PLETRONICS SM5520JX-75.0M-T500

SM55J Series 1.8 V
CMOS Clock Oscillators
March 2013
• Pletronics’ SM55J Series is a quartz crystal
controlled precision square wave generator with a
CMOS output.
• The package is designed for high density surface
m ount designs.
• This is a low cost m ass produced oscillator.
• Tape and Reel or cut tape packaging is available.
•
•
•
•
40 to 135 MHz
3.2 x 5 m m LCC Ceram ic Package
Enable/Disable Function
Disable function includes low standby power
m ode
• 3 rd Overtone Crystals used
• Low Jitter
PRELIMINARY
Pletronics Inc. certifies this device is in accordance with the
RoHS 6/6 (2011/65/EC) and WEEE (2002/96/EC) directives.
Pletronics Inc. guarantees the device does not contain the following:
Cadm ium , Hexavalent Chrom ium , Lead, Mercury, PBB’s, PBDE’s
W eight of the Device: 0.064 gram s
Moisture Sensitivity Level: 1 As defined in J-STD-020C
Second Level Interconnect code: e4
Absolute Maximum Ratings:
Parameter
Unit
V CC Supply Voltage
-0.3V to +4.0V
Vi
Input Voltage
-0.3V to V CC + 0.3V
Vo
Output Voltage
-0.3V to V CC + 0.3V
Io
Output Current
+20 m A to -20 m A
Thermal Characteristics
The m axim um die or junction tem perature is 125 oC
The therm al resistance junction to board is 30 to 50 oC/W att depending on the solder pads, ground plane
and construction of the PCB.
P roduct inform ation is current as of publication date. T he product conform s
Inc.
to specifications per the term s of the P letronics standard warranty. Production
processsing does not necessarily include testing of all param eters.
Copyright © 2010 Pletronics
SM55J Series 1.8 V
CMOS Clock Oscillators
March 2013
Part Number:
SM55
45
J
E
X
- 75.0M
-XX
Packaging code or blank
T250 = 250 per Tape and Reel
T500 = 500 per Tape and Reel
T1K = 1000 per Tape and Reel
Frequency in M Hz
Supply Voltage V CC
V = 1.8V _
+ 10%
Optional Enhanced OTR
Blank = Tem p. range -10 to +70 oC
C = Tem p. range -20 to +70 oC
E = Tem p. range -40 to +85 oC
Series M odel
Frequency Stability
45 = +
_ 50 ppm
44 = +
_ 25 ppm
20 = +
_ 20 ppm
Series M odel
Part Marking and Legend:
P ff.fff M
C YMDxx
P ff.fff M
C YYWWxx
PLE SM 55
ff.fff M
C YMDxx
5xYW W xx
ff.fff M
C PLExx
P5xYW W x
C ff.fff M
PLE
= Pletronics
FF.FFF M
= Frequency in MHz
YYW W or YW W or YMD = Date of Manufacture (year and week, or year-m onth-day)
All other m arking is internal factory codes
Specifications such as frequency stability, supply voltage and operating tem perature range, etc. are
not identified from the m arking. External packaging labels and packing list will correctly identify the
ordered Pletronics part num ber.
