Molded Chip Wirewound Inductors NIN Series FEATURES • • • • • EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH SRF CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC TAPE PACKAGE FOR AUTOMATIC PICK-PLACE AVAILABLE TYPE AND RANGE Inductance Style Range 0805 D 2.0 x 1.25 x 1.25 NIN-ND Standard 10nH ~ 1.0μH NIN-FC 0.22 ~ 100μH Standard 1008 C 2.5 x 2.0 x 1.6 NIN-NC 10nH ~ 0.82μH High Frequency NIN-PC 1.0 ~ 33μH High Curret NIN-FA 0.22 ~ 220μH Standard 1210 A 3.2 x 2.5 x 2.2 NIN-NA 47nH ~ 8.2μH High Frequency NIN-PA High Current 1.0 ~ 330μH NIN-FB Standard 0.1 ~ 1000μH 1812 B 4.5 x 3.2 x 3.2 NIN-PB High Current 1.0 ~ 680μH Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details. EIA Size Size Code Size (L x W x H mm) NIC Type SPECIFICATIONS Specifications Inductance Range Inductance Tolerance Operating Temperature Range Insulation Resistance Withstanding Voltage Q Factor, Self Resonant Frequency, DC Resistance, Rated DC Current and Inductance Tolerance Case Size 1008 1210 1812 10nH ~ 100μH 47nH ~ 330μH 0.10μH ~ 1000μH ±20% (M), ±10% (K), ±5% (J) ±10% (K), ±5% (J) -25°C ~ +85°C (at 100% of rated voltage) 1,000 MegOhm Min. (@ 100Vdc, Termination to Case) 250Vdc for 1 minute (Termination to Case) 0805 10nH ~ 1.0μH ±10% (K), ±5% (J) See Individual Product Listings ENVIRONMENTAL CHARACTERISTICS Test Solderability Humidity Soldering Effect Low Frequency Vibration Thermal Shock Low Temperature Storage High Temperature Load Life Humidity Load Life Specification 90% Min. Coverage (1) No Evidence of Damage (2) Inductance Shall Be Within ±5% of Initial Value (3) Q Factor Shall Be Within ±10% of Initial Value (1) No Evidence of Damage (2) Inductance Shall Be Within ±10% of Initial Value (3) Q Factor Shall Be Within ±10% of Initial Value Test Method & Condition After 3 Sec. Dip in +230°C Solder Pot (Post Flux) After 500 Hrs at +60°C and 90~95% RH After 5 Sec. at +260°C (5 min. 120°C Pre-Heat) After 2 Hrs per Axis, 10 ~ 55Hz, 1.5mm Amplitude After 100 Cycles (-40°C ~ +85°C) 30 Min. Each After 500 Hrs at -40°C After 500 Hrs. at +85°C with Rated DC Current After 500 Hrs at +60°C with 90~95% RH at Rated DC Current ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com 1 Molded Chip Wirewound Inductors NIN Series DIMENSIONS (mm) SIZE B SIZE A, C and D MARKING A W A A W MARKING L H H L B EIA Size Size Code Dim. L B Dim. A Dim. B 0805 D 2.0 +0.3/-0.2 1.25 ± 0.3 1.25 ± 0.3 Dim. W Dim. H 1.0 ± 0.1 0.4 ± 0.2 1008 C 2.5 +0.3/-0.2 2.0 ± 0.2 1.6 ± 0.2 1.2 ± 0.1 0.4 ± 0.2 1210 1812 A B 3.2 ± 0.3 4.5 ± 0.3 2.5 ± 0.2 3.2 ± 0.2 2.2 ± 0.2 3.2 ± 0.2 1.9 ± 0.1 1.2 ± 0.2 0.6 ± 0.2 1.0 ± 0.2 PART MARKING Inductance Tolerance Marking for Tolerance Example ±20% M 2R2M ±10% ±5% No Identification J 470 270J (1) 3 digits system in μH (2) R indicates decimal point in μH Ex:2R7 = 2.7μH Ex:R18 = .18μH = 180nH (3) N indicates nanohenries (0.001 μH), Ex: 10N = 0.01 μH = 10nH Applicable Guidelines: 1. Recommended soldering conditions : Flow (wave): 250oC for 5 sec. max. (preheating of 120oC for 5 minutes.) Reflow: 250oC for 10 sec. max., total time above 230°C is 40 sec. max. (preheating 150°C ~ 180°C/120 sec. max.) 2. Avoid placing inductor over any metal pattern on the PCB, which may create mutual inductance problems. 