N Series Crystal Industry Standard Package RoHS Compliant Available Resistance Weld Frequency Range 3.200MHz to 91.730MHz Frequency Tolerance / Stability (See Part Number Guide for Options) Operating Temperature Range (See Part Number Guide for Options) Storage Temperature -55°C to +125°C Aging ±5ppm / first year max Shunt Capacitance 7pF Max Load Capacitance (See Part Number Guide for Options) Equivalent Series Resistance See ESR Chart Fundamental, or 3rd OT Mode of Operation Drive Level 1mW Max Environmental & Mechanical Detail Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Marking Detail Line 1: MXX.XXX XX.XXX = Frequency in MHz Line 2: SYMCCL S = Internal Code YM = Date Code (Year/Month) CC = Crystal Parameters Code L = Denotes RoHS Compliant MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Specifications are subject to change without notice. 09/13/10 H Pg 1 of 2 ESR Chart Frequency Range ESR (Ohms) Mode / Cut 3.200MHz to 4.999MHz 200 Max Fund / AT 5.000MHz to 5.999MHz 150 Max Fund / AT 6.000MHz to 7.999MHz 120 Max Fund / AT 8.000MHz to 8.999MHz 90 Max Fund / AT 9.000MHz to 9.999MHz 80 Max Fund / AT 10.000MHz to 16.999MHz 50 Max Fund / AT 17.000MHz to 24.999MHz 40 Max Fund / AT 25.000MHz to 40.000MHz 25 Max Fund / AT 24.000MHz to 34.999MHz 100 Max 3rd OT / AT 35.000MHz to 59.999MHz 80 Max 3rd OT / AT 60.000MHz to 91.730MHz 60 Max 3rd OT / AT Part Number Guide Frequency N1, N2, N3, or N4 See M echanical Details for pin connection and height Load Capacitance RoHS Com pliant Blank = Not Com pliant F = Is Com pliant S = Series 20 = 20pF (Standard) XX = XXpF (8pF to 50pF) A B C D E T Tem perature Tolerance/Stability = ±50 ppm / ±100 ppm = ±30 ppm / ±50 ppm = ±15 ppm / ±30 ppm = ±10 ppm / ±15 ppm = ±50 ppm / ±50 ppm = ±5 ppm / ±10 ppm O perating Tem perature A = 0°C to +70°c B = -20°C to +70°c C = -40°C to +85°c Packaging M ode of O peration 1 = Fundam ental 3 = 3rd Overtone Blank = Bulk T = Tape and Reel Mechanical Details MXX.XXX SYMCCL N1 AND N2 = 5.00 [.197] MAX N3 AND N4 = 4.00 [.157] MAX 12.50 [.492] MAX 4.85 [.191] MAX SQUARE CORNER DENOTES PIN 1 3.50 [.138] 1.19 [.047] 4 1 9.00 [.354] 9.00 [.354] 3 1.30 [.051] DIMENSION IN BRACKETS ARE IN INCHES 2.30 [.091] 2 2.20 [.087] SUGGESTED LAND PATTERN N1 AND N3 SERIES 4 3 1 2 N2 AND N4 SERIES 4 3 1 2 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Specifications are subject to change without notice. 09/13/10 H Pg 2 of 2