LMR-400-LLPL TIMES MICROWAVE SYSTEMS LMR -400-LLPL Flexible Low Loss Plenum Coax ® Ideal for… •Indoor Plenum Feeder runs •UL/NEC/CSA rated CMP/FT6 •Any wireless application (e.g. LMDS, MMDS, WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Cellular, PCS, Paging) requiring an easily routed, low loss RF cable for in-building systems • LMR - LLPL is an indoor highly fire retarded cable intended specifically for runs within return air handling plenums (e.g. dropped ceilings, raised floors). It has a UL/NEC & CSA rating of ‘CMP’ and ‘FT6’ respectively. ® • Connectors: A variety of connectors are available for LMR-400-LLPL cable, including the most common interface types. Most employ crimp outer attachment using standard hex crimp sizes. • Flexibility and bendability are hallmarks of the LMR- • Cable Assemblies: All LMR-400-LLPL cable types 400-LLPL cable design. The flexible outer conductor are available as pre-terminated cable assemblies. Refer enables the tightest bend radius available for any cable of to the section on FlexTech for further details. similar size and performance. • Low Loss is another hallmark feature of LMR-400LLPL. Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line Part Description Stock cables. Part Number Application Jacket Color Code • RF Shielding is 50 dB greater than typical single LMR-400-LLPL Indoor/Outdoor Plenum FRPVC Orange 54070 shielded coax (40 dB). The multi-ply bonded foil outer CMP/FT6 conductor is rated conservatively at > 90 dB (i.e. >180 Construction Specifications dB between two adjacent cables). Description Material In. (mm) • Weatherability: LMR-400-LLPL cables are designed Inner Conductor Solid BCCAI 0.095 (2.41) for indoor Plenum applications. Black jacketed LMRDielectric Low density PTFE 0.285 (7.24) LLPL versions can be supplied for applications that Outer Conductor Aluminum Tape 0.291 (7.39) originate outdoors (e.g., rooftop) and subsequently enter Overall Braid Tinned Copper 0.320 (8.13) Jacket Orange FRPVC 0.405 (10.29) the building. 82 (800) TMS-COAX • www.timesmicrowave.com Mechanical Specifications Performance Property US Bend Radius: installation in. (mm) Bend Radius: repeated in. (mm) Bending Moment ft-lb (N-m) Weight lb/ft (kg/m) Tensile Strength lb (kg) Flat Plate Crush lb/in. (kg/mm) (metric) 1.00 4.0 0.5 0.114 120 185 (25.4) (101.6) (0.68) (0.17) (54.5) (3.31) Environmental Specifications Performance Property F Installation Temperature Range +23/+167 Storage Temperature Range +23/+167 Operating Temperature Range +23/+167 0 C -5/+75 -5/+75 -5/+75 o Electrical Specifications Performance Property Units US (metric) Velocity of Propagation % 76 Dielectric Constant NA 1.73 Time Delay nS/ft (nS/m) 1.34 (4.40) Impedance ohms 50 Capacitance pF/ft (pF/m) 26.7 (87.6) Inductance uH/ft (uH/m) 0.067 (0.22) Shielding Effectiveness dB >90 DC Resistance Inner Conductor ohms/1000ft (/km) 1.8 (5.9) Outer Conductor ohms/1000ft (/km) 1.65 (5.4) Voltage Withstand Volts DC 2500 Jacket Spark Volts RMS 8000 Peak Power kW 16 Attenuation vs. Frequency (typical) 10.0 Attenuation (db per 100 feet) Units 1.0 0.1 0 100 1,000 10,000 Frequency (MHz) Frequency (MHz) 30 50 150 220 450 900 1500 1800 2000 2500 3400 5800 Attenuation dB/100 ft 0.7 0.9 1.6 1.9 2.8 4.0 5.2 8.0 10.7 Attenuation dB/100 m 2.3 3.0 5.3 6.4 9.2 13.2 17.1 18.9 19.9 22.4 26.4 35.1 Avg. Power kW (0.129140) • 5.7 6.1 6.8 3.33 2.57 1.48 1.22 0.84 0.59 0.45 0.41 0.39 0.34 0.29 0.22 Calculate Attenuation = FMHz + (0.000150) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators) Attenuation: VSWR=1.0 ; Ambient = +25°C (77°F) Power: VSWR=1.0; Ambient = +40°C; Jacket = +75°C (167°F); Sea Level; dry air; atmospheric pressure; no solar loading (800) TMS-COAX • www.timesmicrowave.com 83 LMR-400-LLPL TIMES MICROWAVE SYSTEMS LMR-400-LLPL TIMES MICROWAVE SYSTEMS LMR -400-LLPL Flexible Low Loss Plenum Coax ® TC-400-NF-PL TC-400-NMH-PL EZ-400-NMH-PL-D TC-400-NMH-RA Connectors Inner Outer Finish* Part StockVSWR** Coupling Contact Contact BodyLengthWidthWeight Interface Description Number Code Freq.(GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g) N Female Straight Jack TC-400-NF-PL Crimp N/G 1.8 (45) 0.66 (16.8) 0.105 (47.6) N Male Straight Plug EZ-400-NMH-PL-D 3190-602 <1.25:1 (2.5) Hex/KnurlSpring Finger Crimp 3190-964 <1.25:1 (2.5) NA Solder A/G 1.5 (38) 0.89 (22.6) 0.113 (51.3) Straight Plug TC-400-NMH-PL 3190-759 <1.25:1 (2.5) Hex Solder Crimp S/G 1.5 (38) 0.89 (22.6) 0.113 (51.3) Right Angle 3190-422 <1.35:1 (6) Hex Solder Crimp S/G 1.8 (46) 1.25 (31.8) 0.130 (59.0) * Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair TC-400-NMH-RA HG-400T GK-S400TT Hardware Accessories Type Ground Kit Hoisting Grip 84 Part Number Stock Code GK-S400TT HG-400T GK-S400TT HG-400T Description Standard Grounding Kit (each) Laced Type (each) (800) TMS-COAX • www.timesmicrowave.com HX-4 CT-400/300 Y1719 CST-400 DBT-U CCT-01 TK-400EZ GST-400 RB-CST Install Tools Type Part Number Stock Code Crimp Tool HX-4 3190-200 Crimp Dies Y1719 3190-202 Crimp Tool CT-400/300 3190-666 Crimp Rings CR-400 3190-830 Strip Tool CST-400 3192-004 Mid-Span Strip Tool GST-400 3190-2174 Deburr Tool DBT-U 3192-001 Cutting Tool CCT-01 3190-1544 Replacement Blade RB-01 3190-1609 Replacement Kit RB-CST 3192-086 Tool Kit TK-400EZ 3190-1602 Description Crimp Handle .429" Hex Dies Crimp tool for LMR 400 connectors Crimp rings for TC/EZ-400 connectors (package of 10) Combination prep tool for LMR-400 crimp and clamp connectors For ground strap attachment Removes center conductor rough edges Cable end flush cut tool Replacement blade for cutting tool Replacement kit for all CST strip tools Tool kit for LMR-400 crimp/clamp connectors (includes CCT-01, CST-400, CT-400/300, Tool Pouch) (800) TMS-COAX • www.timesmicrowave.com 85 LMR-400-LLPL TIMES MICROWAVE SYSTEMS