WWW.PHIHONG.COM 45W DC-DC Power over Ethernet Splitter POE45 Gigabit IEEE802.3at Compliant Splitter Features IEEE802.3at Pre-standard Non-Vented Case Gigabit Compatible Designed to work with the POE60U and POE75U Single Port Injectors Applications WiMax Access Points Last Mile Wireless Proprietary Detection, Disconnect and Overload Protection Full Protection OCP, OVP Diagnostic LEDs 1 Year Warranty Computer Workstations Multi Radio Access Points Height: 36mm (1.42in) Weight: 200g (7.05oz) Safety Approvals CE Mechanical Characteristics Length: 140mm (5.51in) Width: 65mm (2.56in) Output Specifications Model DC Output Voltage POE45-120 12V Load 3.75A Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 11/17/2011 POE45 Characteristics INPUT: Input Voltage Range Operates with POE60U-560G or POE75U-1UP 47-57V DC WWW.PHIHONG.COM Immunity ESD: RS: EN61000-4-2 EN61000-4-3 Level 3 Level 2 Note: RS and CS tested with POE60U Input Current EMC 1.3A (RMS) maximum EN55022 Class A FCC Part 15, Class A OUPPUT: Regulation Dielectric Withstand (HI-POT) Test Line and Load ±2% Primary to secondary: 2121V DC for 1 minute, 10mA Ripple 120mV maximum at 25°C Efficiency 83% minimum at full load and 48V DC O/P Voltage Protection In case of output voltage overload, output will shutdown, and then auto restart Output can be shorted permanently without damage ENVIRONMENTAL Temperature Operation Non-operation 0 to +40°C -20 to +65°C Humidity Operation 5 to 90% Dimension Diagram Unit: mm [Type text] Indicators LED 1 – Output “ON” LED 2 – Power received via Data LED 3 – Power received via Spare Pair Insulation Resistance Primary to secondary: >10M Ohm 500V DC Warranty 1 Year Input and Output Data Connector RJ45 Output Connector Center Positive Barrel 12mm x 2.1mm x 5.5mm Tip is user changeable for other sizes