RSM-XS&RSM-XLS Series 0.1 Watt,FIXED INPUT, ISOLATED AND UNREGULATED (SIP4&SIP7) Single Output DC/DC-Converter Model Single output Model Input Voltage (V) Output Voltage (V) Output Current max (MA) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) RSM0503XS 4.5-5.5 3.3 30.3 1000 100 66 RSM0505XS 4.5-5.5 5 20 1000 100 66 RSM0507XS 4.5-5.5 7.2 13.8 1000 100 66 RSM0509XS 4.5-5.5 9 11 1000 100 68 RSM0512XS 4.5-5.5 12 8.33 1000 100 68 RSM0515XS 4.5-5.5 15 6.67 1000 100 68 RSM0518XS 4.5-5.5 18 5.56 1000 100 68 RSM0524XS 4.5-5.5 24 4.17 1000 100 70 RSM1203XS 10.8-13.2 3.3 30.3 1000 100 66 RSM1205XS 10.8-13.2 5 20 1000 100 67 RSM1207XS 10.8-13.2 7.2 13.8 1000 100 68 RSM1209XS 10.8-13.2 9 11 1000 100 68 RSM1212XS 10.8-13.2 12 8.33 1000 100 68 RSM1215XS 10.8-13.2 15 6.67 1000 100 69 RSM1218XS 10.8-13.2 18 5.56 1000 100 70 RSM1224XS 10.8-13.2 24 4.17 1000 100 72 RSM1505XS 13.5 – 16.5 5 20 1000 100 70 RSM2403XS 21.6-26.4 3.3 30.3 1000 100 67 RSM2405XS 21.6-26.4 5 20 1000 100 67 RSM2407XS 21.6-26.4 7.2 13.8 1000 100 67 RSM2409XS 21.6-26.4 9 11 1000 100 69 RSM2412XS 21.6-26.4 12 8.33 1000 100 69 RSM2415XS 21.6-26.4 15 6.67 1000 100 69 RSM2418XS 21.6-26.4 18 5.56 1000 100 69 or downloaded, data sheet are no longer controlled by microdc; RSM2424XS 21.6-26.4 24 4.17 1000 100 69 refer RSM0303XLS 3.0-3.6 3.3 30.3 1000 100 62 specifications. RSM0305XLS 3.0-3.6 5 20 1000 100 65 2. Product labels shown, including safety agency certifications RSM0505XLS 4.5-5.5 5 20 1000 100 64 on labels, may vary based on the date manufactured. RSM0509XLS 4.5-5.5 9 11 1000 100 65 3. Mechanical drawings and specifications are for reference RSM0512XLS 4.5-5.5 12 8.33 1000 100 67 only. RSM0515XLS 4.5-5.5 15 6.67 1000 100 65 RSM1203XLS 10.8-13.2 3.3 30.3 1000 100 62 RSM1205XLS 10.8-13.2 5 20 1000 100 65 RSM1209XLS 10.8-13.2 9 11 1000 100 66 RSM1212XLS 10.8-13.2 12 8.33 1000 100 67 RSM1215XLS 10.8-13.2 15 6.67 1000 100 66 limited information are considered proprietary and may not be RSM2405XLS 21.6-26.4 5 20 1000 100 63 available for release. RSM2409XLS 21.6-26.4 9 11 1000 100 63 6. This product is not designed for use in critical life support RSM2412XLS 21.6-26.4 12 8.33 1000 100 65 systems, equipment used in hazardous environments, nuclear RSM2415XLS 21.6-26.4 15 6.67 1000 100 65 control systems or other such applications which necessitate RSM2424XLS 21.6-26.4 24 4.17 1000 100 64 FEATURES ◆ ◆ ◆ ◆ RoHS compliant 4 Pin SIP or 7 Pin SIP Package Style Low ripple and noise High efficiency up to 78% ◆ Operating temperature -40℃ to +85℃ ◆ Input / Output isolation 1000VDC ◆ Pin compatible with multiple Manufacturers MODEL SELECTION RSM①05②03③X④ S⑤ RSM①05②03③X④ LS⑥ ①Product Series ③Output Voltage ⑤SIP4 Package ②Input Voltage ④Fixed Input ⑥SIP7 Package APPLICATIONS 1. Data sheet are updated as needed and as such, specifications are subject to change without notice. Once printed to www.microdc.cn for the most current product 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,nominal input voltage and at rated output load unless otherwise specified. 5. microdc may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document.CAS numbers and other specific safety and regulatory standards other the ones listed in this data sheet. 