SEOUL SMJE

Z-Power LED
X10490
Technical
Data
Sheet
RoHS
Specification
Acrich2 – Bulb
100V 13W
SMJE-1V12W1P2
SSC
Drawn
Approval
Customer
Approval
Rev. 02
1
October 2012
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
Acrich2
Acrich2 - 100V 13W Bulb
Features
Description
The Acrich 2 series, which are designed for AC drive(or
• Connect using a AIC
directly to AC power
• High Power Efficiency
• High Power Factor
• Low THD
• Long Life Time
• Simplest BOM
• Miniaturization
• Lead Free product
• RoHS compliant
operation), do not need the standard converter essential for a
conventional general lighting product.
The modules also have a high power factor which can contribute
to high energy savings in many lighting applications.
Since there is no need for a converter, the Acrich 2 series lifetime can be estimated
Applications
•
•
•
•
Bulb light
Down light
Factory Ceiling light
Industrial Light
closer to the LED because it is not as dependent on the other
electronics in the system.
It also allows for better utilization of space without the converter.
Rev. 02
2
October 2012
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
[ Contents ]
1.
Characteristics ---------------------------- 4
2.
Thermal Resistance --------------------------6
3.
Color spectrum------------------------------7
4.
Power characteristics-----------------------8
5.
Radiation pattern--------------------------9
6.
Color & Binning--------------------------10
7.
Marking------------------------------------------11
8.
Outline dimensions------------------------11
9.
Circuit Drawing---------------------------12
10. Packing-----------------------------------13
11. Usage precautions ---------------------- 14
12. Handling of silicone resin for LEDs-------14
13. Handling with regards to static electricity--15
14. S t o r a g e b e f o r e u s e - - - - - - - - - - - - - - - - - - - 1 5
Rev. 02
3
October 2012
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
1. Characteristics
1-1-1. Electro-Optical characteristics of SMJE-1V12W1P2-G rank
Parameter
Symbol
Value
Unit
Min
Typ
Max
ФV [3]
780
820
-
lm
Correlated Color
Temperature [4]
CCT
2900
3000
3200
K
CRI
Ra
80
-
-
-
Luminous Flux
[2]
Operating Voltage
[5]
vopt
100
12.3
12.7
V[RMS]
Power Dissipation
PD
13.1
W
Operating Frequency
Freq
50 / 60
Hz
Power Factor
PF
Over 0.95
-
View Angle
2Θ 1/2
120
deg.
1-1-2. Electro-Optical characteristics of SMJE-1V12W1P2-H rank
Parameter
Symbol
Value
Unit
Min
Typ
Max
ФV [3]
780
810
-
lm
Correlated Color
Temperature [4]
CCT
2600
2700
2900
K
CRI
Ra
80
-
-
-
Luminous Flux
[2]
Operating Voltage
[5]
vopt
100
12.3
12.7
V[RMS]
Power Dissipation
PD
13.1
W
Operating Frequency
Freq
50 / 60
Hz
Power Factor
PF
Over 0.95
-
View Angle
2Θ 1/2
120
deg.
Rev. 02
4
October 2012
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
1-2 Absolute Maximum Ratings
Parameter
Symbol
Value
Unit
Max. Voltage
vopt
120
V[RMS]
Power Dissipation
Pd
17.5
W
Operating Temperature
Topr
-30 ~ 85
ºC
Storage Temperature
Tstg
-40 ~ 100
ºC
ESD Sensitivity
-
±4,000V HBM
-
* Notes :
[1] At 100V RMS, Ta=25ºC
[2] Acrich 2 series maintain the tolerance of 10% on flux and power measurements.
[3] ФV is the total luminous flux output measured with an integrated sphere.
[4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram.
[5] Operating Voltage doesn't indicate the maximum voltage which customers use but
means tolerable voltage according to each country’s voltage variation rate.
It is recommended that the solder pad temperature should be below 70℃.
Rev. 02
5
October 2012
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
2. Thermal Resistance
Part
Package Power
Dissipation [W]
Maximum Junction
Temp[℃]
Rθj-s
[℃/W]
Acrich2 LED
SAW8KG0A Max 0.5
125
27
Acrich2 IC
Max 1.5
125
5.5
The Acrich2 LED has a thermal resistance of 27degC/W from junction to the LED lead.
The maximum junction temperature of Acrich2 LED package is 125degC, therefore the maximum
lead temperature Ts_max is
Ts_max = Tj_max - (Rqj-s * PD)
= 125℃ - (27℃/W * 0.5W) = 111.5℃
Although this is the maximum lead temperature, it is recommended to keep the lead temperature
under 70degC
The Acrich2 IC has a 5.5degC/W thermal resistance from junction to the top surface.
