NSC DM7407N

DM5407/DM7407 Hex Buffers with
High Voltage Open-Collector Outputs
General Description
Pull-Up Resistor Equations
This device contains six independent gates each of which
performs a buffer function. The open-collector outputs require external pull-up resistors for proper logical operation.
RMAX e
VO (Min) b VOH
N1 (IOH) a N2 (IIH)
VO (Max) b VOL
RMIN e
IOL b N3 (IIL)
Where: N1 (IOH) e total maximum output high current for all
outputs tied to pull-up resistor
N2 (IIH) e total maximum input high current for all
inputs tied to pull-up resistor
N3 (IIL) e total maximum input low current for all
inputs tied to pull-up resistor
Connection Diagram
Dual-In-Line Package
TL/F/6497 – 1
Order Number DM5407J, DM5407W, DM7407M or DM7407N
See NS Package Number J14A, M14A, N14A or W14B
Function Table
YeA
Input
Output
A
Y
L
H
L
H
H e High Logic Level
L e Low Logic Level
C1995 National Semiconductor Corporation
TL/F/6497
RRD-B30M105/Printed in U. S. A.
DM5407/DM7407 Hex Buffers with High Voltage Open-Collector Outputs
June 1989
Absolute Maximum Ratings (Note)
Note: The ‘‘Absolute Maximum Ratings’’ are those values
beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The
parametric values defined in the ‘‘Electrical Characteristics’’
table are not guaranteed at the absolute maximum ratings.
The ‘‘Recommended Operating Conditions’’ table will define
the conditions for actual device operation.
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales
Office/Distributors for availability and specifications.
Supply Voltage
7V
Input Voltage
5.5V
Output Voltage
30V
Operating Free Air Temperature Range
b 55§ C to a 125§ C
DM54
DM74
0§ C to a 70§ C
b 65§ C to a 150§ C
Storage Temperature Range
Recommended Operating Conditions
Symbol
DM5407
Parameter
DM7407
Units
Min
Nom
Max
Min
Nom
Max
4.5
5
5.5
4.75
5
5.25
V
V
VCC
Supply Voltage
VIH
High Level Input Voltage
VIL
Low Level Input Voltage
0.8
0.8
VOH
High Level Output Voltage
30
30
V
IOL
Low Level Output Current
30
40
mA
TA
Free Air Operating Temperature
70
§C
2
2
b 55
125
V
0
Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted)
Symbol
Parameter
Conditions
Typ
(Note 1)
Min
Max
Units
VI
Input Clamp Voltage
VCC e Min, II e b12 mA
b 1.5
V
ICEX
High Level Output
Current
VCC e Min, VO e 30V
VIH e Min
250
mA
VOL
Low Level Output
Voltage
VCC e Min, IOL e Max
VIL e Max
0.7
IOL e 16 mA, VCC e Min
0.4
V
II
Input Current @ Max
Input Voltage
VCC e Max, VI e 5.5V
IIH
High Level Input Current
VCC e Max, VI e 2.4V
40
mA
IIL
Low Level Input Current
VCC e Max, VI e 0.4V
b 1.6
mA
ICCH
Supply Current with
Outputs High
VCC e Max
29
41
mA
ICCL
Supply Current with
Outputs Low
VCC e Max
21
30
mA
1
mA
Switching Characteristics at VCC e 5V and TA e 25§ C (See Section 1 for Test Waveforms and Output Load)
Parameter
Conditions
tPLH
Symbol
Propagation Delay Time
Low to High Level Output
CL e 15 pF
RL e 110X
tPHL
Propagation Delay Time
High to Low Level Output
Note 1: All typicals are at VCC e 5V, TA e 25§ C.
2
Min
Max
Units
10
ns
30
ns
Physical Dimensions inches (millimeters)
14-Lead Ceramic Dual-In-Line Package (J)
Order Number DM5407J
NS Package Number J14A
14-Lead Small Outline Molded Package (M)
Order Number DM7407M
NS Package Number M14A
3
DM5407/DM7407 Hex Buffers with High Voltage Open-Collector Outputs
Physical Dimensions inches (millimeters) (Continued)
14-Lead Molded Dual-In-Line Package (N)
Order Number DM7407N
NS Package Number N14A
14-Lead Ceramic Flat Package (W)
Order Number DM5407W
NS Package Number W14B
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and whose
failure to perform, when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
National Semiconductor
Corporation
1111 West Bardin Road
Arlington, TX 76017
Tel: 1(800) 272-9959
Fax: 1(800) 737-7018
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
National Semiconductor
Europe
Fax: (a49) 0-180-530 85 86
Email: cnjwge @ tevm2.nsc.com
Deutsch Tel: (a49) 0-180-530 85 85
English Tel: (a49) 0-180-532 78 32
Fran3ais Tel: (a49) 0-180-532 93 58
Italiano Tel: (a49) 0-180-534 16 80
National Semiconductor
Hong Kong Ltd.
13th Floor, Straight Block,
Ocean Centre, 5 Canton Rd.
Tsimshatsui, Kowloon
Hong Kong
Tel: (852) 2737-1600
Fax: (852) 2736-9960
National Semiconductor
Japan Ltd.
Tel: 81-043-299-2309
Fax: 81-043-299-2408
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.