ID-XH30S-1W Series 3000V DC ISOLATED & REGULATED TWIN OUTPUT DC-DC CONVERTER 1W,FIXED INPUT, INPUT,3 000VDC PRODUCT PROGRAM Input Part Number FEATURES ◆Available inputs:5,12&24VDC ◆Available outputs:3.3&5VDC Output Voltage(VDC) (Vo1 & Vo2) Voltage Efficiency Current(MA) (%,Typ) Nominal Range (VDC) ID050303XH30S-1W 5 4.5-5.5 3.3 100 10 62 ID050505XH30S-1W 5 4.5-5.5 05 152 15 64 ID120303XH30S-1W 12 10.8-13.2 3.3 100 10 62 ID120505XH30S-1W 12 10.8-13.2 05 152 15 65 ID240303XH30S-1W 24 21.6-26.4 3.3 100 10 62 ID240505XH30S-1W 24 21.6-26.4 05 152 15 65 Max Min. Electrical Specifications (Typical at +25℃, nominal input voltage, rated output current unless otherwise specified) ◆SIP10 package ◆Temperature range: -40℃~+85℃ COMMON SPECIFICATIONS ◆3KVDC isolation Item ◆No Heat sink required Test Conditions Min. Typ. Storage humidity range Max. Units 90 % ◆No external component required Operating temperature -40 85 ◆ Industry standard pinout Storage temperature -55 125 ◆ RoHS Compliance Temp. rise at full load Derating 15 MODEL SELECTION ② ③ ④ ⑤ ⑥ ⑦ ID 05 05 05 X H30 S -1W ①Product Series ③The 1st Output Voltage ⑤Fixed Input ⑦SIP10 Package Style 1 Cooling ⑧ ②Input Voltage ④The 2nd Output Voltage ⑥3KVDC isolation ⑧Rated Power The ID-XH30S-1W Series are specially designed for applications where a group of polar power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) Where the voltage of the input power supply is fixed (voltage variation ≤±10%); 2) Where isolation is necessary between input and output (isolation voltage ≤3000VDC); S Free air convection Case material Plastic(UL94-V0) Weight 5.2 g *Supply voltage must be discontinued at the end of short circuit duration. ISOLATION SPECIFICATIONS Item APPLICATIONS 25 See graph Short circuit protection* ① ℃ Test Conditions Min. Rated voltage Typ. Max. Units 3000 VDC MΩ Leakage current Tested for 1 minute and 1mA max Isolation resistance (Vin/Vout) Test at 500VDC 1000 Isolation resistance (Vo1/Vo2) Test at 500VDC 1000 MΩ Isolation capacitance(Vin/Vout) 80 pF Isolation capacitance(Vo1/Vo2) 80 pF OUTPUT SPECIFICATIONS Item Test Conditions Output power Min. Typ. 0.1 Units 1 W Line regulation ±0.4 % Load regulation ±0.3 % 75 % Efficiency 60 Output voltage accuracy MICRODC reserves the copyright Max. Temperature drift 100% full load Ripple & Noise* 20MHz Bandwidth Switching frequency Full load, nominal input ±1 % ±0.02 %/℃ 50 mVp-p 45 KHz *Test ripple and noise by "Parallel cable"method. http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 2 ID-XH30S-1W Series OUTLINE DIMENSIONS ＆ FOOTPRINT DETAILS MECHANICAL DIMENSIONS DERATING GRAPH RECOMMENDED FOOTPRINT Top view,grid:2.54mm(0.1inch) Diameter:1.00mm(0.039inch) Unit:mm[ inch] ±0.10mm[ ±0.004inch] Pin sect ion tolerances: tolerances:± 0.10mm[± ±0.25mm[ ±0.010inch] General tolerances: tolerances:± 0.25mm[± TUBE OUTLINE DIMENSIONS FOOTPRINT DETAILS 10 PIN SIP Pin Function 1 +Vin 2 -Vin 7 +VOUT1 8 -VOUT1 9 +VOUT2 10 -VOUT2 Unless otherwise stated all dimensions in inches (mm) ±0.5mm. Tube length (10 Pin SIP) : 18PCS (520mm ±2mm). Tube Quantity :25 RoHS COMPLIANT INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are backward compatible with Sn/Pb soldering systems. Microdc Professional Power Module,Inc. Tel:0086-20-86000646 REACH COMPLIANT INFORMATION E-mail:[email protected] Website:http://www.microdc.cn http://www.microdc.cn This series has proven that this product does not contain harmful chemicals, it also has harmful chemical substances through the registration, inspection and approval. Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 2