3. For mounting, it is suggested to secure chip inductor by means of epoxy adhesive curable by ultraviolet. 4. Ultrasonic cleaning is not recommended. If it is necessary, the cleaning conditions must be examined so as not to create mechanical damage by unexpected resonant vibration. Please contact our engineering department. 5. An excessive mechanical force may effect the electrical and magnetic properties of chip inductors. Make sure not to use any stress greater than 2Kg when component is placed. PART NUMBER SYSTEM NIN-FA R47 M TR F Lead Free/RoHS compliant (99.3% Sn, 0.7% Cu) Packaging: TR = Tape & Reel Inductance Tolerance Code: M = ±20%, K = ±10%, J = ±5% Rated inductance in μH (3 digits, first 2 numbers are significant, R stands for decimal point) Series-Type ® 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Molded Chip Wirewound Inductors NIN-ND SERIES NIC P/N D SIZE (0805) 'L' Inductance (nH) STANDARD TYPE Tolerance (std) NIN Series (opt) 'Q' Factor (min.) L&Q Test Frequency SRF MHz (min.) NIN-ND10NKTRF 10 ±10% (K) 10 100 MHz 3300 NIN-ND12NKTRF 12 ±10% (K) 10 100 MHz 3300 NIN-ND15NKTRF 15 ±10% (K) 12 100 MHz 3000 NIN-ND18NKTRF 18 ±10% (K) 12 100 MHz 3000 NIN-ND22NKTRF 22 ±10% (K) 12 100 MHz 2600 NIN-ND27NKTRF 27 ±10% (K) 15 100 MHz 2500 NIN-ND33NxTRF 33 ±10% (K) ±5% (J) 15 100 MHz 2050 NIN-ND39NxTRF 39 ±10% (K) ±5% (J) 15 100 MHz 2000 NIN-ND47NxTRF 47 ±10% (K) ±5% (J) 15 100 MHz 1650 NIN-ND56NxTRF 56 ±10% (K) ±5% (J) 15 100 MHz 1550 NIN-ND68NxTRF 68 ±10% (K) ±5% (J) 15 100 MHz 1450 NIN-ND82NxTRF 82 ±10% (K) ±5% (J) 15 100 MHz 1100 NIN-NDR10xTRF 100 ±10% (K) ±5% (J) 8 25.2 MHz 800 NIN-NDR12xTRF 120 ±10% (K) ±5% (J) 8 25.2 MHz 600 NIN-NDR15xTRF 150 ±10% (K) ±5% (J) 10 25.2 MHz 600 NIN-NDR18xTRF 180 ±10% (K) ±5% (J) 10 25.2 MHz 600 NIN-NDR22xTRF 220 ±10% (K) ±5% (J) 10 25.2 MHz 500 NIN-NDR27xTRF 270 ±10% (K) ±5% (J) 10 25.2 MHz 300 NIN-NDR33xTRF 330 ±10% (K) ±5% (J) 10 25.2 MHz 200 NIN-NDR39xTRF 390 ±10% (K) ±5% (J) 10 25.2 MHz 150 NIN-NDR47xTRF 470 ±10% (K) ±5% (J) 10 25.2 MHz 150 NIN-NDR56xTRF 560 ±10% (K) ±5% (J) 10 25.2 MHz 100 NIN-NDR68xTRF 680 ±10% (K) ±5% (J) 10 25.2 MHz 100 NIN-NDR82xTRF 820 ±10% (K) ±5% (J) 10 25.2 MHz 80 NIN-ND1R0xTRF 1,000 ±10% (K) ±5% (J) 8 7.96 MHz 80 Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details. DC Rated Resistance DC Current (ohms) Max. (mA) Max. 0.18 0.24 0.24 0.29 0.29 0.34 0.39 0.41 0.46 0.51 0.57 0.63 0.86 0.99 1.47 1.61 1.84 1.95 2.16 2.37 2.56 2.69 3.02 3.38 3.88 540 535 520 480 465 455 395 390 385 360 340 330 285 275 230 195 170 165 160 150 145 140 130 125 120 ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com 3 Molded Chip Wirewound Inductors NIN Series For Quality Factor (Q) and Inductance (L) over Frequency curves see www.RFpassives.com NIN-FC SERIES NIC P/N C SIZE (1008) 'L' Inductance (μH) STANDARD TYPE Tolerance (std) (opt) 'Q' Factor (min.) L&Q Test Frequency SRF MHz (min.) NIN-FCR22xTRF 0.22 ±20% (M) ±10% (K) 25 25.2 MHz 230 NIN-FCR27xTRF 0.27 ±20% (M) ±10% (K) 25 25.2 MHz 210 NIN-FCR33xTRF 0.33 ±20% (M) ±10% (K) 25 25.2 MHz 190 NIN-FCR39xTRF 0.39 ±20% (M) ±10% (K) 25 25.2 MHz 175 NIN-FCR47xTRF 0.47 ±20% (M) ±10% (K) 25 25.2 MHz 160 NIN-FCR56xTRF 0.56 ±20% (M) ±10% (K) 25 25.2 MHz 150 NIN-FCR68xTRF 0.68 ±20% (M) ±10% (K) 25 25.2 MHz 135 NIN-FCR82xTRF 0.82 ±20% (M) ±10% (K) 25 25.2 MHz 125 NIN-FC1R0xTRF 1.0 ±10% (K) ±5% (J) 25 7.96 MHz 115 NIN-FC1R2xTRF 1.2 ±10% (K) ±5% (J) 25 7.96 MHz 100 NIN-FC1R5xTRF 1.5 ±10% (K) ±5% (J) 25 7.96 MHz 90 NIN-FC1R8xTRF 1.8 ±10% (K) ±5% (J) 25 7.96 MHz 85 NIN-FC2R2xTRF 2.2 ±10% (K) ±5% (J) 25 7.96 MHz 80 NIN-FC2R7xTRF 2.7 ±10% (K) ±5% (J) 25 7.96 MHz 75 NIN-FC3R3xTRF 3.3 ±10% (K) ±5% (J) 25 7.96 MHz 65 NIN-FC3R9xTRF 3.9 ±10% (K) ±5% (J) 25 7.96 MHz 60 NIN-FC4R7xTRF 4.7 ±10% (K) ±5% (J) 25 7.96 MHz 55 NIN-FC5R6xTRF 5.8 ±10% (K) ±5% (J) 25 7.96 MHz 50 NIN-FC6R8xTRF 6.8 ±10% (K) ±5% (J) 25 7.96 MHz 45 NIN-FC8R2xTRF 8.2 ±10% (K) ±5% (J) 25 7.96 MHz 40 NIN-FC100xTRF 10 ±10% (K) ±5% (J) 25 2.52 MHz 32 NIN-FC120xTRF 12 ±10% (K) ±5% (J) 25 2.52 MHz 30 NIN-FC150xTRF 15 ±10% (K) ±5% (J) 25 2.52 MHz 28 NIN-FC180xTRF 18 ±10% (K) ±5% (J) 25 2.52 MHz 25 NIN-FC220xTRF 22 ±10% (K) ±5% (J) 25 2.52 MHz 22 NIN-FC270xTRF 27 ±10% (K) ±5% (J) 25 2.52 MHz 21 NIN-FC330xTRF 33 ±10% (K) ±5% (J) 25 2.52 MHz 20 NIN-FC390xTRF 39 ±10% (K) ±5% (J) 25 2.52 MHz 18 NIN-FC470xTRF 47 ±10% (K) ±5% (J) 25 2.52 MHz 17 NIN-FC560xTRF 56 ±10% (K) ±5% (J) 25 2.52 MHz 16 NIN-FC680xTRF 68 ±10% (K) ±5% (J) 25 2.52 MHz 15 NIN-FC820xTRF 82 ±10% (K) ±5% (J) 25 2.52 MHz 13 NIN-FC101xTRF 100 ±10% (K) ±5% (J) 25 0.796 MHz 12 Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details. DC Rated Resistance DC Current (ohms) Max. (mA) Max. 0.70 0.75 0.85 0.95 1.00 1.10 1.25 1.40 0.65 0.75 0.85 0.95 1.05 1.20 1.30 1.40 1.55 1.75 1.95 2.20 3.50 3.80 4.40 5.00 5.80 6.30 7.10 9.50 11.0 12.1 16.6 19.0 21.0 190 180 170 160 155 150 140 130 195 180 170 160 155 145 135 130 125 120 115 105 80 75 70 65 60 115 110 90 80 75 70 65 60 ® 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Molded Chip Wirewound Inductors NIN Series For Quality Factor (Q) and Inductance (L) over Frequency curves see www.RFpassives.com NIN-NC SERIES C SIZE (1008) NIC P/N 'L' Inductance (nH) (std) NIN-NC10NKTRF NIN-NC12NKTRF NIN-NC15NKTRF NIN-NC18NKTRF NIN-NC22NKTRF NIN-NC27NKTRF NIN-NC33NxTRF NIN-NC39NxTRF NIN-NC47NxTRF NIN-NC56NxTRF NIN-NC68NxTRF NIN-NC82NxTRF NIN-NCR10xTRF NIN-NCR12xTRF NIN-NCR15xTRF NIN-NCR18xTRF NIN-NCR22xTRF NIN-NCR27xTRF NIN-NCR33xTRF NIN-NCR39xTRF NIN-NCR47xTRF NIN-NCR56xTRF NIN-NCR68xTRF NIN-NCR82xTRF 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) HIGH FREQUENCY TYPE Tolerance (opt) 'Q' Factor (min.) L&Q