75 Ohm SMC Plug Right Angle Connector Clamp/ Solder Attachment For RG180, RG195 TECHNICAL DATA SHEET PE4267 75 Ohm SMC Plug Right Angle Connector Clamp/Solder Attachment For RG180, RG195 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMC Plug RG180,RG195 Clamp/Solder Right Angle Electrical Specifications Impedance, Ohms 75 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 0.725 [18.42] 0.345 [8.76] 0.685 [17.4] Weight, lbs [g] 0.027 [12.25] Connector Type Contact Material and Plating Coupling Nut Material and Plating Hex Size, in. Torque, in-lbs [Nm] Body Material and Plating Dielectric Type SMC Plug Gold Brass, Nickel 11/32 5 [0.57] Brass, Nickel PTFE . Compliance Certifications (visit www.Pasternack.com for current document) Plotted and Other Data Notes: Values at 25 °C, sea level 75 Ohm SMC Plug Right Angle Connector Clamp/Solder Attachment For RG180, RG195 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm SMC Plug Right Angle Connector Clamp/Solder Attachment For RG180, RG195 PE4267 URL: http://www.pasternack.com/smc-plug-standard-rg180-rg195-connector-pe4267-p.aspx PE4267 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved PE4267 REV 01 3. INSERT PTFE (4) INTO CONNECTOR. PRESS DOWN CAP. 2. SLIDE BRAID CLAMP (3) OVER DIELECTRIC & UNDER BRAID. PUSH INTO WASHER UNTIL IT STOPS. STRIP CABLE AS SHOWN IN B. TRIM EXCESS BRAID FLUSH WITH SURFACE OF COMPRESSION WASHER (2). INSERT CABLE ASSEMBLY INTO BODY & TIGHTEN. SOLDER CENTER CONDUCTOR IN PLACE. 1. SLIDE CLAMP NUT (1) OVER CABLE AS SHOWN IN A. SLIDE COMPRESSION WASHER (2) OVER BRAID & SEAT AGAINST JACKET. FLAIR BRAID OVER COMPRESSION WASHER (2). ASSEMBLY PROCEDURES REV. - CAD FILE 042309 SCALE N/A SIZE A 2233 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4267 DWG TITLE 75 Ohm SMC Plug Right Angle Connector Clamp/Solder Attachment For RG180, RG195 PE4267 CAD Drawing 2