for 5 sec. max 1. All Dimensions Are In Millimeters (inches). 2. Tolerance Is +-0.25(0.01") Unless Otherwise Noted. 3. Specifications Are Subject To Change Without Notice. Marktech Optoelectronics | 3 Northway Lane North | Latham, NY 12110 | www.marktechopto.com Page 1 of 3 MT2030-RG-A (White Diffused) - Standard LEDs Marktech Optoelectronics | 3 Northway Lane North | Latham, NY 12110 | www.marktechopto.com Page 2 of 3 MT2030-RG-A (White Diffused) - Standard LEDs Marktech Optoelectronics | 3 Northway Lane North | Latham, NY 12110 | www.marktechopto.com Page 3 of 3