Test Frequency SRF MHz (min.) ------------±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) 10 10 10 10 15 15 15 15 15 15 15 15 10 10 10 10 10 10 10 10 10 10 10 10 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 25.2 MHz 25.2 MHz 25.2 MHz 25.2 MHz 25.2 MHz 25.2 MHz 25.2 MHz 25.2 MHz 25.2 MHz 25.2 MHz 25.2 MHz 25.2 MHz 2500 2200 1800 1550 1350 1150 1000 890 770 670 590 520 460 400 340 300 260 230 200 180 160 145 130 100 DC Rated Resistance DC Current (ohms) Max. (mA) Max. 0.32 0.34 0.38 0.40 0.43 0.47 0.51 0.55 0.59 0.63 0.68 0.73 0.80 0.87 0.98 1.05 1.15 1.25 1.37 1.47 1.58 1.70 1.85 2.10 280 270 255 250 240 230 220 215 205 200 190 185 175 170 160 155 145 140 135 130 125 120 110 100 Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details. ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com 5 Molded Chip Wirewound Inductors NIN Series For Quality Factor (Q) and Inductance (L) over Frequency curves see www.RFpassives.com NIN-PC SERIES NIC P/N C SIZE (1008) 'L' Inductance (nH) HIGH CURRENT TYPE Tolerance (std) (opt) 'Q' Factor (min.) L&Q Test Frequency SRF MHz (min.) NIN-PC1R0MTRF 1.0 ±20% (M) --10 7.96 MHz 95 NIN-PC1R5MTRF 1.5 ±20% (M) --10 7.96 MHz 85 NIN-PC2R2MTRF 2.2 ±20% (M) --10 7.96 MHz 65 NIN-PC3R3MTRF 3.3 ±20% (M) --8 7.96 MHz 55 NIN-PC4R7MTRF 4.7 ±20% (M) --8 7.96 MHz 43 NIN-PC6R8MTRF 6.8 ±20% (M) --8 7.96 MHz 39 NIN-PC100KTRF 10 ±10% (K) --20 2.52 MHz 32 NIN-PC120KTRF 12 ±10% (K) --20 2.52 MHz 25 NIN-PC150KTRF 15 ±10% (K) --20 2.52 MHz 21 NIN-PC220KTRF 22 ±10% (K) --20 2.52 MHz 18 NIN-PC330KTRF 33 ±10% (K) --20 2.52 MHz 16 Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details. DC Rated Resistance DC Current (ohms) Max. (mA) Max. 0.45 0.55 0.65 0.85 1.20 1.30 2.20 2.70 3.20 4.00 6.50 475 435 390 340 285 275 210 195 175 160 120 ® 6 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Molded Chip Wirewound Inductors NIN Series For Quality Factor (Q) and Inductance (L) over Frequency curves see www.RFpassives.com NIN-FA SERIES NIC P/N A SIZE (1210) 'L' Inductance (μH) STANDARD TYPE Tolerance (std) (opt) 'Q' Factor (min.) L&Q Test Frequency SRF MHz (min.) NIN-FAR22xTRF 0.22 ±20% (M) ±10% (K) 25 25.2 MHz 230 NIN-FAR27xTRF 0.27 ±20% (M) ±10% (K) 25 25.2 MHz 210 NIN-FAR33xTRF 0.33 ±20% (M) ±10% (K) 25 25.2 MHz 190 NIN-FAR39xTRF 0.39 ±20% (M) ±10% (K) 25 25.2 MHz 175 NIN-FAR47xTRF 0.47 ±20% (M) ±10% (K) 25 25.2 MHz 160 NIN-FAR56xTRF 0.56 ±20% (M) ±10% (K) 25 25.2 MHz 150 NIN-FAR68xTRF 0.68 ±20% (M) ±10% (K) 25 25.2 MHz 135 NIN-FAR82xTRF 0.82 ±20% (M) ±10% (K) 25 25.2 MHz 125 NIN-FA1R0xTRF 1.0 ±10% (K) ±5% (J) 30 7.96 MHz 115 NIN-FA1R2xTRF 1.2 ±10% (K) ±5% (J) 30 7.96 MHz 100 NIN-FA1R5xTRF 1.5 ±10% (K) ±5% (J) 30 7.96 MHz 90 NIN-FA1R8xTRF 1.8 ±10% (K) ±5% (J) 30 7.96 MHz 85 NIN-FA2R2xTRF 2.2 ±10% (K) ±5% (J) 30 7.96 MHz 80 NIN-FA2R7xTRF 2.7 ±10% (K) ±5% (J) 30 7.96 MHz 75 NIN-FA3R3xTRF 3.3 ±10% (K) ±5% (J) 30 7.96 MHz 65 NIN-FA3R9xTRF 3.9 ±10% (K) ±5% (J) 30 7.96 MHz 60 NIN-FA4R7xTRF 4.7 ±10% (K) ±5% (J) 30 7.96 MHz 55 NIN-FA5R6TRF 5.6 ±10% (K) ±5% (J) 30 7.96 MHz 50 NIN-FA6R8xTRF 6.8 ±10% (K) ±5% (J) 30 7.96 MHz 45 NIN-FA8R2xTRF 8.2 ±10% (K) ±5% (J) 30 7.96 MHz 40 NIN-FA100xTRF 10 ±10% (K) ±5% (J) 30 2.52 MHz 36 NIN-FA120xTRF 12 ±10% (K) ±5% (J) 30 2.52 MHz 33 NIN-FA150xTRF 15 ±10% (K) ±5% (J) 30 2.52 MHz 30 NIN-FA180xTRF 18 ±10% (K) ±5% (J) 30 2.52 MHz 27 NIN-FA220xTRF 22 ±10% (K) ±5% (J) 30 2.52 MHz 25 NIN-FA270xTRF 27 ±10% (K) ±5% (J) 30 2.52 MHz 22 NIN-FA330xTRF 33 ±10% (K) ±5% (J) 30 2.52 MHz 20 NIN-FA390xTRF 39 ±10% (K) ±5% (J) 30 2.52 MHz 20 NIN-FA470xTRF 47 ±10% (K) ±5% (J) 30 2.52 MHz 15 NIN-FA560xTRF 56 ±10% (K) ±5% (J) 30 2.52 MHz 15 NIN-FA680xTRF 68 ±10% (K) ±5% (J) 30 2.52 MHz 15 NIN-FA820xTRF 82 ±10% (K) ±5% (J) 30 2.52 MHz 11 NIN-FA101xTRF 100 ±10% (K) ±5% (J) 20 0.796 MHz 10 NIN-FA121xTRF 120 ±10% (K) ±5% (J) 20 0.796 MHz 10 NIN-FA151xTRF 150 ±10% (K) ±5% (J) 20 0.796 MHz 8 NIN-FA181xTRF 180 ±10% (K) ±5% (J) 20 0.796 MHz 7 NIN-FA221xTRF 220 ±10% (K) ±5% (J) 20 0.796 MHz 7 Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details. DC Rated Resistance DC Current (ohms) Max. (mA) Max. 0.29 0.32 0.35 0.39 0.44 0.49 0.55 0.61 0.69 0.75 0.75 0.82 0.95 1.10 1.20 1.30 1.50 1.60 1.80 2.00 2.10 2.50 2.80 3.30 3.70 5.00 5.60 6.40 7.00 8.00 9.00 10.0 10.0 11.0 15.0 17.0 21.0 360 345 330 305 290 275 260 245 230 215 210 200 190 180 180 175 165 160 150 140 140 125 120 110 105 90 85 80 75 70 65 60 60 55 50 50 45 ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com 7 Molded Chip Wirewound Inductors NIN Series For Quality Factor (Q) and Inductance (L) over Frequency curves see www.RFpassives.com NIN-NA SERIES NIC P/N A SIZE (1210) 'L' Inductance (μH) HIGH FREQUENCY Tolerance (std) (opt) 'Q' Factor (min.) L&Q Test Frequency SRF MHz (min.) NIN-NA47NMTRF 0.047 ±20% (M) --10 100 MHz 680 NIN-NA56NMTRF 0.056 ±20% (M) --10 100 MHz 600 NIN-NA68NMTRF 0.068 ±20% (M) --10 100 MHz 540 NIN-NA82NMTRF 0.082 ±20% (M) --10 100 MHz 500 NIN-NAR10MTRF 0.10 ±20% (M) --10 100 MHz 450 NIN-NAR12MTRF 0.12 ±20% (M) --10 25.2 MHz 400 NIN-NAR15MTRF 0.15 ±20% (M) --10 25.2 MHz 350 NIN-NAR18MTRF 0.18 ±20% (M) --10 25.2 MHz 320 NIN-NAR22KTRF 0.22 ±10% (K) --10 25.2 MHz 280 NIN-NAR27KTRF 0.27 ±10% (K) --10 25.2 MHz 250 NIN-NAR33KTRF 0.33 ±10% (K) --10 25.2 MHz 220 NIN-NAR39KTRF 0.39 ±10% (K) --10 25.2 MHz 200 NIN-NAR47KTRF 0.47 ±10% (K) --10 25.2 MHz 180 NIN-NAR56KTRF 0.56 ±10% (K) --10 25.2 MHz 160 NIN-NAR68KTRF 0.68 ±10% (K) --10 25.2 MHz 150 NIN-NAR82KTRF 0.82 ±10% (K) --10 25.2 MHz 135 NIN-NA1R0JTRF 1.0 ±5% (J) --13 7.96 MHz 120 NIN-NA1R2JTRF 1.2 ±5% (J) --13 7.96 MHz 110 NIN-NA1R5JTRF 1.5 ±5% (J) --13 7.96 MHz 95 NIN-NA1R8JTRF 1.8 ±5% (J) --13 7.96 MHz 85 NIN-NA2R2JTRF 2.2 ±5% (J) --13 7.96 MHz 80 NIN-NA2R7JTRF 2.7 ±5% (J) --13 7.96 MHz 70 NIN-NA3R3JTRF 3.3 ±5% (J) --13 7.96 MHz 62 NIN-NA3R9JTRF 3.9 ±5% (J) --13 7.96 MHz 57 NIN-NA4R7JTRF 4.7 ±5% (J) --13 7.96 MHz 52 NIN-NA5R6JTRF 5.6 ±5% (J) --13 7.96 MHz 46 NIN-NA6R8JTRF 6.8 ±5% (J) --13 7.96 MHz 42 NIN-NA8R2JTRF 8.2 ±5% (J) --13 7.96 MHz 38 Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details. DC Rated Resistance DC Current (ohms) Max. (mA) Max. 0.20 0.22 0.25 0.27 0.30 0.67 0.72 0.81 0.90 1.00 1.10 1.20 1.40 1.50 1.70 1.90 2.10 2.20 2.70 3.00 3.20 3.60 4.20 4.40 7.70 8.70 10.0 11.0 450 420 400 380 360 240 230 220 210 200 190 180 175 170 155 145 125 120 115 110 110 105 100 95 70 65 60 60 ® 8 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Molded Chip Wirewound Inductors NIN Series For Quality Factor (Q) and Inductance (L) over Frequency curves see www.RFpassives.com NIN-PA SERIES NIC P/N A SIZE (1210) 'L' Inductance (μH) HIGH CURRENT TYPE Tolerance (std) (opt) 'Q' Factor (min.) L&Q Test Frequency SRF MHz (min.) NIN-PA1R0MTRF 1.0 ±20% (M) --7 7.96 MHz 150 NIN-PA1R5MTRF 1.5 ±20% (M) --7 7.96 MHz 110 NIN-PA2R2MTRF 2.2 ±20% (M) --7 7.96 MHz 80 NIN-PA3R3MTRF 3.3 ±20% (M) --7 7.96 MHz 56 NIN-PA4R7MTRF 4.7 ±20% (M) --7 7.96 MHz 46 NIN-PA6R8MTRF 6.8 ±20% (M) --7 7.96 MHz 38 NIN-PA100KTRF 10 ±10% (K) --15 2.52 MHz 23 NIN-PA120KTRF 12 ±10% (K) --15 2.52 MHz 21 NIN-PA150KTRF 15 ±10% (K) --15 2.52 MHz 18 NIN-PA180KTRF 18 ±10% (K) --15 2.52 MHz 17 NIN-PA220KTRF 22 ±10% (K) --15 2.52 MHz 15 NIN-PA270KTRF 27 ±10% (K) --15 2.52 MHz 13 NIN-PA330KTRF 33 ±10% (K) --15 2.52 MHz 12 NIN-PA390KTRF 39 ±10% (K) --15 2.52 MHz 11 NIN-PA470KTRF 47 ±10% (K) --15 2.52 MHz 9.5 NIN-PA560KTRF 56 ±10% (K) --15 2.52 MHz 8.5 NIN-PA680KTRF 68 ±10% (K) --15 2.52 MHz 7.5 NIN-PA820KTRF 82 ±10% (K) --15 2.52 MHz 7.0 NIN-PA101KTRF 100 ±10% (K) --20 0.796 MHz 6.5 NIN-PA121KTRF 120 ±10% (K) --20 0.796 MHz 6.0 NIN-PA151KTRF 150 ±10% (K) --20 0.796 MHz 5.5 NIN-PA181KTRF 180 ±10% (K) --20 0.796 MHz 5.0 NIN-PA221KTRF 220 ±10% (K) --20 0.796 MHz 4.0 NIN-PA271KTRF 270 ±10% (K) --20 0.796 MHz 3.5 NIN-PA331KTRF 330 ±10% (K) --20 0.796 MHz 3.0 Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details. DC Rated Resistance DC Current (ohms) Max. (mA) Max. 0.15 0.18 0.23 0.28 0.34 0.42 0.50 0.60 0.74 0.90 1.15 1.45 1.65 1.90 2.25 3.30 3.70 4.20 5.00 7.00 8.00 9.50 11.0 14.5 16.0 600 550 500 400 350 300 240 230 220 205 185 165 155 145 135 110 105 100 90 75 70 65 60 55 50 ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com 9 Molded Chip Wirewound Inductor NIN Series For Quality Factor (Q) and Inductance (L) over Frequency curves see www.RFpassives.com NIN-FB SERIES NIC P/N B-SIZE (1812) 'L' Inductance (μH) STANDARD VALUES Tolerance (std) (opt) 'Q' Factor (min.) L&Q Test Frequency SRF MHz (min.) 35 300 NIN-FBR10xTRF 0.10 ±20% (M) ±10% (K) 25.2 MHz 35 280 NIN-FBR12xTRF 0.12 ±20% (M) ±10% (K) 25.2 MHz 35 250 NIN-FBR15xTRF 0.15 ±20% (M) ±10% (K) 25.2 MHz 35 220 NIN-FBR18xTRF 0.18 ±20% (M) ±10% (K) 25.2 MHz 40 200 NIN-FBR22xTRF 0.22 ±20% (M) ±10% (K) 25.2 MHz 40 180 NIN-FBR27xTRF 0.27 ±20% (M) ±10% (K) 25.2 MHz 40 165 NIN-FBR33xTRF 0.33 ±20% (M) ±10% (K) 25.2 MHz 40 150 NIN-FBR39xTRF 0.39 ±20% (M) ±10% (K) 25.2 MHz 40 145 