Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3205172210 Item: DIP05-1A72-10A Conditions Coil Data at 20 °C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Contact-No. Contact-form Contact-material Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacity Special Product Data Number of contacts Contact - form Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Capacity Coil/Contact Case colour Housing material Connection pins Typ Min Typ Max Unit Max Unit operating temperature + self heating Conditions Contact data 66/3 Min 66/3 A Iridium !" #$ $" "% & not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ' ( ) *$ Start Value ' $ , Start Value + ", ) $, ( % !$ $" RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch ( ( . Conditions Min Typ Max Unit 1 A - NO according to IEC 255-5 RH <45%, 200 VDC measuring voltage @ 10 kHz / 0 . black epoxy resin FeNi-alloy tin plated Modifications in the sense of technical progress are reserved Designed at: 26.04.04 Designed by: SCHELLHORN Approval at: 28.08.09 Approval by: KOLBRICH Last Change at: 29.10.10 Last Change by: THAUKE Approval at: 29.10.10 Approval by: JHEYDER Version: 2 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3205172210 Item: DIP05-1A72-10A Special Product Data Conditions Min Typ Approval Reach / RoHS conformity Remark Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Unit Max Unit yes Conditions Min Typ 1/2 sine, duration 11ms, in 3 axis from 10 - 2000 Hz 3 3 wave soldering max. 5 sec. 4 5 1 1 2 2 2 fully sealed Conditions General data Max Min Total weigth Packaging Typ Max Unit 1 Tube per 25 pcs. Modifications in the sense of technical progress are reserved Designed at: 26.04.04 Designed by: SCHELLHORN Approval at: 28.08.09 Approval by: KOLBRICH Last Change at: 29.10.10 Last Change by: THAUKE Approval at: 29.10.10 Approval by: JHEYDER Version: 2