2SC5231A Ordering number : ENA1077A SANYO Semiconductors DATA SHEET NPN Epitaxial Planar Silicon Transistor 2SC5231A VHF to UHF Wide-Band Low-Noise Amplifier Applications Features • • • • Low-noise : NF=1.0dB typ (f=1GHz) High gain : ⏐S21e⏐2=12dB typ (f=1GHz) High cut-off frequency : fT=7GHz typ Ultrasmall-sized package permitting applied sets to be made small and slim Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Dissipation Conditions Ratings 20 V 10 V VEBO IC 2 V 70 mA 100 mW Junction Temperature PC Tj Storage Temperature Tstg 150 °C --55 to +150 °C Product & Package Information unit : mm (typ) 7027A-002 • Package : SMCP • JEITA, JEDEC : SC-75, SOT-416 • Minimum Packing Quantity : 3,000 pcs./reel 0.1 3 2SC5231A-8-TL-E 2SC5231A-9-TL-E 0.8 TL 2 0.2 0.6 0.5 0.5 0 to 0.1 C RANK 0.4 Marking LOT No. 1 0.75 Packing Type: TL LOT No. 1.6 0.4 0.3 0.1 MIN Package Dimensions 1.6 Unit VCBO VCEO Electrical Connection 1 : Base 2 : Emitter 3 : Collector 3 SANYO : SMCP 1 2 http://www.sanyosemi.com/en/network/ 82212 TKIM/51408AB TIIM TC-00001355 No. A1077-1/8 2SC5231A Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO VCB=10V, IE=0A VEB=1V, IC=0A Gain-Bandwidth Product hFE fT VCE=5V, IC=20mA VCE=5V, IC=20mA Output Capacitance Cob Reverse Transfer Capacitance Cre Emitter Cutoff Current DC Current Gain Forward Transfer Gain Noise Figure Ratings Conditions min typ Unit max 60* 1.0 μA 10 μA 270* 5 7 GHz 0.7 VCB=10V, f=1MHz 1.2 pF 0.45 pF 12 dB 2 ⏐S21e⏐ 1 VCE=5V, IC=20mA, f=1GHz 2 ⏐S21e⏐ 2 VCE=2V, IC=3mA, f=1GHz 8.5 NF VCE=5V, IC=7mA, f=1GHz 1.0 9 dB 1.8 dB * : The 2SC5231A is classified by 20mA hFE as follows : Rank hFE 7 60 to 120 8 90 to 180 9 135 to 270 Ordering Information Package Shipping 2SC5231A-8-TL-E Device SMCP 3,000pcs./reel 2SC5231A-9-TL-E SMCP 3,000pcs./reel hFE -- IC 3 fT -- IC VCE=5V VCE=5V Gain-Bandwidth Product, fT -- GHz DC Current Gain, hFE Pb Free 2 2 100 7 5 3 2 10 10 7 5 3 2 1.0 7 7 5 5 3 5 7 1.0 3 2 5 7 10 2 5 3 Collector Current, IC -- mA 7 100 2 ITR07968 7 1.0 2 3 5 Reverse Transfer Capacitance, Cre -- pF f=1MHz 1.0 7 5 3 2 0.1 7 5 2 10 3 5 7 100 2 ITR07964 Cre -- VCB 3 2 7 Collector Current, IC -- mA Cob -- VCB 3 Output Capacitance, Cre -- pF memo f=1MHz 2 1.0 7 5 3 2 0.1 7 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Collector-to-Base Voltage, VCB -- V 2 3 ITR07965 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Collector-to-Base Voltage, VCB -- V 2 3 ITR07966 No. A1077-2/8 2SC5231A NF -- IC Noise Figure, NF -- dB 8 6 4 2 12 10 8 6 4 2 0 5 7 1.0 2 3 5 7 10 2 3 5 Collector Current, IC -- mA 7 100 2 ITR07963 PC -- Ta 120 Collector Dissipation, PC -- mW f=1GHz V CE = 5V V CE = 2V VCE=5V f=1GHz 10 0 3 ⏐S21e⏐2 -- IC 14 Forward Transfer Gain, ⏐S21e⏐2 -- dB 12 3 5 7 1.0 2 3 5 7 10 2 3 Collector Current, IC -- mA 5 7 100 2 ITR07967 100 80 60 40 20 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 ITR07969 No. A1077-3/8 2SC5231A S11e f=100MHz, f=200MHz to 2000MHz(200MHz Step) S21e f=100MHz, f=200MHz to 2000MHz(200MHz Step) 90° j50 j25 0.1GHz j100 VCE=5V IC=20mA j150 V CE=5V I C=7mA 0.1GHz V =2 E mA C V =3 I C z 2.0GHz GH 0.1 150° j200 j250 j10 2.0GHz 2.0GHz 