MINT1110A 110W Single Output Series Medical – Universal Input Power Supply 2 Year Warranty •110W Convection Cooled AC-DC Power Supply •Universal Input 90-264 VAC •Less than 1.27” Height •Rugged EMC Compliant Design •3” x 5” Package •Approved to EN/IEC/UL60601-1 for Medical • Compliant (LVD, RoHS) Specifications All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. AC Input 100-240VAC +/- 10%, 47-63 Hz single phase. Input Current 115VAC: 1.4A. Inrush Current The inrush at 264VAC, at a cold start, will not exceed 40A. Input Fuses F1, F2: 2.5A, 250VAC fuses provided on all models. Power Factor Complies with EN61000-3-2. Efficiency 87% typical. Output Power 90 - 110W continuous. Ripple and Noise 1% pk-pk max., 20MHz BW, differential mode. Measured with noise probe directly across output terminals. Output Voltage See chart. Minimum Load Not required. Total Regulation See chart. Transient Response 500µs max., 50% load step, typical. Turn On Time Less than 2 seconds under all rated load conditions. Hold-up Time 16 ms at 110W, nominal input (120VAC). Overvoltage Protection See chart for levels, latching type Overload Protection Hiccup Mode Short Circuit Protection Hiccup Mode Overtemperature Protection Provided on all models. Medical Safety Standards EN/IEC/UL 60601-1, CSA22.2, No. 601.1 Isolation Input-Output: 4000VAC, Input-Ground: 1500VAC, Output-Ground: 500VDC Earth Leakage Current <130µA at 264Vac, 60Hz. Operating Temperature 0° to 70°C (derate from full rated power above 40°C) Output Power Derating Derate Output Power by 2.5% per °C above 40°C, up to 70°C max. Storage Temperature -40 to +85°C. Relative Humidity 5% to 95%, non-condensing 1 of 3 ______________________________________________________________________________________________________________________________ SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: [email protected] • www.slpower.com MINT1110A 110W Single Output Series Medical – Universal Input Power Supply 2 Year Warranty Output Parameters Model Number Volts (V) Output Current Ripple & Noise Total Regulation MINT1110A1208K01 12V 7.5A 120mV ±2% OVP Threshold Initial Setpoint Tolerance 15.0 ± 1V ±1% MINT1110A1508K01 15V 6.5A 150mV ±2% 18.0 ± 1V ±1% MINT1110A1808K01 18V 5.8A 180mV ±2% 23.0 ± 1V ±1% MINT1110A2408K01 24V 4.6A 240mV ±2% 28.0 ± 1V ±1% Specifications (continued) Vibration Operating: 0.003 g2/Hz, 1.5 grms overall, 3 axes, 10 min. / axis Non-Operating: 0.026 g2/Hz, 5.0 grms overall, 3 axes, 1 hr. / axis Enclosure Dimensions See outline drawing. Weight 372 grams Shock Operating: Half-sine, 20 gpk, 10 ms, 3 axes, 6 shocks total Non-Operating: Half-sine, 40 gpk, 10 ms, 3 axes, 6 shocks total Operating Altitude -500 to 10,000 ft. Non-operating Altitude -500 to 40,000 ft. EMI/EMC Compliance Conducted Emissions EN55011 Class B, FCC Part 15, Class B. Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge Radiated RF Immunity EN61000-4-3, 10V/m. EFT/Burst Immunity EN61000-4-4, 2kV/5kHz.. Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m Voltage Dip Immunity EN61000-4-11 240VAC, 0%/0.5 cycle, 40%/5cycles, 70%/25 cycles EN61000-3-2, Class A Line Frequency Harmonics Model Number Key MINT 1 110 A 12 08 K 01 01 = Standard Configuration. 02 and higher indicate modified model. Input Connector Output Connector Output Voltage Model Configuration Output Power (Watts) # of Outputs Product Family: "M" = Medical, "I" = Internal, "NT" = New Technology 2 of 3 ______________________________________________________________________________________________________________________________ SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: [email protected] • www.slpower.com MINT1110A 110W Single Output Series Medical – Universal Input Power Supply 2 Year Warranty Outline Drawing INPUT CONNECTOR: LANDWIN 3361P03E3TSN02 J1 PIN 1) AC LINE PIN 2) AC NEUTRAL OUTPUT CONNECTOR: LANDWIN P/N 3361P08E3T J2 PIN 1) PIN 2) PIN 3) PIN 4) P1 P2 +Vout +Vout +Vout +Vout PIN 5) PIN 6) PIN 7) PIN 8) -Vout -Vout -Vout -Vout MATING CONNECTORS: AMP P/N MTA-156-3P AMP P/N MTA-156-8P GROUND CONNECTION 0.250" FASTON TAB Data Sheet © 2010 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 5/24/2010 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. 3 of 3 ______________________________________________________________________________________________________________________________ SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: [email protected] • www.slpower.com