RFHIC RTP21005-11

Preliminary
Power Amplifier Pallet
RTP21005-11
Product Features
Application
• GaN on SiC + Doherty Technology
• High Efficiency
• Solid-state Linear Design
• Small and Light Weight
• Suitable for WCDMA/LTE
• 50 Ohm Input/Output Impedance
• High Reliability and Ruggedness
• Built in Output Isolator
• WCDMA / LTE Repeater
Description
This HPA Module is a high gain and compact amplifier module for WCDMA and LTE Repeater use.
Electrical Specifications
PARAMETER
Symbol
Specification
Frequency Range
BW
2110 ~ 2170MHz
Operating Bandwidth within BW
OBW
5 ~ 20MHz
Output Power
Pout
37dBm/ WCDMA 4FA, LTE
SEM
PER 3GPP TS-25.141 & TS25.141
SPECTRUM EMISSION MASK
(with DPD)
-25dBc@±5MHz
Non-DPD
-28dBc@±10MHz
ACLR (WCDMA 4FA)
@ Po=+37dBm (typ.)
ACLR
With-DPD
Non-DPD
-28dBc@±10MHz
@ Po=+37dBm (typ.)
With-DPD
-52dBc@±10MHz
G
47dB ±3dB @frequency range, 5W Pavg,
Input Return Loss
S11
-16dB (Max.)
Output Return Loss
S22
-18dB (Max.)
Normal Operating Voltage
VDC
+5.6V~6V, +28V ~32V
Current Consumption
IDD
Efficiency
Eff
Gain Flatness
ΔG
Harmonics (2nd, with DPD)
H
-45dBc (Max.)
FB
+2dBm ± 1dB
Feedback Output level
@ 28V ~ 31V
-48dBc@±10MHz
ACLR (LTE 10MHz 1FA)
RF Gain
@-30 ~ +60°C
-45dBc@±5MHz
0.12A / 5.6V,
@ PAR 7.5dB
-30 ~ +60°C
0.42A / 28V (typ.)
40%@28V(typ.)
Peak to peak
Peak to peak
2dB Over operating frequency
0.5dB Over any 3.84MHz
@ 40dBm
Operating Temperature
To
-30℃ ~ + 60℃ (Ambient temp)
▪ Tel : 82-31-250-5078
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.1
Preliminary
Power Amplifier Pallet
RTP21005-11
Environmental Characteristics
Parameter
Symbol
Min.
Ta
Storage Temperature
Tstg
Relative humidity w/o condensation
RH
Operating Ambient Temperature
Typ.
Max.
Unit
-30
+60
°C
-40
+130
°C
95
%
Mechanical Specifications
Parameter
Dimensions
Value
Units
100.0 x 50.0 x 20.0
mm
0.2(MAX)
Kg
Weight
RF Input Connector
MCX(Female), customizable*
RF Output Coupling Connector
MCX(Female), customizable*
RF Output Connector
SMA(Female), customizable*
Limits
Molex_4pin male (0022035045)
DC Connector
External Heat-sink
Cooling
Maximum Rating
POD
-2dBm
Max.
Load VSWR
Ψ
∞ : 1 (All Phase & Amplitude)
Nom.
Operating Case Temperature
Tc
+100
°C
Input Overdrive
Interface Connector
Connector type: MOLEX_4pin male (0022035045)
Pin #
Description
I/O
Specifications
1
VDC1
I
+5.6V
2, 3
VDC2
I
+28V
4
GND
-
Ground
*Note: Based on the customer’s need, RFHIC can provide different types of connectors. Price may vary.
▪ Tel : 82-31-250-5078
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.1
Preliminary
Power Amplifier Pallet
RTP21005-11
Gain Budget & Block Diagram
Outline Drawing
Unit: mm
RF OUT
GND
Vdc
5.6V
FB
RF IN
CASE
PCB(0.8t)
GASKET(0.3t)
COVER
*Note:
Connector positions and module
mount holes may be subjected to
change.
