HEAT SHRINK THIN WALL TUBING Q-175K 175°C , CLEAR, SEMI-RIGID, HIGH TEMPERATURE, CHEMICAL RESISTANT PVDF TUBING SHRINK RATIO 2:1 Features/Applications applications requiring high temperature performance, outstanding abrasion and cut-through resistance or superior chemical and solvent resistant properties. It reliably protects wires, solder joints, terminals, connectors and components from Operating temperature: -55°C to +175°C Full recovery temperature: 175°C Approval: UL VW-1, File No. E245010 Meets: SAE-AMS-DTL-23053/18 Standard color: Clear RoHS Compliant Technical Data Property Test Method Typical Data IEC 216 -55°C to +175°C Tensile Strength ASTM D 2671 > 34.5 MPa Ultimate Elongation ASTM D 2671 > 150% Operating Temperature Ultimate Elongation After Aging Heat Shock Cold Bend 250°C, 168 hrs. > 100% 300°C,1 hr. No cracking -55°C, 1 hr. No cracking Dielectric Strength ASTM D 2671 > 30 kV / mm Volume Resistance IEC 93 Flammability VW-1 > 10 13 Ω.cm Pass Product Dimensions As Supplied (mm) Size After Recovered (mm) Standard Packaging Cut to Length Pcs. *(QB) Qty per bag Inch mm Inside Diameter (min.) Inside Diameter (max.) Wall Thickness (min.) Standard Spool *(SS) (Meter) 6” 48” 3/64 1.2 1.2 0.6 0.20 200 32 25 1/16 1.6 1.6 0.8 0.20 200 28 25 3/32 2.4 2.4 1.2 0.23 200 24 25 1/8 3.2 3.2 1.6 0.23 200 20 25 3/16 4.8 4.8 2.4 0.23 100 16 25 1/4 6.4 6.4 3.2 0.28 100 12 25 3/8 9.5 9.5 4.8 0.28 - 8 25 1/2 12.7 12.7 6.4 0.28 - 4 5 3/4 19.1 19.1 9.5 0.36 - 2 5 1 25.4 25.4 12.7 0.41 - 1 5 1 1/2 38.1 38.1 19.0 0.51 - 1 5 Notes: 1. * See page 13 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. www.Qualtekusa.com