SOURCE T-11-155-D3-SMU

155Mbps PIN-TIA Receiver Modules-ROSA(3.3V)
T-11-155-D3-Sxx
Features
• InGaAs/InP PIN Photodiode with transimpedance amplifier
• High sensitivity with AGC*
• Differential ended output
• Single +3.3V operation
• -40 to +85ºC operating temperature
• SC/LC/MU ROSA package
• ATM 155Mbps receiver/transceiver application
• Fast Ethernet receiver/transceiver application
Absolute Maximum Rating (Tc=25ºC )
Parameter
Symbol
Value
Supply Voltage
VCC
4.5
Unit
V
Operating Temperature
Topr
-40 to +85
ºC
Storage Temperature
Tstg
-40 to +85
ºC
DC Electrical Characteristics( Tc=25ºC )
Parameter
Symbol
Min
Typical
Max
Unit
Power Supply
VCC
3.0
3.3
3.6
V
Differential Output Voltage
Vd
-
-
1
V
Supply Current (no load)
ICC
-
-
35
mA
Min
Typical
Max
Unit
(Operating at Vcc=3.3V , Tc=25ºC, RL=1000Ω, λ=1310nm, 9/125µm SM fiber)
AC/Optical and Electrical Characteristics( Tc=25ºC )
Parameter
Symbol
Detection Range
Test Condition
1100
1310
1650
nm
-
G
52
-
70
V/mW
λ=1310nm
Bandwidth
BW
120
140
-
MHz
-
Saturation Power
Psat
-3
0
-
dBm
λ=1310nm
Sensitivity
Sens
-
-38
-35
dBm
BER=10-10 @155Mbps
Output Resistance
Rout
-
50
65
ohm
-
Gain @ 10Mbps Differential
Connector Options
Model
Package
Fiber
Connector
T-11-155-D3-SSC
ROSA
-
SC
T-11-155-D3-SLC
ROSA
-
LC
T-11-155-D3-SMU
ROSA
-
MU
1
155Mbps PIN-TIA Receiver Modules-ROSA(3.3V)
T-11-155-D3-Sxx
Pin Assignment
Pin assignment
1~Vc c
2~D out
3~D out
4~GND(CASE)
Outline Drawing
155Mbps PIN-TIA Receiver Modules-ROSA (3.3V)
Units in mm
2
155Mbps PIN-TIA Receiver Modules-ROSA(3.3V)
T-11-155-D3-Sxx
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow
guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Legal Notice
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at Luminentʼs sole and absolute discretion. Luminent warrants performance of its
products to current specifications only in accordance with the companyʼs standard one-year warranty; however, specifications designated as “preliminary” are given to
describe components only, and Luminent expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties
of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the companyʼs Terms and Conditions of Sale for further
warranty information.
Luminent assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property
described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and Luminent makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT
intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. Luminent customers using or selling
products for use in such applications do so at their own risk and agree to fully defend and indemnify Luminent for any damages resulting from such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that Luminent is not liable for any actual,
consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact Luminent to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current.
© Luminent, Inc. 2003
All rights reserved
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 • LUMINENT.COM
3
LUMNDS547-0803