▪ Tel : 82-31-250-5078
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.1
Preliminary
Power Amplifier Pallet
RTP21005-11
Photo of Product
Test Equipments:
- DPD Engine : TI(GC5325EVM) & Optichron board (OP6180)
- Signal Generator: E4438C (Agilent)
- Spectrum Analyzer: E4440A (Agilent)
- Network Analyzer: 8753E (HEWLET PACKARD)
- Power Supply: IPS-30B05DD (INTERACT)
Test Condition:
- Signal: WCDMA 4FA (Test Model 1 W/ 64DPCH) & LTE 10MHz 1FA
- PAR: 7.5dB
- CFR apply
-
Temperature: 25°C
AMP Temperature: 35°C
▪ Tel : 82-31-250-5078
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.1
Preliminary
Power Amplifier Pallet
RTP21005-11
Test Data
S11
GAIN & GAIN FLATNESS
S22
Psat = 46.0 dBm@2140MHz (Pulse duty cycle 10%)
Psat = 46.0 dBm@2120MHz (Pulse duty cycle 10%)
Psat = 45.8dBm@2160MHz (Pulse duty cycle 10%)
▪ Tel : 82-31-250-5078
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.1
Preliminary
Power Amplifier Pallet
RTP21005-11
Test Results: DPD Operation (WCDMA 4FA)
Pre - DPD@2120MHz
Post- DPD@2120MHz (TI)
Post- DPD@2120MHz (Optichron)
Pre - DPD@2140MHz
Post- DPD@2140MHz (TI)
Post- DPD@2140MHz (Optichron)
Pre - DPD@2160MHz
Post- DPD@2160MHz (TI)
Post- DPD@2160MHz (Optichron)
▪ Tel : 82-31-250-5078
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.1
Preliminary
Power Amplifier Pallet
RTP21005-11
Test Results: DPD Operation (LTE 10MHz 1FA)
Pre - DPD@2120MHz
Post- DPD@2120MHz (TI)
Post- DPD@2120MHz (Optichron)
Pre - DPD@2140MHz
Post- DPD@2140MHz (TI)
Post- DPD@2140MHz (Optichron)
Pre - DPD@2160MHz
Post- DPD@2160MHz (TI)
Post- DPD@2160MHz (Optichron)
▪ Tel : 82-31-250-5078
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.1
Preliminary
Power Amplifier Pallet
RTP21005-11
Test Sheet
S/N
Gain
47.7dB
Gain Flatness
0.5dB
S11 (Max.)
-20.0 dB
S22 (Max.)
-18.9dB
Test Frequency (Center)
2120MHz
2140 MHz
2160 MHz
Psat (dBm)
46.0
46.0
45.8
Pre-DPD
-27.1
-29.2
-31.1
Post-DPD (TI)
-49.0
-49.2
-49.7
Post-DPD (Optichron)
-54.4
-55.2
-55.6
Pre-DPD
-29.7
-31.6
-33.3
Post-DPD (TI)
-51.0
-52.2
-52.6
Post-DPD (Optichron)
-55.1
-55.8
-56.4
Pre-DPD
-33.8
-35.6
-37.2
Post-DPD (TI)
-52.0
-53.7
-54.2
Post-DPD (Optichron)
-56.1
-56.3
-56.7
408mA
413mA
424mA
41.2
40.8
39.8
Pre-DPD
-30.2
-32.5
-35.1
Post-DPD (TI)
-52.5
-53.0
-54.1
Post-DPD (Optichron)
-57.5
-58.1
-58.3
395mA
398mA
416mA
42.5
42.2
40.5
ACLR@±5MHz
(dBc)
WCDMA
4FA @5W
ACLR@±10MHz
(dBc)
PAR:7.5dB
ACLR@±15MHz
(dBc)
125mA/5.6V, Current/28V
Efficiency
LTE 10MHz
1FA @5W
%
ACLR@±10MHz
PAR:7.5dB
(dBc)
125mA/5.6V, Current/28V
Efficiency
%
RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not
assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or
incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for
inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not
intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells
such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders,
employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of
whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC.
▪ Tel : 82-31-250-5078
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.1