Z-Power LED X10490 Technical Data Sheet RoHS Specification Acrich2 – Bulb 100V 8.7W SMJE-1V08W1P2 SSC Drawn Approval Customer Approval Rev. 02 1 October 2012 www.Acrich.com Z-Power LED X10490 Technical Data Sheet Acrich2 Acrich2 - 100V 8.7W Bulb Features Description The Acrich 2 series, which are designed for AC drive(or • Connect using a AIC directly to AC power • High Power Efficiency • High Power Factor • Low THD • Long Life Time • Simplest BOM • Miniaturization • Lead Free product • RoHS compliant operation), do not need the standard converter essential for a conventional general lighting product. The modules also have a high power factor which can contribute to high energy savings in many lighting applications. Since there is no need for a converter, the Acrich 2 series lifetime can be estimated Applications • • • • Bulb light Down light Factory Ceiling light Industrial Light closer to the LED because it is not as dependent on the other electronics in the system. It also allows for better utilization of space without the converter. Rev. 02 2 October 2012 www.Acrich.com Z-Power LED X10490 Technical Data Sheet [ Contents ] 1. Characteristics ---------------------------- 4 2. Thermal Resistance -------------------------6 3. Color spectrum------------------------------7 4. Power characteristics-----------------------8 5. Radiation pattern--------------------------9 6. Color & Binning--------------------------10 7. Marking-------------------------------------11 8. Outline dimensions-------------------------11 9. Circuit Drawing---------------------------12 10. P a c k i n g - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 3 11. Usage precautions---------------------- 14 12. Handling of silicone resin for LEDs-------14 13. Handling with regards to static electricity--15 14. S t o r a g e b e f o r e u s e - - - - - - - - - - - - - - - - - - - 1 5 Rev. 02 3 October 2012 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 1. Characteristics 1-1-1. Electro-Optical characteristics of SMJE-1V08W1P2-G rank Parameter Symbol Value Unit Min Typ ФV [3] 520 570 Correlated Color Temperature [4] CCT 2900 3000 3200 K CRI Ra 80 - - - Luminous Flux [2] Operating Voltage [5] vopt Max lm 100 8.2 8.5 V[RMS] Power Dissipation PD 8.8 W Operating Frequency Freq 50 / 60 Hz Power Factor PF Over 0.95 - View Angle 2Θ 1/2 120 deg. 1-1-2. Electro-Optical characteristics of SMJE-1V08W1P2-H rank Parameter Symbol Value Typ ФV [3] 510 550 Correlated Color Temperature [4] CCT 2600 2700 2900 K CRI Ra 80 - - - Luminous Flux [2] Operating Voltage [5] vopt Max Unit Min lm 100 8.2 8.5 V[RMS] Power Dissipation PD 8.8 W Operating Frequency Freq 50 / 60 Hz Power Factor PF Over 0.95 - View Angle 2Θ 1/2 120 deg. Rev. 02 4 October 2012 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 1-2 Absolute Maximum Ratings Parameter Symbol Value Unit Max. Voltage vopt 120 V[RMS] Power Dissipation Pd 11.5 W Operating Temperature Topr -30 ~ 85 ºC Storage Temperature Tstg -40 ~ 100 ºC ESD Sensitivity - ±4,000V HBM - * Notes : [1] At 100V RMS, Ta=25ºC [2] Acrich 2 series maintain the tolerance of 10% on flux and power measurements. [3] ФV is the total luminous flux output measured with an integrated sphere. [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. [5] Operating Voltage doesn't indicate the maximum voltage which customers use but means tolerable voltage according to each country’s voltage variation rate. It is recommended that the solder pad temperature should be below 70℃. Rev. 02 5 October 2012 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 2. Thermal Resistance Part Package Power Dissipation [W] Maximum Junction Temp[℃] Rθj-s [℃/W] Acrich2 LED SAW8KG0A Max 0.5 125 27 Acrich2 IC Max 1.5 125 5.5 The Acrich2 LED has a thermal resistance of 27degC/W from junction to the LED lead. The maximum junction temperature of Acrich2 LED package is 125degC, therefore the maximum lead temperature Ts_max is Ts_max = Tj_max - (Rqj-s * PD) = 125℃ - (27℃/W * 0.5W) = 111.5℃ Although this is the maximum lead temperature, it is recommended to keep the lead temperature under 70degC The Acrich2 IC has a 5.5degC/W thermal resistance from junction to the top surface. The maximum junction temperature (Tt_max) of the IC is 125degC, therefore the maximum temperature of the top of the IC is Tt_max = Tj_max - (yj-t * PD) = 125℃ - (5.5℃/W * 1.5W) = 116.8℃ Rev. 02 6 October 2012 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 3. Color spectrum Relative Spectral Power Distribution at Ta=25oC Relative Spectral Power Distribution 1.20 