SQD45P03-12 Automotive P-Channel 30 V (D-S) 175 °C MOSFET PRODUCT SUMMARY VDS (V) - 30 RDS(on) () at VGS = - 10 V 0.010 RDS(on) () at VGS = - 4.5 V 0.024 ID (A) FEATURES • TrenchFET® Power MOSFET - 50 Configuration Single TO-252 S • Package with Low Thermal Resistance • AEC-Q101 Qualifiedd • 100 % Rg and UIS Tested • Material categorization: For definitions of compliance please see www.freescale.net.cn G Drain Connected to Tab G D S D P-Channel MOSFET Top View ORDERING INFORMATION Package TO-252 Lead (Pb)-free and Halogen-free SQD45P03-12-GE3 ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-Source Voltage VDS - 30 Gate-Source Voltage VGS ± 20 TC = 25 °Ca Continuous Drain Current Continuous Source Current (Diode TC = 125 °C Conduction)a Pulsed Drain Currentb Single Pulse Avalanche Current Single Pulse Avalanche Energy Maximum Power Dissipationb L = 0.1 mH TC = 25 °C TC = 125 °C Operating Junction and Storage Temperature Range ID V - 50 - 37 IS - 50 IDM - 200 IAS - 31 EAS 48 PD UNIT 71 23 A mJ W TJ, Tstg - 55 to + 175 °C SYMBOL LIMIT UNIT THERMAL RESISTANCE RATINGS PARAMETER Junction-to-Ambient Junction-to-Case (Drain) PCB Mountc RthJA 50 RthJC 2.1 °C/W Notes a. Package limited. b. Pulse test; pulse width 300 μs, duty cycle 2 %. c. When mounted on 1" square PCB (FR-4 material). d. Parametric verification ongoing. 1/9 www.freescale.net.cn SQD45P03-12 Automotive P-Channel 30 V (D-S) 175 °C MOSFET SPECIFICATIONS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-Source Breakdown Voltage Gate-Source Threshold Voltage Gate-Source Leakage - 30 - - - 1.5 - 2.0 - 2.5 VDS = 0 V, VGS = ± 20 V - - ± 100 - - -1 IDSS On-State Drain Currenta ID(on) Drain-Source On-State Resistancea Forward VGS = 0, ID = - 250 μA VDS = VGS, ID = - 250 μA IGSS Zero Gate Voltage Drain Current Transconductanceb VDS VGS(th) RDS(on) gfs VGS = 0 V VDS = - 30 V VGS = 0 V VDS = - 30 V, TJ = 125 °C - - - 50 VGS = 0 V VDS = - 30 V, TJ = 175 °C - - - 150 VGS = - 10 V VDS- 5 V - 50 - - VGS = - 10 V ID = - 15 A - 0.008 0.010 VGS = - 10 V ID = - 15 A, TJ = 125 °C - - 0.015 VGS = - 10 V ID = - 15 A, TJ = 175 °C - - 0.017 VGS = - 4.5 V ID = - 12 A - 0.019 0.024 - 34 - - 2794 3495 - 616 770 - 470 590 VDS = - 15 V, ID = - 17 A V nA μA A S Dynamicb Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Total Gate Chargec Qg Gate-Source Chargec Qgs Gate-Drain Chargec Qgd Gate Resistance Turn-On Delay Timec Rise Timec Turn-Off Delay Timec Fall Timec Source-Drain Diode Ratings and Rg VGS = 0 V VGS = - 10 V VDS = - 15 V, f = 1 MHz VDS = - 15 V, ID = - 45 A f = 1 MHz td(on) tr td(off) VDD = - 15 V, RL = 0.33 ID - 45 A, VGEN = - 10 V, Rg = 1 tf - 55.3 83 - 7.3 - - 14 - 1.40 2.86 4.50 - 11 16.5 pF nC - 11 16.5 - 29 43.5 - 19 28.5 - - - 200 A - - 0.9 - 1.5 V ns Characteristicsb Pulsed Currenta ISM Forward Voltage VSD IF = - 40 A, VGS = 0 Notes a. Pulse test; pulse width 300 μs, duty cycle 2 %. b. Guaranteed by design, not subject to production testing. c. Independent of operating temperature. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2/9 www.freescale.net.cn SQD45P03-12 Automotive P-Channel 30 V (D-S) 175 °C MOSFET TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 100 100 VGS = 10 V thru 6 V 80 I D - Drain Current (A) I D - Drain Current (A) 80 VGS = 5 V 60 40 VGS = 4 V 20 60 40 TC = 25 °C 20 TC = 125 °C TC = - 55 °C 0 0 0 3 6 9 12 VDS - Drain-to-Source Voltage (V) 15 0 2 4 6 8 VGS - Gate-to-Source Voltage (V) Transfer Characteristics Output Characteristics 0.05 60 TC = - 55 °C 0.04 RDS(on) - On-Resistance (Ω) gfs - Transconductance (S) 48 TC = 25 °C TC = 125 °C 36 24 VGS = 4.5 V 0.03 0.02 VGS = 10 V 0.01 12 0.00 0 0 8 16 24 ID - Drain Current (A) 32 0 40 20 40 60 80 100 ID - Drain Current (A) On-Resistance vs. Drain Current Transconductance 2.0 100 ID = 15 A 1.7 10 VGS = 10 V I S - Source Current (A) R DS(on) - On-Resistance (Normalized) 10 1.4 1.1 0.8 TJ = 150 °C 1 TJ = 25 °C 0.1 0.01 0.5 - 50 - 25 0 25 50 75 100 125 150 TJ - Junction Temperature (°C) On-Resistance vs. Junction Temperature 3/9 175 0.001 0.0 0.2 0.4 0.6 0.8 1.0 1.2 VSD - Source-to-Drain Voltage (V) Source Drain Diode Forward Voltage www.freescale.net.cn SQD45P03-12 Automotive P-Channel 30 V (D-S) 175 °C MOSFET TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 10 0.10 0.08 0.06 0.04 0.02 TJ = 150 °C TJ = 25 °C 0.00 8 VDS = 15 V 6 4 2 0 VGS - Gate-to-Source Voltage (V) 20 30 40 Qg - Total Gate Charge (nC) On-Resistance vs. Gate-to-Source