QUALTEK QPD-25-5

Qualtek
25Watts Single Output
P
P C
Electronics Corporation
QPD-25 Series
Features:
Universal AC input/ Full range
No Load Power Consumption <0.5W
Wide Operating Ambient Temperature (-20°C~70°C)
High Efficiency, and High Reliability
Output Protections: OLP/OVP/SCP
All using 105°C long life electrolytic capacitors.
100% full load burn-in test
Conformal Coating
CB
Model
QPD-25-3.3
QPD-25-5
QPD-25-12
QPD-25-15
QPD-25-24
Output Characteristics
DC Output
3.3V
5V
12V
15V
24V
Rated Current
5A
5A
2.1A
1.6A
1.1A
Current Range
0~5A
0~5A
0~2.1A
0~1.6A
0~1.1A
Ripple and Noise (-20°C~70°C) <50mV
<50mV
<120mV
<120mV
<120mV
Voltage ADJ. Range
3.0V~3.6V
4.4V~5.5V
10.0V~13.0V
13.8V~16.1V
20.7V~26.7V
Voltage Accuracy
±2.0%
±2.0%
±1.0%
±1.0%
±1.0%
Line Regulation
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
Load Regulation
±2.0%
±2.0%
±1.0%
±1.0%
±1.0%
Set-up Time
<2.0s (115VAC input, full load); <1.0s (230VAC input, full load)
Hold-up Time
>14ms (115VAC input, full load); >30ms (230VAC input, full load)
Temperature Coefficient
±0.03%/°C
Overshoot and Undershoot
<5.0%
Input Characteristics
Voltage Range
88VAC~264VAC, 127VDC~370VDC
Frequency Range
47Hz-63Hz
Efficiency
115VAC Input
70%
76%
80%
82%
84%
(Typical)
230VAC Input
71%
78%
82%
83%
85%
AC Current (max)
0.7A
0.7A
0.7A
0.7A
0.7A
Inrush Current (Typical)
20A@115VAC Cold start 40A@230VAC Cold start
Leakage Current
Input-Output: <0.25mA Input-PG: <0.75mA
Protection
Over Load (OLP)
105%~150% of rated output current, hiccup mode, auto recovery
Over Voltage (OVP)
105%~150% of rated output voltage, constant voltage
Short Circuit (SCP)
Long-term mode, auto recovery
Environmental Characteristics
Operating Amb. Temp. & Hum
-20°C~70°C; 20%~90% RH Non-Condensing
Storage Temp. & Hum
-40°C~85°C; 10%-95% RH Non-Condensing
Safety Standards
UL60950-1; EN60950-1: 2006
Withstand Voltage
Primary-Secondary: 3.0KVAC;≤10mA. Primary-PG: 1.5KVAC;≤10mA. Secondary-PG: 0.5KVDC;≤10mA
Isolation Resistance
≥100M ohms
EMI Conduction & Radiation
Compliance to EN55022(CISPR22) Class B
Harmonic Current
Compliance to EN61000-3-2,-3
EMS Immunity
Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, light industry level, criteria A
General Characteristics
Rev. C
MTBF (MIL-HDBK-217F)
More than 200,000Hrs (25°C, Full load)
Dimension (LxWxH)
79x51x28.8mm
Packing
48PCS/CTN. G.W: 10.4kgs
Cooling Method
Cooling by free air convection
Page 1 of 2
Qualtek
25Watts Single Output
Electronics Corporation
P
P C
QPD-25 Series
MECHANICAL SPECIFICATIONS
2-M3
2-M3
Pin No.
1
2
3
4
5
Assignment
AC-L
AC-N
F.G
DC output -V
DC output +V
UNIT: mm
ISO-9001 Company
www.qualtekusa.com
Page 2 of 2