Codes for Date Code YM D
Code 10
Code A
1
2
3
4
B
C
D
E
F
G
H
J
K
L
M
Year 2010 2011 2012 2013 2014 Month JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
Code
Day
Code
Day
1
1
H
17
2
2
J
18
www.pletronics.com
3
3
K
19
4
4
L
20
5
5
M
21
6
6
N
22
425-776-1880
7
7
P
23
8
8
R
24
9
9
T
25
A
10
U
26
B
11
V
27
C
12
W
28
D
13
X
29
E
14
Y
30
F
15
Z
31
2
G
16
SM55J Series 1.8 V
CMOS Clock Oscillators
March 2013
Electrical Specification for 1.80V +
_ 10% over the specified temperature range
Item
Min
Max
Unit
40
135
MHz
“45"
-50
+50
ppm
“44"
-25
+25
“20"
-20
+20
Frequency Range
Frequency Accuracy
Output Waveform
Typ
Condition
For all supply voltages, load changes,
aging for 1 year, shock, vibration and
temperatures
CMOS
Output High Level
VCC-0.4
-
V
Output Low Level
-
0.4
V
Output Symmetry
45
55
%
at 50% point of VCC
80
dBc/Hz
at 25 oC, 125 MHz
105
dBc/Hz
130
dBc/Hz
145
dBc/Hz
155
dBc/Hz
158
dBc/Hz
160
dBc/Hz
Phase Noise
Enable/Disable Internal Pull-up
(See load circuit)
30
-
Kohm
V disable
-
30
%
V enable
70
-
%
-10
+10
uA
-10
+10
uA
Standby Current ICC
-
10
uA
Disable time
-
200
nS
Time for output to reach a high Z state
Start up time
-
10
mS
Time for output to reach specified
frequency
-10
+70
o
C
Standard Temperature Range
-20
+70
o
C
Extended Temperature Range
“C”
-40
+85
o
C
Extended Temperature Range
“E”
Storage Temperature Range
-55
+125
o
C
Output Load Capacitance (Cl)
-
15
Output leakage
VOUT = VCC
VOUT = 0V
Operating Temperature
Range
to VCC
of VCC applied to pad 1
Pad 1 low, device disabled
pF
A 0.01 nF or larger capacitor mounted proximal to the device between Vcc and Vss is required.
www.pletronics.com
425-776-1880
3
SM55J Series 1.8 V
CMOS Clock Oscillators
March 2013
Electrical Specification for 1.80V +
_10% over the specified temperature range
Item
Min
Typ
Max
Unit
Condition
Output TRISE and TFALL
-
1.5
2.5
nS
VCC Supply Current
(ICC)
-
2.5
5.0
mA
50 MHz
-
2.5
5.0
mA
65 MHz
-
3.5
7.0
mA
85 MHz
-
4.0
7.5
mA
100 MHz
-
4.5
8.5
mA
133 MHz
CLOAD = 15 pF
10% to 90% of VCC
See Load Circuit
no load
Specifications with Pad 1 E/D open circuit
www.pletronics.com
425-776-1880
4
SM55J Series 1.8 V
CMOS Clock Oscillators
March 2013
Load Circuit and Test Waveform
Reliability:
Environmental Com pliance
Parameter
Condition
Mechanical Shock
MIL-STD-883 Method 2002, Condition B
Vibration
MIL-STD-883 Method 2007, Condition A
Solderability
MIL-STD-883 Method 2003
Thermal Shock
MIL-STD-883 Method 1011, Condition A
ESD Rating
Model
Minimum Voltage
Conditions
Human Body Model
1500
MIL-STD-883 Method 3115
Charged Device Model
1000
JESD 22-C101
Package Labeling
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
Bar code is 39-Full ASCII
www.pletronics.com
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
425-776-1880
5
SM55J Series 1.8 V
CMOS Clock Oscillators
March 2013
Mechanical:
Inches
mm
A
0.197 _
+0.006
5.00 _
+0.15
B
0.126 _
+0.006
3.20 _
+0.15
C
0.045 _
+0.004
1.15 _
+0.10
1
0.048
1.23
E1
0.100
2.54
F1
0.004
0.10
G1
0.050
1.27
1
0.055
1.40
I1
0.024
0.60
J1
0.004
0.10R
K1
0.008
0.020R
D
H
Not to Scale
1
Typical dimensions
Contacts :
Gold 11.8 to 39.4 µinches (0.3 to 1.0 µm) over Nickel 50 to 350 µinches (1.27 to 8.89 µm)
Pad
Function
Note
1
Output
Enable/Disable
When this pad is not connected the oscillator shall operate.
When this pad is logic low the output will be inhibited (high impedance state.)
Recommend connecting this pad to VCC if the oscillator is to be always on.
2
Ground (GND)
3
Output
4
Supply Voltage
(VCC)
Recommend connecting appropriate power supply bypass capacitors as close as
possible.
Layout and application information
For Optim um Jitter Perform ance, Pletronics recom m ends:
•
a ground plane under the device
•
no large transient signals (both current and voltage) should be routed under the device
•
do not layout near a large m agnetic field such as a high frequency switching power supply
•
do not place near piezoelectric buzzers or m echanical fans.
www.pletronics.com
425-776-1880
6
SM55J Series 1.8 V
CMOS Clock Oscillators
March 2013
Reflow Cycle (typical for lead free processing)
The part m ay be reflowed 3 tim es without degradation.
Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250
Constant Dimensions Table 1
Tape
Size
D0
8mm
D1
Min
E1
P0
1.0
12mm
1.5
16mm
+0.1
-0.0
24mm
P2
S1
Min
T
Max
0.6
0.6
T1
Max
2.0
+0.05
_
1.5
1.75
4.0
1.5
_
+0.1
_0.1
+
0.1
2.0
_
+0.1
1.5
Variable Dimensions Table 2
Tape
Size
B1
Max
E2 Min
F
P1
T2
Max
W
Max
Ao, Bo &
Ko
16 mm
12.1
14.25
7.5 _
+0.1
8.0 _
+0.1
8.0
16.3
Note 1
Note 1: Embossed cavity to conform to EIA-481-B
Dimensions in mm
Not to scale
REEL DIMENSIONS
A
B
inches
7.0
10.0
13.0
mm
177.8
254.0
330.2
inches
2.50
4.00
3.75
mm
63.5
101.6
95.3
Tape
Width
16.4
+2.0
-0.0
16.0
C
mm
D
mm
13.0 +0.5 / -0.2
16.4
+2.0
-0.0
16.4
+2.0
-0.0
Reel dimensions may vary from the above
www.pletronics.com
425-776-1880
7
SM55J Series 1.8 V
CMOS Clock Oscillators
March 2013
IM PORTANT NOTICE
Pletronics Incorporated (PLE) reserves the right to m ake corrections, im provem ents, m odifications and
other changes to this product at anytim e. PLE reserves the right to discontinue any product or service
without notice. Custom ers are responsible for obtaining the latest relevant inform ation before placing
orders and should verify that such inform ation is current and com plete. All products are sold subject to
PLE’s term s and conditions of sale supplied at the tim e of order acknowledgm ent.
PLE warrants perform ance of this product to the specifications applicable at the tim e of sale in accordance
with PLE’s lim ited warranty. Testing and other quality control techniques are used to the extent PLE
deem s necessary to support this warranty. Except where m andated by specific contractual docum ents,
testing of all param eters of each product is not necessarily perform ed.
PLE assum es no liability for application assistance or custom er product design. Custom ers are
responsible for their products and applications using PLE com ponents. To m inim ize the risks associated
with the custom er products and applications, custom ers should provide adequate design and operating
safeguards.
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, devices or system s or other critical applications that m ay involve potential risks of death,
personal injury or severe property or environm ental dam age. Inclusion of PLE products in such
applications is understood to be fully at the risk of the custom er. Use of PLE products in such applications
requires the written approval of an appropriate PLE officer. Questions concerning potential risk
applications should be directed to PLE.
PLE does not warrant or represent that any license, either express or im plied, is granted under any PLE
patent right, copyright, artwork or other intellectual property right relating to any com bination, m achine or
process which PLE product or services are used. Inform ation published by PLE regarding third-party
products or services does not constitute a license from PLE to use such products or services or a
warranty or endorsem ent thereof. Use of such inform ation m ay require a license from a third party under
the patents or other intellectual property of the third party, or a license from PLE under the patents or other
intellectual property of PLE.
Reproduction of inform ation in PLE data sheets or web site is perm issible only if the reproduction is
without alteration and is accom panied by associated warranties, conditions, lim itations and notices.
Reproduction of this inform ation with alteration is an unfair and deceptive business practice. PLE is not
responsible or liable for such altered docum ents.
Resale of PLE products or services with statem ents different from or beyond the param eters stated by
PLE for that product or service voids all express and im plied warranties for the associated PLE product or
service and is an unfair or deceptive business practice. PLE is not responsible for any such statem ents.
Contacting Pletronics Inc.
Pletronics Inc.
Tel: 425-776-1880
19013 36 th Ave. W est
Fax: 425-776-2760
Lynnwood, W A 98036-5761 USA
E-m ail: ple-sales@ pletronics.com
URL: www.pletronics.com
Copyright © 2010, Pletronics Inc.
www.pletronics.com
425-776-1880
8