Voltage Gate Charge 0 2 4 6 8 0 10 5000 1.1 4000 0.8 10 50 60 VGS(th) Variance (V) ID = 250 µA Ciss 3000 2000 Coss 1000 0.5 ID = 5 mA 0.2 - 0.1 Crss 0 0 5 10 15 20 25 V DS - Drain-to-Source Voltage (V) 30 - 0.4 - 50 - 25 0 25 50 75 100 125 150 175 TJ - Temperature (°C) Capacitance Threshold Voltage - 30 VDS - Drain-to-Source Voltage (V) C - Capacitance (pF) VGS - Gate-to-Source Voltage (V) R DS(on) - On-Resistance (Ω) ID = 45 A ID = 10 mA - 32 - 34 - 36 - 38 - 40 - 50 - 25 0 25 50 75 100 125 TJ - Junction Temperature (°C) 150 175 Drain Source Breakdown vs. Junction Temperature 4/9 www.freescale.net.cn SQD45P03-12 Automotive P-Channel 30 V (D-S) 175 °C MOSFET THERMAL RATINGS (TA = 25 °C, unless otherwise noted) IDM Limited 100 100 µs ID - Drain Current (A) Limited by RDS(on)* ID Limited 10 1 ms 10 ms 100 ms 1 s, 10 s, DC 1 0.1 TC = 25 °C Single Pulse 0.01 0.01 BVDSS Limited 0.1 1 10 100 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified Safe Operating Area 2 Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10-4 10-3 10-2 10-1 1 10 100 1000 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Ambient 5/9 www.freescale.net.cn SQD45P03-12 Automotive P-Channel 30 V (D-S) 175 °C MOSFET THERMAL RATINGS (TA = 25 °C, unless otherwise noted) 2 Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10 -4 10 -3 10 -2 10 -1 1 10 100 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Case Note • The characteristics shown in the two graphs - Normalized Transient Thermal Impedance Junction-to-Ambient (25 °C) - Normalized Transient Thermal Impedance Junction-to-Case (25 °C) are given for general guidelines only to enable the user to get a “ball park” indication of part capabilities. The data are extracted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part mounted on printed circuit board - FR4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. The part capabilities can widely vary depending on actual application parameters and operating conditions. 6/9 www.freescale.net.cn SQD45P03-12 Automotive P-Channel 30 V (D-S) 175 °C MOSFET TO-252AA CASE OUTLINE E A MILLIMETERS C1 e b1 D1 e1 E1 L gage plane height (0.5 mm) L1 b L3 H D L2 b2 C A2 A1 INCHES DIM. MIN. MAX. MIN. MAX. A 2.21 2.38 0.087 0.094 A1 0.89 1.14 0.035 0.045 A2 0.030 0.127 0.001 0.005 b 0.71 0.88 0.028 0.035 b1 0.76 1.14 0.030 0.045 b2 5.23 5.44 0.206 0.214 C 0.46 0.58 0.018 0.023 C1 0.46 0.58 0.018 0.023 D 5.97 6.22 0.235 0.245 D1 4.10 4.45 0.161 0.175 E 6.48 6.73 0.255 0.265 E1 4.49 5.50 0.177 0.217 e e1 2.28 BSC 4.57 BSC 0.090 BSC 0.180 BSC H 9.65 10.41 0.380 L 1.40 1.78 0.055 0.070 L1 0.64 1.02 0.025 0.040 L2 0.89 1.27 0.035 0.050 L3 1.15 1.52 0.040 0.060 ECN: T11-0110-Rev. L, 18-Apr-11 DWG: 5347 Note • Dimension L3 is for reference only. 7/9 www.freescale.net.cn 0.410 SQD45P03-12 Automotive P-Channel 30 V (D-S) 175 °C MOSFET RECOMMENDED MINIMUM PADS FOR DPAK (TO-252) 0.224 0.243 0.087 (2.202) 0.090 (2.286) (10.668) 0.420 (6.180) (5.690) 0.180 0.055 (4.572) (1.397) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index 8/9 Return to Index www.freescale.net.cn SQD45P03-12 Automotive P-Channel 30 V (D-S) 175 °C MOSFET Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. freestyle Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on it s or their behalf (collectively, “freestyle”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. freestyle makes no warranty, representation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain type s of applications are based on freestyle’s knowledge of typical requirements that are often placed on freestyle products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsib ility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify freestyle’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, freestyle products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the freestyle product could result in personal injury or death. Customers using or selling freestyle products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold freestyle and its distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vis hay Material Category Policy freestyle Intertechnology, Inc. hereby certi fies that all its products that are id entified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwis e specified as non-compliant. Please note that some freestyle documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002 /95/EC conform to Directive 2011/65/EU. 9/9 www.freescale.net.cn