1.00 0.80 0.60 0.40 0.20 0.00 300 400 500 600 700 800 Wavelength[nm] Rev. 02 7 October 2012 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 4. Power characteristic Relative Power Distribution vs. Voltage at Ta=25℃ 1.6 Relative Power Distribution 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 80 90 100 110 120 130 140 Voltage(Vac) Relative Luminous Flux vs. Voltage at Ta=25℃ 1.4 Relative Luminous Flux 1.2 1.0 0.8 0.6 0.4 0.2 0.0 80 90 100 110 120 130 140 Voltage(Vac) Rev. 02 8 October 2012 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 5. Radiation Pattern Rev. 02 9 October 2012 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 6. Color & Binning 6-1. Warm White Ansi binning structure range 2,600K(H) to 3,200K(G) 0.44 0.43 H1 H0 0.42 G1 G0 CIEy 0.41 H3 H2 G3 G2 0.40 H4 H5 G5 0.39 G4 0.38 0.37 0.40 Bin code G0 G3 H0 H3 0.41 0.42 0.43 Bin code 0.44 0.45 CIEx 0.46 X Y X Y 0.4299 0.4165 0.4430 0.4248 0.4048 0.4374 0.4374 0.4093 0.4499 0.4138 0.4430 0.4212 0.4562 0.4374 0.4093 0.4317 0.3973 0.4436 0.4015 0.4499 0.4138 0.4562 0.4260 0.4499 0.4138 0.4620 0.4166 0.4687 0.47 0.49 X Y 0.4212 0.4248 0.4048 0.4093 0.4198 0.3931 0.4317 0.3973 0.4260 0.4374 0.4093 0.4198 0.3931 0.4317 0.3973 0.4147 0.3814 0.4259 0.3853 0.4259 0.3853 0.4373 0.3893 0.4317 0.3973 0.4436 0.4015 0.4687 0.4289 0.4499 0.4138 0.4620 0.4166 0.4436 0.4015 0.4740 0.4194 0.4551 0.4042 0.4289 0.4810 0.4319 0.4620 0.4166 0.4620 0.4166 0.4436 0.4015 0.4551 0.4042 0.4551 0.4042 0.4373 0.3893 0.4483 0.3919 0.4666 0.4069 0.4483 0.3919 0.4593 0.3944 0.4740 0.4194 0.4551 0.4042 0.4666 0.4069 G1 G4 H1 H4 Bin code 0.48 G2 G5 H2 H5 Rev. 02 10 October 2012 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 7. Marking XXXXXX – 제조 년 월 일 XX년XX월XX일 8. Outline dimensions * Notes : [1] All dimensions are in millimeters. (Tolerance : ±0.2) [2] Scale : none Rev. 02 11 October 2012 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 9. Circuit Drawing Rev. 02 12 October 2012 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 10. Packing ๏ 1Box : 50 PCS per tray x 10 layer = 500 PCS ∴ about 5.85kg ๏ Box size( L x W x H ) = 590 x 330 x 260 Rev. 02 13 October 2012 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 11. Usage precautions • Please review the Acrich2 Module Application Note for protective circuitry component usage. • Please note, the Acrich products run on high voltage so use caution when near the the device which the circuit is active. • DO NOT touch any of the circuit board, components or terminals with body or metal while circuit is active. • Please do not add or change wires while Acrich circuit is active • Long time exposure of sunlight or occasional UV exposure will cause lens discoloration. • Please do not use adhesives to attach the LED that outgas organic vapor. • Please do not use together with the materials containing Sulfur • Please do not assemble under the condition of moisture and oxidizing gas in the air(Cl, H2S,NH3,SO2,NOX,etc) 12. Handling of silicone resin for LEDs • • Acrich series is encapsulated with silicone resin for high optical efficiency. Please do not touch the silicone resin area with sharp objects such as pincette(tweezers). • Finger prints on silicone resin area may affect the performance. • Please store LEDs in covered containers as it is dust sensitive. • Excessive force more than 3000gf to the silicone lens can result in fatal or permanent damage with LEDs. • Please do not cover the silicone resin area with any other resins such as epoxy, urethane, etc. Rev. 02 14 October 2012 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 13. Handling with regards to static electricity • The Acrich2 modules use an integrated circuit (IC) which can be damaged when exposed to static electricity. Please handle using equipment that prevents static electricity. Do not touch unless ESD protection is used. • The Acrich2 modules should also not be installed in end equipment with out ESD protection. 14. Storage before use • Do not impact or place pressure on this product because even a small amount of pressure can damage the product. The product should also not be placed in high temperatures, high humidity or direct sunlight since the device is sensitive to these conditions. (1) Please, confirm the lists below, when storing it in a long term. * It should be stored in the anti-static bag that Seoul-Semiconductor packed without opening it. * If you opened it in order to prevent humidity, you should seal it and not let the air and humidity into the bag. Rev. 02 15 October 2012 www.Acrich.com