G Series Crystal 5mm X 7mm X 4 Pads Ceramic Package Wide Frequency Range Tight Tolerance and Stability Tape and Reel Packaging Frequency Range 6.000MHZ to 100.000MHZ Frequency Tolerance / Stability (See Part Number Guide for Options) Operating Temperature Range (See Part Number Guide for Options) Storage Temperature -40°C to +85°C Aging ±5ppm / first year Max Shunt Capacitance 7pF Max Load Capacitance 20pF Standard (See Part Number Guide for Options) Equivalent Series Resistance See ESR Chart Fundamental, or 3rd OT Mode of Operation Drive Level 100µW Typical Insulation Resistance 500 Megaohms Min at 100VDC Environmental & Mechanical Detail Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Marking Detail Line 1: MXX.XXX XX.XXX = Frequency in MHz Line 2: SYMCCL S = Internal Code YM = Numerical Date Code (Year/ Month) CC = Crystal Parameters Code L = Denotes RoHS Compliant MMD MONITOR/QUARTZEK – An ILSI Company, 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com Revision: Specifications are subject to change without notice. 07/10/13 J Pg 1 ESR Chart Frequency Range ESR (Ohms) Mode / Cut 6.000MHZ to 6.999MHZ 120 Max Fund / AT 7.000MHZ to 7.999MHZ 110 Max Fund / AT 8.000MHZ to 8.999MHZ 100 Max Fund / AT 9.000MHZ to 9.999MHZ 90 Max Fund / AT 10.000MHZ to 10.999MHZ 80 Max Fund / AT 11.000MHZ to 11.999MHZ 70 Max Fund / AT 12.000MHZ to 15.999MHZ 60 Max Fund / AT 16.000MHZ to 39.999MHZ 40 Max Fund / AT 40.000MHZ to 83.999MHZ 70 Max 3rd OT / AT 84.000MHZ to 100.000MHZ 60 Max 3rd OT / AT Part Number Guide G Frequency 5mm X 7mm x 1.3mm 4 Pads Load Capacitance S = Series 20 = 20pF (Standard) XX = XXpF (8pF to 50pF) Temperature Tolerance/Stability* A = ±50 ppm / ±100 ppm B = ±30 ppm / ±50 ppm C = ±15 ppm / ±30 ppm D = ±10 ppm / ±15 ppm E = ±50 ppm / ±50 ppm N = ±10 ppm / ±10 ppm Mode of Operation 1 = Fundamental 3 = 3rd Overtone Operating Temperature A = 0°C to +70°C B = -20°C to +70°C C = -40°C to +85°C ** Value Added Options Blank = No Added Options T = Tape and Reel * Please consult with MMD sales department for any other parameters or options. ** Not all Frequency Tolerance/Stability options available at this temperature range. Tape and Reel Mechanical Details PITCH TAPE WIDTH REEL DIA Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 PITCH TAPE WIDTH REEL DIA QTY PER REEL PIN 1 ORIENT. 8.00 [.315] 16.00 [.630] 180[7 IN] 1000 Q1 NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters. 3. Tolerances are ±0.10 [.004] mm unless otherwise specified. 4. Do not scale drawing. DIRECTION OF FEED MMD MONITOR/QUARTZEK – An ILSI Company, 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com Revision: Specifications are subject to change without notice. 07/10/13 J Pg 2