NIN-FBR47xTRF 0.47 ±20% (M) ±10% (K) 25.2 MHz 40 140 NIN-FBR56xTRF 0.56 ±20% (M) ±10% (K) 25.2 MHz 40 135 NIN-FBR68xTRF 0.68 ±20% (M) ±10% (K) 25.2 MHz 40 130 NIN-FBR82xTRF 0.82 ±20% (M) ±10% (K) 25.2 MHz 100 NIN-FB1R0xTRF 1.0 ±20% (M) ±10% (K) 50 7.96 MHz 80 NIN-FB1R2xTRF 1.2 ±20% (M) ±10% (K) 50 7.96 MHz 70 NIN-FB1R5xTRF 1.5 ±20% (M) ±10% (K) 50 7.96 MHz 60 NIN-FB1R8xTRF 1.8 ±20% (M) ±10% (K) 50 7.96 MHz 55 NIN-FB2R2xTRF 2.2 ±20% (M) ±10% (K) 50 7.96 MHz 50 NIN-FB2R7xTRF 2.7 ±20% (M) ±10% (K) 50 7.96 MHz 45 NIN-FB3R3xTRF 3.3 ±20% (M) ±10% (K) 50 7.96 MHz 40 NIN-FB3R9xTRF 3.9 ±20% (M) ±10% (K) 50 7.96 MHz 35 NIN-FB4R7xTRF 4.7 ±20% (M) ±10% (K) 50 7.96 MHz 33 NIN-FB5R6xTRF 5.6 ±20% (M) ±10% (K) 50 7.96 MHz 27 NIN-FB6R8xTRF 6.8 ±20% (M) ±10% (K) 50 7.96 MHz 25 NIN-FB8R2xTRF 8.2 ±20% (M) ±10% (K) 50 7.96 MHz Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details. DC Rated Resistance DC Current (ohms) Max. (mA) Max. 0.18 0.20 0.22 0.24 0.25 0.26 0.28 0.30 0.32 0.36 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.90 1.00 1.10 1.20 1.40 800 770 730 700 665 635 605 575 545 520 500 475 450 430 410 390 380 370 355 330 315 300 285 270 ® 10 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Molded Chip Wirewound Inductors NIN Series For Quality Factor (Q) and Inductance (L) over Frequency curves see www.RFpassives.com NIN-FB SERIES NIC P/N B-SIZE (1812) 'L' Inductance (μH) STANDARD VALUES Tolerance (std) (opt) 'Q' Factor (min.) L&Q Test Frequency SRF MHz (min.) 2.52 MHz 20 NIN-FB100xTRF 10 ±10% (K) ±5% (J) 50 2.52 MHz 18 NIN-FB120xTRF 12 ±10% (K) ±5% (J) 50 2.52 MHz 17 NIN-FB150xTRF 15 ±10% (K) ±5% (J) 50 2.52 MHz 15 NIN-FB180xTRF 18 ±10% (K) ±5% (J) 50 2.52 MHz 13 NIN-FB220xTRF 22 ±10% (K) ±5% (J) 50 2.52 MHz 12 NIN-FB270xTRF 27 ±10% (K) ±5% (J) 50 2.52 MHz 11 NIN-FB330xTRF 33 ±10% (K) ±5% (J) 50 2.52 MHz 10 NIN-FB390xTRF 39 ±10% (K) ±5% (J) 50 2.52 MHz 10 NIN-FB470xTRF 47 ±10% (K) ±5% (J) 50 2.52 MHz 9.0 NIN-FB560xTRF 56 ±10% (K) ±5% (J) 50 2.52 MHz 9.0 NIN-FB680xTRF 68 ±10% (K) ±5% (J) 50 2.52 MHz 8.0 NIN-FB820xTRF 82 ±10% (K) ±5% (J) 50 0.796 MHz 8.0 NIN-FB101xTRF 100 ±10% (K) ±5% (J) 40 0.796 MHz 6.0 NIN-FB121xTRF 120 ±10% (K) ±5% (J) 40 0.796 MHz 5.0 NIN-FB151xTRF 150 ±10% (K) ±5% (J) 40 NIN-FB181xTRF 180 ±10% (K) ±5% (J) 40 0.796 MHz 5.0 0.796 MHz 4.0 NIN-FB221xTRF 220 ±10% (K) ±5% (J) 40 0.796 MHz 4.0 NIN-FB271xTRF 270 ±10% (K) ±5% (J) 40 0.796 MHz 3.5 NIN-FB331xTRF 330 ±10% (K) ±5% (J) 40 0.796 MHz 3.0 NIN-FB391xTRF 390 ±10% (K) ±5% (J) 40 0.796 MHz 3.0 NIN-FB471xTRF 470 ±10% (K) ±5% (J) 40 0.796 MHz 3.0 NIN-FB561xTRF 560 ±10% (K) ±5% (J) 30 0.796 MHz 3.0 NIN-FB681xTRF 680 ±10% (K) ±5% (J) 30 0.796 MHz 2.5 NIN-FB821xTRF 820 ±10% (K) ±5% (J) 30 0.796 MHz 2.5 NIN-FB102xTRF 1000 ±10% (K) ±5% (J) 30 Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details. DC Rated Resistance DC Current (ohms) Max. (mA) Max. 1.60 2.00 2.50 2.80 3.20 3.60 4.00 4.50 5.00 5.50 6.00 7.00 8.00 8.00 9.00 9.50 10.0 12.0 14.0 19.0 26.0 