MENB1020 Universal 20 Watt Series Medical Switch-Mode Power Supply 3 Year Warranty •100-240VAC Universal Input Range •Meets EISA2007, CEC Efficiency Level V, EU (EC) No 278/2009 Phase II •Desktop & Wall Plug Styles •5V to 48V Single Output Models, up to 20W •Modified and Custom Designs Available •Regulated Output with Low Ripple •Impact-Resistant Polycarbonate Enclosure •No load Power Consumption <0.3W •Limited Power Source •Certified to UL/EN60601-1 RoHS Specifications All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. AC Input Input Current 100-240Vac, -/-10%, 47-63 Hz, 1∅ 100Vac: 0.45A Inrush Current Input Fuse Inrush limiting provided, 60 A peak Internal Primary Current Fuse provided: 3.15A, 250Vac Efficiency Output Voltage Meets EISA2007, CEC Efficiency Level V, EU (EC) No 278/2009 Phase II See chart Output Power See chart Ripple and Noise 1% pk-pk max., 20MHz BW Line & Load Voltage Regulation Minimum Load Not required Transient Response Case Dimensions Line: +/- 1%, Load: +/-5% 500 us max, 50% load step 84 X 47 X 32mm. See outline drawing Case Material Weight MTBF 100,000 hours (calculated) Hold-up Time 18 ms min. @ 115Vac, 60 ms min. @ 230 Vac Overload Protection Hiccup Mode Short Circuit Protection Hiccup Mode Topology Switching – Fixed Frequency Flyback Safety Standards EN/IEC/CSA/UL60601-1 EMC, Radiated & Conducted Dielectric Withstand Operating Temperature Storage Temperature Relative Humidity See chart below Input-Output: 5,656VDC, Input-Ground: 1,500Vac, Output-Ground: 500Vdc 0° to 40°C, no derating -30 to +85°C 5% to 95%, non-condensing Altitude Black 94V0 Polycarbonate Turn-on Time 150g Output Cable 0 to 10,000 ft 2 sec max, 115/230 Vac 5V – 9V outputs: #18AWG (SPT-1), 1500mm, 2 conductor 12V – 48V outputs: #20AWG (UL1185), 1500mm, 2 conductor Output Connector 2.5mm barrel type (Ault #3), center contact (+) EMC Specifications Conducted Emissions Radiated Emissions Line Frequency Harmonics Voltage Fluctuations/Flicker Static Discharge Immunity Radiated RF Immunity EFT/Burst Immunity Line Surge Immunity Conducted RF Immunity Power Frequency Magnetic Field Immunity Voltage Dip Immunity EN55011 Class B, FCC Part 15, Class B. EN55011 Class B, FCC Part 15, Class B. EN61000-3-2, Class A EN61000-3-3 EN61000-4-2, 6kV Contact Discharge, 8kV air discharge EN61000-4-3, 3V/m. EN61000-4-4, 2kV/5kHz. EN61000-4-5, 1kV differential, 2kV common-mode EN61000-4-6, 3Vrms EN61000-4-8, 3A/m EN61000-4-11, Criteria A ______________________________________________________________________________________________________________________________ SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: [email protected] • www.slpower.com 1 of 2 MENB1020 Universal 20 Watt Series ITE Medical Switch Switch ModeMode Power Power Supply Supply Model Number Volts (V) 3 Year Warranty 3 Year Warranty Output Current (max) Max Watts Ripple (Vp-p max) MENB1020A0303F01 3.3 V 3.00 A 9.9 W 50 mV MENB1020A0503F01 5V 3.00 A 15.0 W 50 mV MENB1020A0603F01 6V 2.50 A 15.0 W 60 mV MENB1020A0703F01 7.5 V 2.00 A 15.0 W 75 mV MENB1020A0903F01 9V 2.00 A 18.0 W 90mV MENB1020A1203F01 12 V 1.50 A 18.0 W 120mV MENB1020A1403F01 14 V 1.20 A 16.8 W 140mV MENB1020A1503F01 15 V 1.20 A 18.0 W 150mV MENB1020A1803F01 18 V 1.00 A 18.0 W 180mV MENB1020A2403F01 24 V 0.75 A 18.0 W 240mV MENB1020A4803F01 48 V 0.40 A 19.2 W 440mV Notes: Part numbers above include #3 output connector and IEC320 C14 grounded input receptacle. See below for other options. Model Number Key MENB 1 020 A VV 03 F 01 Model Input Connector: Output Connector: Output Voltage: Model Output Pow er: # of Outputs Product Fam ily: "01" = Standard. "02" and higher indicates a m odified m odel. "F" = IEC320 C14 grounded, Other options available, see below "03" = 2.5m m Barrel Type Connector. Other options available, contact factory. "05" = 5Vdc, "12" = 12Vdc, "24" = 24Vdc, etc. "A" = Original Configuration "020" = 20 Watts "1" = Single Output "M" = Medical, "E" = External, "NB" = Model Series Designator AC Input Receptacle Options Desktop IEC320 - C14 Class I Grounded IEC320 - C18 Class II Ungro unde d IEC320 - C8 Class II "Shaver" (F) (Q) (N) Notes: Output Connector Wall-Plug N. Am erica Japan N. Am erica Japan Int e rc ha nga ble Fixed (B) (C) Europe Australia Fixed United Kingdom Fixed (M) (G) (H) Fixed 1. For desktop options, choose applicable letter above. Notes: 2. For Wall-Plug options, choose the applicable letter above and the unit w ill be fitted w ith the receptacle chosen. The N. A. blade version (B) w ill be an interchangeable blade. The other options (C), (M), (G), and (H) w ill be fixed blades m olded in the case. 3. Blade Kit is available w hich w ill include one each of a EU, UK, and Australian blade. Kit part # is KT1027K. These can be used w ith the (B) version, to allow blades to be changed. 1. Ault #3 Connector, center contact (+). 2. Connector is Sw itchcraft 760 plug or equivalent. Mating connector is Sw itchcraft 712A or equivalent. 3. Other connector options are available. Contact your local SL Pow er Representative for details. Outline Drawing DATE CODE DATE CODE Desktop Style Wall-plug Style (Option “B” shown) Data Sheet © 2010 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 12-22-2010 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. ______________________________________________________________________________________________________________________________ SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: [email protected] • www.slpower.com 2 of 2