PW160 I T E 1 5 - 4 8 W AT T S E R I E S PW160 SWITCH-MODE P O W E R S U P P LY PW160 Voltage DC Ault Part No. Max Amps Max Watts • 100-250 VAC Input PW160XA0303F01 3V 5.00 15.0 • Desktop Style PW160XA0503F01 5V 5.00 25.0 • Single Output Up to 48W PW160XA0703F01 7V 5.00 35.0 • Regulated Output With Low Ripple PW160XA0903F01 9V 4.60 42.0 • Meets Safety Agency Requirements PW160XA1203F01 12V 3.50 42.0 • Complies With EMI/RFI Regulations PW160XA1503F01 15V 3.00 45.0 CE Compliant PW160XA1603F01 16V 2.80 45.0 • PW160XA1803F01 18V 2.50 45.0 • Impact Resistant Polycarbonate Enclosure PW160XA2403F01 24V 2.00 48.0 • Private Label Marking Available PW160XA4803F01 48V 1.00 48.0 • 3 Year Warranty • Modified and Custom Designs Also Available Ault AultPart PartNo. No.Key Key • Manufactured in Korea/China PW160 X A 05 03 __ 01 Product Family Name Design Revision Changes Voltage DC Connector Input Configuration/ Model Type (see pg. 2) Denotes standard or custom requirements Manufacturing Location (volume dependent) A U LT I N C O R P O R AT E D 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL [email protected] | WEB www.aultinc.com © Copyright 2002 Ault Inc. PW160 I T E 1 5 - 4 8 W AT T S E R I E S Input Electrical Voltage 100-250 VAC -10%, +6% Topology Switching-fixed frequency flyback Line Frequency 47 - 63 Hz Leakage Current Less than 0.75mA at 265VAC 50 Hz Current 1.2 A max at 90VAC input Efficiency 78% Min, 70% for 3V,5V Protection Internal primary current fuse, Inrush limiting EMI Complies with EMC Directives MTBF 100,000 Calculated Hours Output Environmental Combined Line, Load and Cross Regulation +/-1% (excluding cord) Ripple 1% Vp-p max for output current of > 0.175A Transient Response 0.5msec. for 50% load change typical Holdup Time 18 msec min @ 120VAC 80 msec min @ 240VAC Protection Overcurrent protection Short circuit protection Mechanical Cord and Connector (3V, 5V, and 7V model with 3.2 ft. cord, other models with 6 ft. cord) 2 conductor, 18 AWG, Ault #3 connector. Requires overmolded ferrite core. Other connectors are also available Safety Approvals Agency Listings Operating Temperature 0º to 40º C with no derating Storage Temperature -30º to +85º C Relative Humidity 5% to 95% non-condensing Altitude 0-10,000 feet Cooling Convectional - non vented case Case and Dimensions 4.20L x 2.60W x 1.46H (in) 107L x 66W x 37H (mm) Case Material 94V0 polycarbonate; black is standard color; other colors available - extra charges may apply Weight 10 ounces, 285 grams (excluding cord) TUV/IEC EN60950, cULus 60950, Australian, Japanese certification available – extra fees apply Input Configuration Connector IEC320 w/ground C14 (F) In Case IEC320 type with ground Pinout Code Center contact: positive Description Switchcraft 760 plug or equivalent Suggested Mating Switchcraft 712A jack or equivalent Other Connectors are available by special order A U LT I N C O R P O R AT E D 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL [email protected] | WEB www.aultinc.com © Copyright 2002 Ault Inc.