05381 PLR0524P Only One Name Means ProTek’Tion™ ultra low capacitance steering diode/tvs array Description The PLR0524P is an ultra low capacitance steering diode/TVS array. This device is designed to protect computing applications such as gigabit Ethernet, HDMI, USB and DVI interfaces as well as telecommunication equipment and systems. The PLR0524P is available in the space-saving DFN-10 package configuration and is rated at 60 Watts peak pulse power per line for a 8/20µs waveshape. This device meets the IEC 61000-4-2 (ESD), 61000-4-2 (EFT) and 61000-4-4 (Surge) requirements. At higher operating frequencies or faster edge rates, insertion loss and signal integrity are a major concern. This device in conjunction with passive components integrated into a TVS/filter network can be used for EMI/RFI protection. DFN-10 package Features applications • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Lightning): 4A - 8/20µs • ESD Protection > 25 kilovolts • 60 Watts Peak Pulse Power per Line (tp=8/20µs) • Low Leakage Current < 0.5µA • Protects 4 Lines • Ultra Low Capacitance : 0.4pF Typical(I/O to I/O) • RoHS Compliant • REACH Compliant • Gigabit Ethernet • DVI, USB and HDMI Interfaces • High-Speed Data Line ESD Protection • FireWire, SATA & PCIe Interfaces • IEEE 1394 to 3.2Gbps Mechanical characteristics • Molded JEDEC DFN-10 Package • Approximate Weight: 7 milligrams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 8mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 circuit diagram & pin configuration Pin 1 Pin 2 Pin 4 I/O GND I/O I/O 1 2 3 4 5 Pin 5 Pin 3, 8 05381.R0 8/12 I/O Page 1 10 9 8 7 6 NC NC GND NC NC www.protekdevices.com 05381 PLR0524P Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS TL -55 to 150 °C Storage Temperature TSTG -55 to 150 °C Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 60 Watts Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER device marking PLR0524P 524 RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (Fig. 2) (note 1) @ IP = 4A VC VOLTS MAXIMUM LEAKAGE CURRENT typical CAPACITANCE (note 1) @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (Fig. 2) (note 1) @ IP = 1A VC VOLTS VWM VOLTS @V WM ID µA @0V, 1MHz C pF 5.0 6.0 12.5 16.5 0.5 0.8 notes 1. I/O to Ground. figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - Watts 1,000 100 10 1 0.1 05381.R0 8/12 60W, 8/20µs Waveform 1 10 100 td - Pulse Duration - µs Page 2 1,000 10,000 www.protekdevices.com 05381 PLR0524P Only One Name Means ProTek’Tion™ typical device characteristics figure 2 pulse wave form tf 100 Peak Value IPP 80 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs e-t 60 40 td = t/(IPP/2) 60 40 20 20 0 Peak Pulse Power 8/20µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP 120 figure 3 power derating curve 0 5 10 15 t - Time - µs 20 25 0 30 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 figure 4 insertion loss 10 db per Division 20 Ref 0 -20 0 05381.R0 8/12 3 Frequency - GHz Page 3 6 www.protekdevices.com 05381 PLR0524P Only One Name Means ProTek’Tion™ DFN-10S1 package information D outline dimensions dim millimeters inches min max min max A 0.56 0.65 0.22 0.026 A1 0.00 0.05 0.000 0.002 A2 0.13 0.203 0.005 0.008 b 0.15 0.25 0.006 0.010 b1 0.35 0.45 0.014 0.018 D 2.40 2.60 0.094 0.102 E 0.90 1.10 0.035 0.043 e L 0.50 Nominal 0.36 0.46 TOP VIEW A2 E SIDE VIEW A 0.020 Nominal 0.014 A1 0.018 L NOTEs b1 1. Controlling dimension: millimeters. 1 2 R0.125mm BOTTOM VIEW e pad layout millimeters inches NOMINAL NOMINAL C 0.675 0.34 G 0.20 0.008 P 0.50 0.020 P1 1.00 0.039 X 0.20 0.008 X1 0.40 0.016 Y 0.675 0.027 Y1 1.55 0.061 dim b 2xR0.75mm(7x) P P1 Y C G Y1 X X1 NOTEs 1. Controlling dimension: millimeters. 05381.R0 8/12 Page 4 www.protekdevices.com 05381 PLR0524P Only One Name Means ProTek’Tion™ TAPE AND REEL D t Top Cover Tape P2 10 Pitches Cumulative Tolerance on tape ± 0.2 E P0 A0 F K0 W B0 Pin 1 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 1.20 ± 0.10 2.70 ± 0.10 0.75 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 tmax 0.25 Notes 1. 2. 3. 4. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and pin 1 dot. Package outline, pad layout and tape specifications per document number 06083.R0. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty PLR0524P n/a -T7 3,000 7” n/a This device is only available in a Lead-Free configuration. 05381.R0 8/12 Page 5 www.protekdevices.com 05381 PLR0524P Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2012 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05381.R0 8/12 Page 6 www.protekdevices.com