5 4 MATERIAL AND FINISH: Insulator: Polycarbonate, UL-94V-0 rated Contacts: Brass, Nickel plated ELECTRICAL SPECIFICATIONS: V Current rating: 16 A D E Voltage rating: 250 VAC Current rating: 20 A Voltage rating: 250 VAC Insulation resistance: 100 Mohm min. at 500 VDC Dielectric withstanding voltage: 2000 VAC for one minute 33.0+0.2 R4.5+0.2 TYP. 28.0±0.2 RECOMMENDED PANEL CUTOUT 3X 2.8±0.1 24.4 0.80 3X 3.0x1.7 C 9.3±0.5 REPLACE WITH CORRESPONDING PANEL THICKNESS 21 A+0.2 X.X 1) COLOR 1 = BLACK 2 = GRAY 3.0 6.0±0.1 2) ELECTRICAL CIRCUIT CONFIGURATION B 5.0±0.1 4 = 20A 250V 70°C 2 POLE PB TERM. DIM. 71/7/09 C PB PB 7/2/07 B ADD 1.0 PANEL & RoHS 10/8/04 A ADD SOLDER TEMP & TIME TD PB P/N A MAX. PANEL THICKNESS 42R08-3X2X-100 1.0 1.0 42R08-3X2X-150 1.5 1.5 42R08-3X2X-200 2.0 2.0 2.5 42R08-3X2X-250 2.5 ADDITIONAL PANEL THICKNESS AVAILABLE ON REQUEST 3X 2.00±0.05 13.0±0.2 DATE CHANGE B 21.0+0.5 8.0±0.2 2 = 20A 250V 155°C 2+GROUND REV REVISIONS CHNG CHCK APPR 1 = 20A 250V 70°C 2+GROUND A 3) PANEL THICKNESS 29.0+0.5 TOLERANCE UNLESS OTHERWISE SPECIFIED X ± 1 X.X ± 0.4 X.XX ± 0.20 DRAWN BY CHECK BY APPR BY 6 D 25.0+0.2 E MECHANICAL SPECIFICATIONS: Recommended Soldering Temp: 235°C Recommended Soldering Time: 5 sec. max. ORDERING CODE: 42R08-3 __ 2 __ - __ __ __ 1 2 3 1 32.4 L C 2 36.0±0.2 42R08 D 3 N 6 5 4 GQ DATE: 08/24/01 TD DATE: 08/29/01 PB DATE: 08/29/01 3 Phone: 973 560-0019 Whippany, New Jersey Fax: 973 560-0076 A PART: 16/20A IEC 60320 APPL. INLET; SOLDER TERMINALS; SNAP-IN, PANEL MOUNT PART #: SIZE: SCALE: SHEET 1 of 1 42R08-3X2X-XXX A NTS 2 ALL DIMENSIONS FOR REFERENCE ONLY DIMENSIONS ARE IN MILLIMETERS 1 REV: C