PW132 ITE 101 WATT SERIES PW132 SWITCH-MODE P O W E R S U P P LY PW132 Ault Part No. Voltage DC Max Amps Max Watts • 100-240 VAC Universal Input PW132RA1251F01 12V 8.15 98 • Desktop Style PW132RA1551F01 15V 6.5 97.5 • Single Output to 101W PW132RA2403F01 24V 4.21 101 • Regulated Output With Low Ripple PW132RA4803F01 48V 2.08 101 • Meets Safety Agency Requirements • Complies With EMI/RFI Regulations • CE Compliant • Impact Resistant Polycarbonate Enclosure • Private Label Marking Available • 1 Year Warranty • Modified and Custom Designs Also Available Ault AultPart PartNo. No.Key Key PW132 R A 12 51 F 01 Product Family Name Design Revision Changes Voltage DC Connector #51 - standard on 12V and 15V models; connector #3 standard on the 24V and 48V models Input Configuration/ Model Type (see pg. 2) Standard (no modifications, special artwork or special packaging) Manufacturing Location (volume dependent) A U LT I N C O R P O R AT E D 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL [email protected] | WEB www.aultinc.com © Copyright 2005 Ault Inc. PW132 ITE 101 WATT SERIES Input Electrical Rated Voltage 100-240 VAC -10%, +6% Line Frequency 47 - 63 Hz Current Protection Dielectric Withstand 3000 VAC, 4250 VDC primary-secondary 1500 VAC, 2150 VDC primary-ground 500 VDC secondary-ground 2.2 A max. at 90 VAC input Spacing 6.4mm primary-secondary Internal primary current fuse, Inrush limiting Efficiency 85%Typical EMI Complies with EMC Directives CE CE Compliant MTBF Min. 100,000 Hours Output Combined Line and Load Voltage Regulation ±1% excluding cord Ripple 1% V p-p max Environmental Transient Response 0.5 msec. for 50% load change typical Operating Temperature 0º to 40º C with no derating Holdup Time 20 msec min. over entire input range Storage Temperature -30º to +85º C Protection Overcurrent protection Short circuit protection Optional overvoltage crowbar Relative Humidity 5% to 95% non-condensing Altitude 0-10,000 feet Ault #51 connector standard on 12V and 15V models; Ault #3 connector standard on 24V and 48V models. Other cable options available. Cooling Convectional - non vented case Cord and Connector Mechanical Case and Dimensions Safety Approvals Agency Listings cULus60950, TUV/IEC EN60950 Input Configuration 9.0L x 2.9W x 2.0H (in) 229L x 74W x 51H (mm) Case Material Black 94V0 polycarbonate Weight 24 ounces, 684 grams (excluding cord) Connector IEC320 w/ground C14 (F) Pinout Code Center contact: positive Description Switchcraft 760 plug or equivalent Suggested Mating Switchcraft 712A jack or equivalent Other Connectors are available by special order Pinout Code Molded Mini Fit Receptacle Description Overmolded by Ault 6 pos, Molex 39-012060 max. wire 18AWG or equivalent Suggested Mating Plug Molex 39-01-2060 or 3063 Other Connectors are available by special order A U LT I N C O R P O R AT E D 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL [email protected] | WEB www.aultinc.com © Copyright 2005 Ault Inc.