05138 SMF05C - SMF24C Only One Name Means ProTek’Tion™ MULTI-LINE TVS ARRAY Description The SMFxxC series are subminiature TVS suppressor arrays designed for the protection of sensitive IC components from the damaging effects of Electrostatic Discharge (ESD) and Electrial Fast Transients (EFT). This series is ideally suited for use in portable electronics such as SMART phones, laptops, as well as cellular phone base stations. The SMFxxC series provides protection in accordance with IEC 61000-4-2 and IEC 61000-4-4 requirements. This series is available in a SC70-6L package configuration and is rated at 100 Watts peak pulse power (8/20µs) per line. SC70-6L package Features applications • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV • Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns • 100 Watts Peak Pulse Power per Line(tp = 8/20µs) • Monolithic Design • Protects 4 Bidirectional Lines or 5 Unidirectional Lines • ESD Protection > 25 kilovolts • Available in Multiple Voltages • Low Clamping Voltage • RoHS Compliant • REACH Compliant • Notebook Computers • Cellular Phone Base Stations • SMART Phones • Digital Cameras mechanical characteristics • Molded JEDEC SC70-6L Package • Approximate Weight: 7milligrams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • Flammability Rating UL 94V-0 • 8mm Tape and Reel per EIA Standard 481 PIN CONFIGURATION 05138.R11 10/12 1 6 2 5 3 4 Page 1 www.protekdevices.com 05138 SMF05C - SMF24C Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature SYMBOL VALUE UNITS PPP 100 Watts TL -55 to 150 °C TSTG -55 to 150 °C ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER device marking RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM LEAKAGE CURRENT maximum CAPACITANCE (Note 1) @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (Fig. 2) @ I P = 5A VC VOLTS VWM VOLTS @V WM ID µA @0V, 1MHz Cj pF SMF05C 05C 5.0 6.0 9.8 5 60 SMF12C 12C 12.0 13.3 18.0 1 30 SMF15C 15C 15.0 16.7 22.0 1 25 SMF24C 24C 24.0 26.7 50.0 1 20 NOTES 1. Pins 1, 3, 4, 5 or 6 to pin 2. figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - Watts 10,000 1,000 100W, 8/20µs Waveform 100 10 0.1 05138.R11 10/12 1 10 100 td - Pulse Duration - µs Page 2 1,000 10,000 www.protekdevices.com 05138 SMF05C - SMF24C Only One Name Means ProTek’Tion™ typical device characteristics figure 2 pulse wave form tf 100 Peak Value IPP 80 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs e-t 60 40 td = t/(IPP/2) 60 40 20 20 0 Peak Pulse Power 8/20µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP 120 figure 3 power derating curve 0 5 10 15 t - Time - µs 20 25 0 30 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 figure 4 typical clamping voltage vs peak pulse currenT SMF05C VC - Clamping Voltage - Volts 13 9 5 1 0 05138.R11 10/12 2 4 6 IPP - Peak Pulse Current - Amps Page 3 8 10 www.protekdevices.com 05138 SMF05C - SMF24C Only One Name Means ProTek’Tion™ application information Line 1 Line 2 2 1 4 5 6 I/O Port 3 Line 3 Line 4 figure 1 - common-mode i/o port protection (unidirectional) Circuit connectivity is as follows: • Line 1 connected to pin 1. • Line 2 connected to pin 3. • Line 3 connected to pin 4. • Line 4 connected to pin 6. • Pin 2 connected to ground. • Pin 5 not connected. Line 1 Line 2 2 1 4 5 6 I/O Port 3 Line 3 Line 4 Line 5 figure 2 - common-mode i/o port protection (bidirectional) Circuit connectivity is as follows: • Line 1 connected to pin 1. • Line 2 connected to pin 3. • Line 3 connected to pin 4. • Line 4 connected to pin 5. • Line 5 connected to pin 6. • Pin 2 not connected. circuit board recommendations Circuit board layout is critical for electromagnetic compatibility protection. The following guidelines are recommended: • The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. • The path length between the TVS device and the protected line should be minimized. • All conductive loops including power and ground loops should be minimized. • The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. • Ground planes should be used whenever possible. For multilayer PCBs, use ground vias. 05138.R11 10/12 Page 4 www.protekdevices.com 05138 SMF05C - SMF24C Only One Name Means ProTek’Tion™ SC70-6L package information D outline dimensions dim millimeters min max min max A 1.90 2.15 0.074 0.084 B 1.15 1.35 0.045 0.055 C 0.80 1.00 0.031 0.040 D 0.15 0.30 0.005 0.012 E 0.65 BSC F E inches 6 4 5 1 3 2 L 0.026 BSC 1.30 BSC 0.80 1.10 0.031 0.043 J 0.08 0.25 0.003 0.010 K 2.00 2.40 0.078 0.095 L - 0.10 - 0.004 M 0.26 0.46 0.010 0.018 J B F 0.051 BSC G 0° - 8° K M A C G NOTES 1. Controlling dimension: inches. 2. Dimensioning and tolerances per ANSI Y14.5M, 1985. 3. Dimensions are exclusive of mold flash and metal burrs. pad layout dimensions millimeters inches NOMINAL NOMINAL A 0.50 0.020 B 1.30 0.051 C 0.65 0.026 D 1.72 0.068 E 0.60 0.024 dim B C E D A NOTES 1. Controlling dimension: inches. 05138.R11 10/12 Page 5 www.protekdevices.com 05138 SMF05C - SMF24C Only One Name Means ProTek’Tion™ TAPE AND REEL P0 10 Pitches Cumulative Tolerance on Tape. ± 0.2 P2 D t E Top Cover Tape A0 F W K0 B0 Pin 1 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 2.25 ± 0.10 2.34 ± 0.10 1.22 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 tmax 0.25 Notes 1. 2. 3. 4. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T73 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and pin one defined by dot on package. Package outline, pad layout and tape specifications per document number 06019.R6 3/11. ORDERING INFORMATION base PART NUMBER (xx = Voltage) LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty SMFxxC -LF -T73 3,000 7” n/a This device is only available in a Lead-Free configuration. 05138.R11 10/12 Page 6 www.protekdevices.com 05138 SMF05C - SMF24C Only One Name Means ProTek’Tion™ company information COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products. These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2001 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05138.R11 10/12 Page 7 www.protekdevices.com