7. Warranty is in accordance with microdc’s standard Terms of NOTE: All specifications in this data sheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Sale available at www.microdc.cn. MICRODC R ESERVES THE COPYRIGHT http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 4 RSM-XS&RSM-XLS Series Input Specifications Parameters Voltage range Nominal Typical 03 3.0-3.6 05 4.5-5.5 12 10.8-13.2 15 13.5–16.5 24 21.6-26.4 Filter Maximum Units VDC Capacitor Turn on transient process time 25 Start up time ms 200 Absolute maximum rating 5 Vin 7 12 Vin 15 15 Vin 17 24 Vin 28 Peak input voltage time ms VDC 100 ms General Specifications Parameters Conditions Typical Switching frequency 100% load 80 Operating temperature Without derating Storage temperature Maximum KHz -40 to +85 ℃ -40 to +125 ℃ Maximum case temperature Cooling 100 ℃ 95 % Free air convection Humidity Case material Weight Units Non-conductive black plastic (RSM-XS)SIP 4 1.5 g (RSM-XLS)SIP 7 2.1 g Dimensions (Lx W x H) RSM-XS(SIP4) 0.46 x 0.38 x 0.24 inches RSM-XLS(SIP7) 0.772 x 0.374 x 0.24 inches 11.68 x9.65 x6.00 mm 19.6 x 9.50 x6.00 mm >2 010 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 ℃) MTBF Output Specifications Parameters Conditions Voltage accuracy Typical Maximum ±3 Short circuit protection Units % Momentary (1sec) Line voltage regulation For 1% change of Vin ±1.2 % of Vin Load voltage regulation Load 20 – 100% ±10 % Load 20 – 100% ±20 % ±0.02 %/ C 100 mV p-p Load voltage regulation 3.3V output model Temperature coefficient Ripple & noise At 20MHz Bandwidth Capacitive load Rising time http://www.microdc.cn 100 50 Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 μF ms Page 2 of 4 RSM-XS&RSM-XLS Series Isolation Specifications Parameters Conditions Tested I/O voltage 3 sec Typical Rated Units 1000 VDC Resistance > 1000 MOhm Capacitance 60 pF Products Dimensions RSM-XS Unit:mm(inch) Pin section tolerances:±0.10mm(±0.004inch) General tolerances:±0.25mm(±0.010inch) RSM-XLS Unit:mm(inch) Pin section tolerances:±0.10mm(±0.004inch) General tolerances:±0.25mm(±0.010inch) Recommended footprint details Recommended footprint details 4 PIN SIP Package 7 PIN SIP Package Top view:grid 2.54*2.54(0.1*0.1inch) Diameter:1.00mm(0.039inch) Pin Out Specifications Pin Out Specifications RSM-XS RSM-XLS Pin Single Pin Single 1 - V Input 1 +V Input 2 +V Input 2 -V Input 3 -V Output 4 -V Output 4 +V Output 6 +V Output http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 3 of 4 RSM-XS&RSM-XLS Series TUBE OUTLINE DIMENSIONS TUBE OUTLINE DIMENSIONS 4 PIN SIP Tube 7 PIN SIP Tube Unless otherwise stated all dimensions in inches (mm) ±0.5mm. Unless otherwise stated all dimensions in inches (mm) ±0.5mm. Tube length (4 Pin SIP) :12 (520mm ±2mm). Tube Quantity :45 Tube length (7 Pin SIP) :20.47 (520mm ±2mm). Tube Quantity :25 RoHS COMPLIANT INFORMATION Microdc Professional Power Module,Inc. This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C Tel:0086-20-86000646 E-mail:[email protected] for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Website:http://www.microdc.cn Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are Microdc Professional Power module,Inc.makes no representation that backward compatible with Sn/Pb soldering systems. the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or REACH COMPLIANT INFORMATION future patent rights. Specifications are subject to change without notice. This series has proven that this product does not contain harmful chemicals, it also has harmful chemical ©2010 substances through the registration, inspection and approval. Microdc Professional Power Module, Inc. Guangzhou http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 4 of 4