Preliminary • • • • • Designed for SDARS Receiver IF Application Low Insertion Loss 3.0 X 3.0 X 1.0 mm Surface-mount Case Differential Input and Output Complies with Directive 2002/95/EC (RoHS) SF2024E-1 467.751 MHz SAW Filter Pb Absolute Maximum Ratings Rating Maximum Incident Power in Passband DC Voltage on any Non-ground Terminal Value Units +10 dBm 30 VDC Operating Temperature Range -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C Suitable for Lead-free Soldering - Maximum Soldering Profile SM3030-8 260 °C for 30 s Electrical Characteristics Characteristic Center Frequency Insertion Loss Amplitude Ripple fc-6.250 to fc-4.3925 MHz fc-4.3925 to fc-2.535 MHz fc-2.5350 to fc-0.025 MHz fc+0.025 to fc+2.535 MHz fc+2.5350 to fc+4.3925 MHz fc+4.3925 to fc+6.250 MHz 2.0 dB Bandwidth, Centered at fc 3.0 dB Bandwidth Low Side Attenuation between 455.751 to 457.251 MHz (fc-10.5 MHz) Low Side Attenuation Below 455.751 MHz High Side Attenuation between 476.751 to 479.751 MHz (fc+9.0 MHz) High Side Attenuation Above 479.751 MHz Temperature Coefficient of Frequency Group Delay Ripple: fc-6.250 to fc-4.3925 MHz fc-4.3925 to fc-2.535 MHz fc-2.5350 to fc-0.025 MHz fc+0.025 to fc+2.535 MHz fc+2.5350 to fc+4.3925 MHz fc+4.3925 to fc+6.250 MHz Case Style Lid Symbolization (YY=year, WW=week, S=shift) See note 4 Sym fC IL Notes 1 Min Typ Max Units 467.704 467.751 12 467.798 14.5 MHz dB 1.0 0.6 1.7 1.2 0.7 0.8 13.0 13.9 37 33 27 38 2.0 2.0 2.2 2.0 2.0 2.0 dBP-P 1, 2 32 28 20 32 MHz dB -18 1, 2, 3 6 ppm/K 43 100 27 100 20 120 nsP-P 27 120 27 100 32 100 SM3030-8 3.0 x 3.0 mm Nominal Footprint TBD YWWS CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: Notes: 1. 2. 3. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout www.RFM.com E-mail: [email protected] ©2008-2010 by RF Monolithics, Inc. 4. 5. 6. 7. and external impedance matching design. See Application Note No. 42 for details. The design, manufacturing process, and specifications of this filter are subject to change. Tape and Reel Standard Per ANSI / EIA 481. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. Page 1 of 4 SF2024E-1 - 7/21/10 12PF 8 J1 1 1PF L1 7 18NH 8.2PF J2 2 SF2024E-1 DEMO 6 12PF J4 L2 3 18NH 1PF 5 J3 8.2PF 4 INDUCTOR, 0402 COIL CRAFT CAP, 0201 www.RFM.com E-mail: [email protected] ©2008-2010 by RF Monolithics, Inc. Page 2 of 4 SF2024E-1 - 7/21/10 8-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension J J I J K N I A B C D E F G H I J K L M N O L M N mm Nom 3.0 3.0 1.27 0.92 0.75 0.60 0.60 1.20 3.19 0.81 0.96 0.81 1.39 0.23 0.38 Min 2.87 2.87 1.14 0.79 0.62 0.47 0.47 1.07 Max 3.13 3.13 1.40 1.05 0.88 0.73 0.73 1.33 Min 0.113 0.113 0.045 0.031 0.024 0.018 0.018 0.042 Inches Nom 0.118 0.118 0.050 0.036 0.029 0.024 0.024 0.047 0.126 0.032 0.038 0.032 0.055 0.009 0.015 Max 0.123 0.123 0.055 0.041 0.034 0.029 0.029 0.052 Case Materials Materials K O O Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free PCB Footprint Top View TOP VIEW BOTTOM VIEW 1 2 8 7 1 6 6 2 5 5 3 7 504 YWWS A E C B 8 3 H G 4 4 D www.RFM.com E-mail: [email protected] ©2008-2010 by RF Monolithics, Inc. F Page 3 of 4 SF2024E-1 - 7/21/10 Inches "B" REF. 100 REF. Tape and Reel Specifications “B” millimeters Quantity Per Reel 7 178 500 13 330 3000 See Detail "A" Carrier Tape Dimensions 13. 0 12.0 Ao 3.35 mm Bo 3.35 mm Ko 1.4 mm Pitch 8.0 mm W 12.0 mm 20 .2 2.0 COMPONENT ORIENTATION 2.0 4.0 A 1.5 PIN #1 1.75 0.3 3.35 B 3.35 12.0 5.5 RO.3 (MAX.) B 8.0 A 1.4 R0.5 (TYP.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: [email protected] ©2008-2010 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 4 of 4 SF2024E-1 - 7/21/10