MCH6337 Ordering number : ENA0959A SANYO Semiconductors DATA SHEET P-Channel Silicon MOSFET MCH6337 General-Purpose Switching Device Applications Features • • • Low ON-resistance 1.8V drive Protection diode in • • Ultrahigh-speed switching Halogen free compliance Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Drain-to-Source Voltage Conditions Ratings Unit VDSS VGSS Gate-to-Source Voltage Drain Current (DC) --20 V ±10 V Allowable Power Dissipation ID IDP PD 1.5 W Channel Temperature Tch 150 °C Storage Temperature Tstg --55 to +150 °C Drain Current (Pulse) PW≤10μs, duty cycle≤1% When mounted on ceramic substrate (1200mm2×0.8mm) --4.5 A --18 A Product & Package Information unit : mm (typ) 7022A-009 • Package : MCPH6 • JEITA, JEDEC : SC-88, SC-70-6, SOT-363 • Minimum Packing Quantity : 3,000 pcs./reel 2.0 6 5 0.15 4 1 2 0.3 0.85 1 6 2 5 3 4 YL TL 3 0.65 Marking LOT No. 0.25 Packing Type : TL LOT No. 0.07 MCH6337-TL-E MCH6337-TL-H 0 t o 0.02 2.1 1.6 0.25 Package Dimensions Electrical Connection 1, 2, 5, 6 1 : Drain 2 : Drain 3 : Gate 4 : Source 5 : Drain 6 : Drain 3 SANYO : MCPH6 4 http://semicon.sanyo.com/en/network 61312 TKIM/13008PE TIIM TC-00001170 No. A0959-1/7 MCH6337 Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage V(BR)DSS IDSS Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Forward Transfer Admittance IGSS VGS(off) | yfs | Static Drain-to-Source On-State Resistance RDS(on)1 RDS(on)2 Cutoff Voltage RDS(on)3 Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Conditions Ratings min ID=--1mA, VGS=0V VDS=--20V, VGS=0V VGS=±8V, VDS=0V --20 VDS=--10V, ID=--1mA VDS=--10V, ID=--3A --0.4 3.5 ID=--3A, VGS=--4.5V ID=--1.5A, VGS=--2.5V ID=--0.5A, VGS=--1.8V typ Unit max V --1 μA ±10 μA --1.3 5.9 V S 37 49 mΩ 53 75 mΩ 85 130 mΩ 670 pF 130 pF Crss 94 pF Turn-ON Delay Time td(on) 8.4 ns Rise Time tr td(off) 45 ns 69 ns Turn-OFF Delay Time Fall Time VDS=--10V, f=1MHz See specified Test Circuit. tf Qg Total Gate Charge Gate-to-Source Charge Qgs Gate-to-Drain “Miller” Charge Qgd Diode Forward Voltage VSD VDS=--10V, VGS=--4.5V, ID=--4.5A IS=--4.5A, VGS=0V 63 ns 7.3 nC 1.3 nC 2.1 nC --0.82 --1.2 V Switching Time Test Circuit VDD= --10V VIN 0V --4.5V ID= --3A RL=3.33Ω VIN D VOUT PW=10μs D.C.≤1% G MCH6337 P.G 50Ω S Ordering Information Package Shipping memo MCH6337-TL-E Device MCPH6 3,000pcs./reel Pb Free MCH6337-TL-H MCPH6 3,000pcs./reel Pb Free and Halogen Free No. A0959-2/7 MCH6337 ID -- VDS --6.0 V --4.0 ID -- VGS --7 --4.5V --2.5 V --4.5 VDS= --10V --1.8V --6 --2.0 VGS= --1.5V --1.5 --4 --3 --2 --25°C --2.5 --5 Ta=7 5°C --3.0 Drain Current, ID -- A --8.0V Drain Current, ID -- A --3.5 --1 --0.5 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Drain-to-Source Voltage, VDS -- V 0 --1.0 Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 160 140 120 ID= --0.5A --1.5A 80 --3.0A 60 40 20 0 --1 --2 --3 --4 --5 --6 --7 Gate-to-Source Voltage, VGS -- V 5A 80 --1.5A , I D= V 5 . 2 = -VGS --3.0A ,I = --4.5V D = V GS 60 40 20 --40 --20 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 10 140 160 IT13001 IS -- VSD --10 7 5 VGS=0V 3 7 Source Current, IS -- A Forward Transfer Admittance, | yfs | -- S --2.5 IT12999 --0. , I D= --1.8V = VGS 100 0 --60 --8 VDS= --10V 5 3 = Ta 2 5°C --2 °C 75 1.0 °C 25 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 0.1 --0.01 --2.0 120 IT13000 | yfs | -- ID 2 --1.5 RDS(on) -- Ta 140 180 0 --1.0 Gate-to-Source Voltage, VGS -- V Ta=25°C 100 --0.5 IT12998 RDS(on) -- VGS 200 Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ --0.9 Ta=7 5°C 25°C --25° C 0 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Drain Current, ID -- A 0 5 7 --10 IT13002 --0.4 --0.6 --0.8 --1.0 --1.2 IT13003 Ciss, Coss, Crss -- VDS 3 VDD= --10V VGS= --4.5V 7 5 --0.2 Diode Forward Voltage, VSD -- V SW Time -- ID 1000 f=1MHz 2 3 2 Ciss, Coss, Crss -- pF Switching Time, SW Time -- ns 25°C --1.0 td(off) tf 100 7 5 3 2 tr td(on) 10 Ciss 7 5 3 2 Coss Crss 100 7 5 3 --0.01 1000 7 5 2 3 5 7 --0.1 2 3 5 7 --1.0 Drain Current, ID -- A 2 3 5 7 --10 IT13004 0 --2 --4 --6 --8 --10 --12 --14 --16 Drain-to-Source Voltage, VDS -- V --18 --20 IT13005 No. A0959-3/7 MCH6337 VGS -- Qg 5 3 2 VDS= --10V ID= --4.5A --4.0 --3.5 Drain Current, ID -- A Gate-to-Source Voltage, VGS -- V --4.5 --3.0 --2.5 --2.0 --1.5 --1.0 --0.5 0 0 1 2 3 4 5 6 Total Gate Charge, Qg -- nC 8 IT13006 PD -- Ta 1.6 Allowable Power Dissipation, PD -- W 7 --10 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 ASO PW≤10μs 10 0μ s ID= --4.5A 1m s 1 0 DC ms op 1 era 00m tio n( s Ta =2 5° C) Operation in this area is limited by RDS(on). IDP= --18A Ta=25°C Single pulse When mounted on ceramic substrate (1200mm2×0.8mm) --0.01 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 Drain-to-Source Voltage, VDS -- V 2 3 IT13007 When mounted on ceramic substrate (1200mm2×0.8mm) 1.5 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT12997 No. A0959-4/7 MCH6337 Taping Specification MCH6337-TL-E, MCH6337-TL-H No. A0959-5/7 MCH6337 Outline Drawing MCH6337-TL-E, MCH6337-TL-H Land Pattern Example Mass (g) Unit 0.008 mm * For reference Unit: mm 2.1 0.6 0.4 0.65 0.65 No. A0959-6/7 MCH6337 Note on usage : Since the MCH6337 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of June, 2012. Specifications and information herein are subject to change without notice. PS No. A0959-7/7