The maximum junction temperature (Tt_max) of the IC is 125degC, therefore the maximum
temperature of the top of the IC is
Tt_max = Tj_max - (yj-t * PD)
= 125℃ - (5.5℃/W * 1.5W) = 116.8℃
Rev. 02
6
October 2012
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
3. Color spectrum
Warm-White Relative Spectral Power Distribution at Ta=25℃
Relative Spectral Power Distribution
1.2
1.0
0.8
0.6
0.4
0.2
0.0
300
350
400
450
500
550
600
650
700
750
800
Wavelength(nm)
Rev. 02
7
October 2012
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
4. Power characteristic
Relative Power Distribution vs. Voltage at Ta=25℃
Relative Power Distribution
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
80
90
100
110
120
130
140
Voltage(Vac)
Relative Luminous Flux vs. Voltage at Ta=25℃
Relative Luminous flux vs. Forward Voltage, Ta=25oC
Flux
Luminous
Relative
Flux [a.u.]
Luminous
Relative
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
80
90
100
110
120
130
140
Voltage[RMS,V]
Voltage(Vac)
Rev. 02
8
October 2012
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
5. Radiation Pattern
Rev. 02
9
October 2012
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
6. Color & Binning
6-1. Warm White Ansi binning structure range 2,600K(H) to 3,200K(G)
0.44
0.43
H1
H0
0.42
G1
G0
CIEy
0.41
H3
H2
G3
G2
0.40
H4
H5
G5
0.39
G4
0.38
0.37
0.40
Bin code
G0
G3
H0
H3
0.41
0.42
0.43
Bin code
0.44
0.45
CIEx
0.46
X
Y
X
Y
0.4299
0.4165
0.4430
0.4248
0.4048
0.4374
0.4374
0.4093
0.4499
0.4138
0.4430
0.4212
0.4562
0.4374
0.4093
0.4317
0.3973
0.4436
0.4015
0.4499
0.4138
0.4562
0.4260
0.4499
0.4138
0.4620
0.4166
0.4687
0.47
0.49
X
Y
0.4212
0.4248
0.4048
0.4093
0.4198
0.3931
0.4317
0.3973
0.4260
0.4374
0.4093
0.4198
0.3931
0.4317
0.3973
0.4147
0.3814
0.4259
0.3853
0.4259
0.3853
0.4373
0.3893
0.4317
0.3973
0.4436
0.4015
0.4687
0.4289
0.4499
0.4138
0.4620
0.4166
0.4436
0.4015
0.4740
0.4194
0.4551
0.4042
0.4289
0.4810
0.4319
0.4620
0.4166
0.4620
0.4166
0.4436
0.4015
0.4551
0.4042
0.4551
0.4042
0.4373
0.3893
0.4483
0.3919
0.4666
0.4069
0.4483
0.3919
0.4593
0.3944
0.4740
0.4194
0.4551
0.4042
0.4666
0.4069
G1
G4
H1
H4
Bin code
0.48
G2
G5
H2
H5
Rev. 02
10
October 2012
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
7. Marking
XXXXXX – Year / Month/date / Production date
XXXX – LED PKG Flux Rank / Color Bin Rank
8. Outline dimensions
* Notes :
[1] All dimensions are in millimeters. (Tolerance : ±0.2)
[2] Scale : none
Rev. 02
11
October 2012
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
9. Circuit Drawing
Rev. 02
12
October 2012
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
10. Packing
๏ 1Box : 50 PCS per tray x Max 8 layer = Max 400 PCS
about 6kg
๏ Box size( L x W x H ) = 590 x 330 x 260
Rev. 02
13
October 2012
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
11. Usage precautions
• Please review the Acrich2 Module Application Note for protective circuitry
component usage.
• Please note, the Acrich products run on high voltage so use caution when near
the the device which the circuit is active.
• DO NOT touch any of the circuit board, components or terminals with body or
metal while circuit is active.
• Please do not add or change wires while Acrich circuit is active
• Long time exposure of sunlight or occasional UV exposure will cause lens
discoloration.
• Please do not use adhesives to attach the LED that outgas organic vapor.
• Please do not use together with the materials containing Sulfur
• Please do not assemble under the condition of moisture and oxidizing gas in the
air(Cl, H2S,NH3,SO2,NOX,etc)
12. Handling of silicone resin for LEDs
•
•
Acrich series is encapsulated with silicone resin for high optical efficiency.
Please do not touch the silicone resin area with sharp objects such as
pincette(tweezers).
• Finger prints on silicone resin area may affect the performance.
• Please store LEDs in covered containers as it is dust sensitive.
• Excessive force more than 3000gf to the silicone lens can result in fatal or
permanent damage with LEDs.
• Please do not cover the silicone resin area with any other resins such as
epoxy, urethane, etc.
Rev. 02
14
October 2012
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
13. Handling with regards to static electricity
• The Acrich2 modules use an integrated circuit (IC) which can be damaged
when exposed to static electricity. Please handle using equipment that
prevents static electricity. Do not touch unless ESD protection is used.
• The Acrich2 modules should also not be installed in end equipment with out
ESD protection.
14. Storage before use
• Do not impact or place pressure on this product because even a small
amount of pressure can damage the product. The product should also not be
placed in high temperatures, high humidity or direct sunlight since the device is
sensitive to these conditions.
(1) Please, confirm the lists below, when storing it in a long term.
* It should be stored in the anti-static bag that Seoul-Semiconductor packed
without opening it.
* If you opened it in order to prevent humidity, you should seal it and not let
the air and humidity into the bag.
Rev. 02
15
October 2012
www.Acrich.com