2.0GHz 0 10 25 50 100 150 250 ±180° VCE=5V IC=20mA --j10 VCE=2V IC=3mA V =5 0.1GHz V CE=7mA --j250 --j200 0.1GHz I C GHz 0.1 --j150 60° 120° 10 15 20 25 0 --30° --60° --120° --90° ITR07970 S12e f=100MHz, f=200MHz to 2000MHz(200MHz Step) ITR07971 S22e f=100MHz, f=200MHz to 2000MHz(200MHz Step) 90° j50 60° VCE=5V 2.0GHz IC=7mA VCE=5V 2.0GHz IC=20mA 2.0GHz j25 j200 j250 j10 100 0 10 --j10 --30° --150° j100 j150 30° 0.1GHz VCE=2V IC=3mA 0.1GHz 0.1GHz 0.04 0.08 0.12 0.16 0.2 0 ±180° 5 --150° --j50 150° 2.0GHz 2.0GHz --j100 --j25 120° 30° --j25 25 VCE=5V 150 250 IC=20mA 0.1GHz V 2.0GHz CE=5V IC=7mA GHz 2.0GHz 0.1 --j250 2.0GHz z 0.1GH --j200 VCE=2V --j150 IC=3mA --j100 50 --60° --120° --90° ITR07972 --j50 ITR07973 No. A1077-4/8 2SC5231A S Parameters (Common emitter) VCE=5V, IC=7mA, ZO=50Ω Freq(MHz) 100 200 400 600 800 1000 1200 1400 1600 1800 2000 ⏐S11⏐ 0.786 0.677 0.546 0.492 0.473 0.465 0.457 0.451 0.449 0.454 0.460 ∠S11 -40.7 -72.4 -112.7 -135.2 -150.0 -160.0 -169.5 -176.2 177.8 172.5 167.1 ⏐S21⏐ 17.507 13.998 9.061 6.442 5.005 4.073 3.449 2.989 2.658 2.378 2.154 ∠S21 151.3 131.4 108.6 96.1 87.3 80.4 74.0 68.6 63.8 58.4 54.0 ⏐S12⏐ 0.028 0.046 0.064 0.076 0.087 0.099 0.111 0.124 0.138 0.151 0.166 ∠S12 70.1 58.0 49.6 49.3 50.8 52.6 54.0 55.2 56.6 56.7 56.7 ⏐S22⏐ 0.898 0.739 0.525 0.423 0.374 0.346 0.332 0.321 0.319 0.313 0.311 ∠S22 -20.4 -33.4 -43.7 -46.7 -44.4 -49.7 -51.6 -54.1 -56.2 -60.0 -63.2 ∠S11 -65.8 -103.7 -139.6 -156.6 -166.6 -174.0 178.6 173.8 169.6 165.1 160.3 ⏐S21⏐ 28.967 19.309 10.891 7.461 5.695 4.613 3.870 3.345 2.960 2.655 2.406 ∠S21 137.1 116.6 98.6 89.3 82.5 77.0 71.8 66.9 62.7 58.0 54.0 ⏐S12⏐ 0.023 0.035 0.050 0.065 0.081 0.098 0.114 0.131 0.148 0.165 0.182 ∠S12 64.1 57.0 58.7 61.3 63.1 63.8 63.9 63.6 63.2 61.8 60.6 ⏐S22⏐ 0.757 0.534 0.345 0.280 0.251 0.235 0.226 0.221 0.220 0.219 0.218 ∠S22 -32.9 -50.3 -50.3 -50.7 -51.3 -52.9 -55.1 -57.7 -60.2 -64.8 -68.3 ∠S11 -30.2 -56.4 -96.0 -120.7 -138.0 -150.7 -161.2 -169.3 -176.4 177.1 170.9 ⏐S21⏐ 9.280 8.218 6.074 4.517 3.610 2.995 2.540 2.213 1.982 1.774 1.614 ∠S21 158.6 141.3 116.7 101.4 90.4 81.9 74.2 67.5 62.0 55.9 50.9 ⏐S12⏐ 0.038 0.067 0.098 0.112 0.120 0.125 0.131 0.137 0.143 0.152 0.163 ∠S12 73.6 60.5 45.1 38.4 35.8 35.7 36.5 38.4 40.7 42.5 44.7 ⏐S22⏐ 0.949 0.849 0.657 0.539 0.475 0.434 0.410 0.393 0.391 0.382 0.381 ∠S22 -15.1 -26.9 -41.1 -47.6 -51.2 -54.5 -57.5 -60.7 -64.0 -67.8 -72.1 VCE=5V, IC=20mA, ZO=50Ω Freq(MHz) 100 200 400 600 800 1000 1200 1400 1600 1800 2000 ⏐S11⏐ 0.601 0.497 0.435 0.419 0.414 0.413 0.413 0.411 0.413 0.416 0.422 VCE=2V, IC=3mA, ZO=50Ω Freq(MHz) 100 200 400 600 800 1000 1200 1400 1600 1800 2000 ⏐S11⏐ 0.888 0.815 0.690 0.616 0.584 0.566 0.555 0.546 0.541 0.545 0.547 No. A1077-5/8 2SC5231A Embossed Taping Specification 2SC5231A-8-TL-E, 2SC5231A-9-TL-E No. A1077-6/8 2SC5231A Outline Drawing 2SC5231A-8-TL-E, 2SC5231A-9-TL-E Land Pattern Example Mass (g) Unit 0.003 mm * For reference Unit: mm 0.7 1.3 0.7 0.7 0.6 0.5 0.5 No. A1077-7/8 2SC5231A Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of August, 2012. Specifications and information herein are subject to change without notice. PS No. A1077-8/8