WRA-YMD-15W&WRB-YMD-15W Series 15W, WIDE INPUT, ISOLATED®ULATED SINGLE/DUAL OUTPUTDC-DC CONVERTER SELECTION GUIDE Input FEATURES Output Voltage(VDC) Order code Voltage (VDC) Current (mA) Efficiency (%) Capacitor Load Max Nominal Range Max.* WRA1205YMD-15W 12 9 -18 20 ±5 ±1500 82 ±1020 WRA1212YMD-15W 12 9 -18 20 ±12 ±625 85 ±495 WRA1215YMD-15W 12 9 -18 20 ±15 ±500 85 ±165 WRB1203YMD-4000 12 9 -18 20 3.3 4000 79 10500 ◆Wide (2:1)Input Range WRB1205YMD-15W 12 9 -18 20 5 3000 82 4020 ◆1.5KVDC Input/Output Isolation WRB1212YMD-15W 12 9 -18 20 12 1250 85 1035 WRB1215YMD-15W 12 9 -18 20 15 1000 84 705 WRA2405YMD-15W 24 18 -36 40 ±5 ±1500 84 ±1020 ◆Operating Temperature: -40°C to+85°C WRA2412YMD-15W 24 18 -36 40 ±12 ±625 86 ±495 ◆Internal SMD construction WRA2415YMD-15W 24 18 -36 40 ±15 ±500 86 ±165 WRB2403YMD-4000 24 18 -36 40 3.3 4000 80 10500 ◆Efficiency up to 87% ◆Short Circuit Protection (automatic recovery) ◆Metal Shielding Package WRB2405YMD-15W 24 18 -36 40 5 3000 83 4020 ◆Industry Standard Pinout WRB2412YMD-15W 24 18 -36 40 12 1250 85 1035 ◆MTBF>1,000,000 hours WRB2415YMD-15W 24 18 -36 40 15 1000 85 705 ◆RoHS Compliance WRA4805YMD-15W 48 36- 75 80 ±5 ±1500 85 ±1020 WRA4812YMD-15W 48 36- 75 80 ±12 ±625 87 ±495 WRA4815YMD-15W 48 36- 75 80 ±15 ±500 87 ±165 MODEL SELECTION WRB4803YMD-4000 48 36- 75 80 3.3 4000 81 10500 ① ② ③ ④ ⑤ ⑥ ⑦ WRB 24 05 Y M D -15 15W W(3000) WRB4805YMD-15W 48 36- 75 80 5 3000 83 4020 WRB4812YMD-15W 48 36- 75 80 12 1250 86 1035 WRB4815YMD-15W 48 36- 75 80 15 1000 86 705 ①Product Series ②Input Voltage ③Output Voltage ④Wide (2:1) Input Range ⑤Metal Shield ⑥2"×1" DIP Package ⑦Rated Power(Output current) *Input voltage can’t exceed this value, or will cause the permanent damage. INPUT SPECIFICA TIONS Parameter APPLICATIONS Start-up volt age The WRA_YMD-15W & WRB_YMD-15W series offer 15W of output,the WRA_YMD-15W&WRB_YMD-15W series with 2:1 Test conditions Min. Typ. Max. 12 Vin models 9 24 Vin models 17.8 48 Vin models 35.8 Input filter Units VDC L-C Start-up time 10 mS wide input voltage of 9-18,18-36 and 36-75VDC and features 1500VDC isolation, short -circuit and over current protect ion,as well as six sided shielding. All models are particularly suited to OUTPUT SPECIFICA TIONS tele-communications , industrial , test equipments power . Parameter Test conditions Typ. Max. Units ±1 ±3 % From 10% to 100% load ±0.5 ±1 % Input voltage from low to high ±0.2 ±0.5 % Output voltage accuracy Refer to recommended circuit Load regulation Line regulation Mi ±5 % 75 150 mV 200 300 uS ±3 ±5 %Vo 130 150 % Cross regulation(Dual) Ripple and noise Transient recovery time Transient peak deviation 20MHz Bandwidth 25% load step change Over current protection Input voltage range Output Short Circuit Input voltage range 120 Hiccup, automatic recovery Trim ±10%Vo Temperature drift (Vout) ±0. 02 VDC ±0. 03 MICRODC reserves the copyright http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 3 %/℃ WRA-YMD-15W&WRB-YMD-15W Series COMMONTSPECIFICA T IONS Parameter Test conditions DERATING & EFFICIENCY CURVE Min. Typ. Storage Humidity Operating Temperature -40 Storage Temperature -55 Max Units 95 % 85 °C 105 °C Temp. Rise at Full Load Case surface 50 Lead Temperature 1.5mmfrom case for 10seconds Isolation voltage Tested f or 1 minute and 1mA max 1500 Isolation resistance Test at 500VDC 1000 Isolation capacitance 100KHz / 0.1V 1000 pF Switching Frequency Nominal, full load 500 KHz MTBF °C 300 °C VDC MΩ 1000 Cooling 1. Temperature derating curve K hours Free Air Convection Case material Nickel-coat ed copper Weight 30 g 2. Efficiency Vs Input voltage WRA2412YMD-15W APPLICATION NOTE Efficiency VS Input voltage Recommended circuit All the WRA_YMD-15W&WRB_YMD-15W Series have been tested according to the following recommended testing circuit before leaving factory . This series should be tested under load. Never be test ed under no load (see Figure 1). 3. Efficiency Vs Output Power WRA2412YMD-15W If you want to further decrease the output ripple, you can increase capacitance properly or choose Efficiency VS Output load capacitors with low ESR. However, the capacitance can't exceed the maximum capacitor load in the list. Recommended capacitance To ensure these series can operate efficiently and reliably, the recommended capacitance of input and output sees the below table. OUTPUT VOLTAGE TRIM UP/DOWN http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 3 WRA-YMD-15W&WRB-YMD-15W Series OUTLINE DIMENSIONS& FOOTPRINT DETAILS MECHANICAL DIMENSIONS RECOMMENDED FOOTPRINT TUBE OUTLINE DIMENSIONS Not e: Unit : mm[inch] Pi n diameter tolerances:±0.10mm[±0.004 inch] General tolerances:±0.25mm[±0.010 inch] Note: 1. All specifications are measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. In this data sheet , all the test methods of indications are based on corporate standards. 3. Only typical model listed. Non-standard models will be different from the above, please contact us for more details. 4. The products cannot be used in parallel and in plug and play . 5. The CTRL control pin voltage is referenced to GND. 6. Capacitor or MAX load tested at nominal input voltage and constant resistive load. 7. Refer to the diagram of Output Voltage trim up/ down for trim applications. RoHS COMPLIANT INFORMATION Microdc Professional Power Module,Inc. This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C Tel:0086-20-86000646 E-mail:[email protected] for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Website:http://www.microdc.cn Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are Microdc Professional Power module,Inc.makes no representation that backward compatible with Sn/Pb soldering systems. the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or REACH COMPLIANT INFORMATION future patent rights. Specifications are subject to change without notice. This series has proven that this product does not contain harmful chemicals, it also has harmful chemical ©2010 substances through the registration, inspection and approval. Microdc Professional Power Module, Inc. Guangzhou http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 3 of 3