Europe: +49 / 7731 8399 0 | Email: [email protected] USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] Item No.: 9231801015 Item: MK23-80-B-2 Preliminary Datasheet Modifications in the sense of technical progress are reserved Designed at: 18.10.06 Designed by: AKELLER Approval at: Last Change at: 14.07.11 Last Change by: KSTOPPEL Approval at: 18.10.06 Approval by: Approval by: RKAMP Version: 12 Europe: +49 / 7731 8399 0 | Email: [email protected] USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] Item No.: 9231801015 Item: MK23-80-B-2 Preliminary Datasheet Magnetic properties Conditions Min Typ Pull-In excitation (Reference value) measured in coil- "define operation" Test equipment Testing 100% Pull-In excitation (modified contact) phys. conditioned tolerance of +/- 1 AT Test equipment Testing 100% Pull-In in milliTesla (modified conta phys. caused tolerance +/- 0,1mT Contact-No. Contact-form Contact-material Contact-rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacitance Special Product Data Shock Vibration Operating temperature Storage temperature Soldering Temperature Tsold Min Typ Unit 80 A Rhodium ! "# not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ! & ' ( ) & &) Start Value !* )!+ ! & * Start Value $ " % ! % ,% " RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz above open switch -. Conditions Min Typ Max Unit Max Unit yes Conditions Min Typ 1/2 sine, duration 11ms, in 3 axis from 10 - 2000 Hz ' 1 1 Reflow according IPC/JEDEC J-STD-0 Conditions General data Max KMS-22 Reach / RoHS conformity Environmental data Unit KMS-01 Conditions Contact data 80 Max Min Total weigth Packaging Typ Max / / 0 0 0 Unit / Tape & Reel 2500 pcs. Modifications in the sense of technical progress are reserved Designed at: 18.10.06 Designed by: AKELLER Approval at: Last Change at: 14.07.11 Last Change by: KSTOPPEL Approval at: 18.10.06 Approval by: Approval by: RKAMP Version: 12