PHIHONG POE60D-560

WWW.PHIHONG.COM
60W Power over Ethernet Splitter
POE60 Ultra PoE Gigabit Splitter
Designed to work with
POE75U-1UP Single port
Features


Proprietary Detection, Disconnect and
Overload Protection per IEEE802.3af
Designed to Work with POE75U Single Port
Injector or better
Applications


WiMAX Access Point
Last Mile Wireless




Gigabit Compatible
Non-Vented Case
Diagnostic LEDs
1 Year Warranty


Computer Workstation
Multi Radio Access Points


Height: 27.9mm (1.09in)
Weight: 142g (5.0oz)
Safety Approvals

CE
Mechanical Characteristics


Length: 100mm (3.94in)
Width: 56mm (2.25in)
Output Specifications
Model
DC Output
Voltage
Output
Current
POE60D-560
50-57V
52V min when
used with
POE75U-1UP
1.1A
Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at
www.phihong.com for the most up-to-date specifications and contact information.
Revision 9/26/2012
POE60D Characteristics
INPUT:
Input Voltage Range
WWW.PHIHONG.COM
Immunity
Receives power from either data and spare pairs
50 to 57Vdc
ESD:
RS:
CS:
Input Current
EMC
1.4A (DC) max.
EN55022 Class A
FCC Part 15 Class A
OUTPUT:
Regulation
Isolation Test
The splitter output is non-isolated from incoming
PoE voltages
Unregulated
Power
60W for 55-57VDC input range
55W for 50VDC input range
98% (typical) at maximum load 53Vinput
Short Circuit Protection
Output can be shorted permanently without damage
ENVIRONMENTAL:
Temperature
0 to +40°C
-20 to +65°C
GREEN LED – Output Good
Designed to operate up to 100 meters per IEEE
802.3, CAT 5e or CAT6
Warranty
1 Year
Input and Output Data Connector
RJ45
Output Connector
Center Positive Barrel 9mm x 2.5mm ID x 5.5mm OD
Humidity
Operation
Indicators
Cable
Efficiency
Operation
Non-operation
EN61000-4-2. Level 3
EN61000-4-3. Level 2
EN61000-4-6. Level 2
5 to 90%
Dimension Diagram Unit: mm
Tip is user changeable for other sizes