Z75 THRU Z330 ZENER SILICON RECTIFIER VOLTAGE RANGE 75 to 330 Volts CURRENT 1.0 Watts FEATURES * * * * High reliability Low leakage Low forward voltage drop Excellent clamping capability DO-41 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.4 gram 1.0 (25.4) MIN. .205 (5.2) .166 (4.2) .034 (0.9) DIA. .028 (0.7) .107 (2.7) .080 (2.0) DIA. 1.0 (25.4) MIN. MA X IMU M R AT ING S A ND E L E C T R IC A L C HA R A C T E R IS T IC S R a tings a t 25 o C a mbie nt te mpe ra ture unle s s othe rwis e s pe c ifie d. S ingle pha s e , ha lf wa ve , 6 0 H z , re s is tive or induc tive loa d. F or c a pa c itive loa d, de ra te c urre nt by 2 0 % . Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25oC unless otherwise noted) Maximum Reverse TYPE Zener Dynamic Impedances Current Breakdown @ @ Measurement Voltage 25oC T A Voltage Maximum Forward Voltage @ 25 oC T A @ IF = 1.0A and 25oC TA VZ I ZT Z ZT I ZK Z ZK VR IR VF V mA Ohms mA Ohms V uA V 200 Z75 75 90 3.0 2.7 250 .25 .25 1500 2000 60 70 5.0 5.0 1.2 Z90 Z100 100 2.5 350 .25 3000 75 5.0 1.2 Z105 105 2.4 400 .25 3500 77 5.0 1.2 Z110 110 2.3 450 .25 4000 80 5.0 1.2 Z115 115 2.2 500 .25 4250 85 5.0 1.2 Z120 120 2.1 550 .25 4500 90 5.0 1.2 Z130 130 1.9 700 .25 5000 95 5.0 1.2 Z135 135 1.85 750 .25 5250 100 5.0 1.2 1.2 Maximum Reverse Zener TYPE Dynamic Impedances Current @ @ Measurement Breakdown o Voltage Voltage 25 C T A Maximum Forward Voltage @ 25 oC T A @ IF = 1.0A and 25 oC T A VZ I ZT Z ZT I ZK Z ZK VR IR VF V mA Ohms mA Ohms V uA V Z140 140 1.8 800 .25 5500 105 5.0 1.2 Z150 150 1.7 1000 .25 6000 110 5.0 1.2 Z160 160 1.6 1100 .25 6500 120 5.0 1.2 Z170 170 1.5 1200 .25 6750 130 5.0 1.2 Z180 180 1.4 1350 .25 7000 140 5.0 1.2 Z190 190 1.3 1500 .25 7500 150 5.0 1.2 Z200 200 1.2 1700 .25 8000 160 5.0 1.2 Z220 220 1.1 2000 .25 8250 170 5.0 1.2 Z240 240 1.0 2200 .25 8500 180 5.0 1.2 Z270 270 0.9 2500 .25 8750 200 5.0 1.2 Z300 300 0.8 3000 .25 9000 220 5.0 1.2 Z330 330 0.75 4000 .25 9500 240 5.0 1.2 OPERATING AND STORAGE TEMPERATURE - 55 oC to + 150 o C 2011-03 NOTE:1. Standard tolerance: +/-20%, Suffix “A” : +/-10% 2. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. 3. Available in Halogen-free epoxy by adding suffix -HF after the part nbr. REV:B 1.0 .75 .50 Single Phase Half Wave 60Hz Inductive or Resistive Load 0.375" (9.5mm) Lead Lengths 0 10 25 50 75 100 125 150 LEAD TEMPERATURE, FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS TJ = 25 .1 Pulse Width = 300us 1% Duty Cycle .4 .6 .8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, (V) 220 10000 175 1.0 .01 FIG. 2 - TYPICAL ZENER IMPEDANCE INSTANTANEOUS REVERSE CURRENT, (uA) .25 Zz, DYNAMIC IMPEDANCE (Ohms) FIG. 1 - MAXIMUM CONTINUOUS POWER DISSIPATION Ovz, TEMPERATURE COEFFICIENT (mV/ ) INSTANTANEOUS FORWARD CURRENT, (A) REVERSE POWER DISSIPATION, (W) RATING AND CHARACTERISTIC CURVES ( Z75 THRU Z330 ) TJ = 25 5000 iz = (rms) = 0.1Iz (dc) 2000 1000 Vz=200V 500 Vz=180V 200 100 Vz=160V 50 10 Vz=100V .5 1.0 5.0 10 20 50 100 200 500 Iz, ZENER TEST CURRENT (mA) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 4 TJ = 100 1.0 .4 .1 .04 TJ = 25 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 5 - TYPICAL TEMPERATURE COEFFICIENTS 200 180 150 120 100 80 100 110 120 130 140 150 160 170 180 190 200 Vz, ZENER VOLTAGE (V) DISCLAIMER NOTICE R ectron Inc res erves the right to make changes without notice to any product s pecification herein, to make corrections , modifications , enhancements or other changes . R ectron Inc or anyone on its behalf as s umes no res pons ibility or liability for any errors or inaccuracies . Data s heet s pecifications and its information contained are intended to provide a product des cription only. "T ypical" parameters which may be included on R E C T R ON data s heets and/ or s pecifications can and do vary in different applications and actual performance may vary over time. R ectron Inc does not as s ume any liability aris ing out of the application or us e of any product or circuit. R ectron products are not des igned, intended or authorized for us e in medical, life-s aving implant or other applications intended for life-s us taining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly caus e injury or threaten a life without expres s ed written approval of R ectron Inc. C us tomers us ing or s elling R ectron components for us e in s uch applications do s o at their own ris k and s hall agree to fully indemnify R ectron Inc and its s ubs idiaries harmles s agains t all claims , damages and expenditures .