30.0 30.0 35.0 40.0 250 225 200 190 180 170 160 150 140 135 130 120 110 110 105 102 100 92 85 80 62 50 50 30 30 ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com 11 Molded Chip Wirewound Inductors NIN-PB SERIES NIN Series B-SIZE (1812) STANDARD VALUES L&Q Tolerance 'L' 'Q' SRF DC Rated NIC Test Inductance Factor MHz Resistance DC Current P/N Frequency (μH) (std) (min.) (min.) (ohms) Max. (mA) Max. (MHz) NIN-PB1R0KTRF 1 ±10% 10 7.96 200 0.11 1050 NIN-PB1R2KTRF 1.2 ±10% 10 7.96 160 0.12 1000 NIN-PB1R5KTRF 1.5 ±10% 10 7.96 130 0.15 950 NIN-PB1R8KTRF 1.8 ±10% 10 7.96 100 0.16 900 NIN-PB2R2KTRF 2.2 ±10% 10 7.96 80 0.18 850 NIN-PB2R7KTRF 2.7 ±10% 10 7.96 60 0.20 800 NIN-PB3R3KTRF 3.3 ±10% 10 7.96 45 0.22 750 NIN-PB3R9KTRF 3.9 ±10% 10 7.96 40 0.24 700 NIN-PB4R7KTRF 4.7 ±10% 10 7.96 35 0.27 650 NIN-PB5R6KTRF 5.6 ±10% 10 7.96 30 0.30 650 NIN-PB6R8KTRF 6.8 ±10% 10 7.96 28 0.35 600 NIN-PB8R2KTRF 8.2 ±10% 10 7.96 25 0.40 600 NIN-PB100KTRF 10 ±10% 10 2.52 22 0.50 550 NIN-PB120KTRF 12 ±10% 10 2.52 21 0.60 500 NIN-PB150KTRF 15 ±10% 10 2.52 20 0.70 450 NIN-PB180KTRF 18 ±10% 10 2.52 19 0.80 400 NIN-PB220KTRF 22 ±10% 10 2.52 18 0.90 370 NIN-PB270KTRF 27 ±10% 10 2.52 16 1.2 330 NIN-PB330KTRF 33 ±10% 10 2.52 14 1.4 300 NIN-PB390KTRF 39 ±10% 10 2.52 12 1.6 280 NIN-PB470KTRF 47 ±10% 10 2.52 11.5 1.9 260 NIN-PB560KTRF 56 ±10% 10 2.52 11 2.2 240 NIN-PB680KTRF 68 ±10% 10 2.52 10 2.6 220 NIN-PB820KTRF 82 ±10% 10 2.52 9.0 3.5 200 NIN-PB101KTRF 100 ±10% 20 0.796 8.0 4.0 180 NIN-PB121KTRF 120 ±10% 20 0.796 7.5 4.5 160 NIN-PB151KTRF 150 ±10% 20 0.796 7.0 6.5 140 NIN-PB181KTRF 180 ±10% 20 0.796 6.5 7.5 120 NIN-PB221KTRF 220 ±10% 20 0.796 5.5 9.0 120 NIN-PB271KTRF 270 ±10% 20 0.796 5.0 11 100 NIN-PB331KTRF 330 ±10% 20 0.796 4.0 13 90 NIN-PB391KTRF 390 ±10% 20 0.796 3.0 14 85 NIN-PB471KTRF 470 ±10% 20 0.796 3.0 16 75 NIN-PB561KTRF 560 ±10% 20 0.796 3.0 18 70 NIN-PB681KTRF 680 ±10% 20 0.796 2.5 22 65 Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details. ® 12 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Molded Chip Wirewound Inductors NIN Series CARRIER TAPE DIMENSIONS (mm) Case Code D C A B Type Size W±0.3 A±0.2 B±0.2 P±0.1 E±0.1 F±0.1 t1 t2 ND FC/NC/PC FA/NA/PA FB/PB 0805 1008 1210 1812 8.0 8.0 8.0 12.0 1.45 2.4 2.8 3.6 2.25 2.9 3.6 4.9 4.0 4.0 4.0 8.0 1.75 1.75 1.75 1.75 3.5 3.5 3.5 5.5 0.25 0.25 0.25 0.30 1.55 1.85 2.40 3.50 t1 B W F E Perforation1.5φ±0.1 A t2 P 4.0 ±0.1 2.0 ± 0.5 Size Dφ±2.0 W±1.5 Qty/Reel ND FC/NC/PC FA/NA/PA FB/PB 0805 1008 1210 1812 180 180 180 180 9.0 9.0 9.0 13.0 3000 pcs 2000 pcs 2000 pcs 500 pcs ± 21 0. 8 2.0 ± 0.5 Dφ Type 50φ Min. Case Code D C A B 13φ ±0.5 DIMENSIONS (mm) W RECOMMENDED LAND PATTERNS FOR FLOW AND REFLOW SOLDERING NIN Chip Land Pattern C A DIMENSIONS (mm) Case Code D C A B Type Size A B C ND FC/NC/PC FA/NA/PA FB 0805 1008 1210 1812 1.0~1.2 1.4~1.5 1.6~2.0 2.0~2.6 3.0~3.8 3.5~4.0 4.0~4.6 5.0~6.0 0.9~1.3 1.2~1.6 1.9~2.4 1.4~2.4 B ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com 13