SPECTRUM SF0983BA032880S

SF0983BA03280S
SAW Filter
983.04 MHz SAW Bandpass Filter, 0.51 MHz 1 dB Bandwidth
• 3.8 x 3.8 mm Ceramic LCC, 8 Pads
• RoHS Compliant
These filters are manufactured on quartz, which provides optimal temperature performance and are available from 80
-1600 MHz. This TCRF is designed for narrowband IF filtering such as in satellite transponders, directional finders and
anti-jam modems. Other packaging styles are available for more rugged environments and applications. Standard part
numbers as well as custom solutions are available. Please contact sales for more information.
TYPICAL PERFORMANCE
Center = 983 MHz, 1 MHz/div (6.3 kHz incr)
8/2012
Center = 983 MHz, 5 MHz/div (31.3 kHz incr)
SPECIFICATION
Parameter
Center Frequency, (Fc)
Minimum Insertion Loss
Absolute Delay
Amplitude Ripple (982.79-983.29 MHz)
1 dB Bandwidth 2
3 dB Bandwidth 2
20 dB Bandwidth 2
Relative Attenuation (800-980 MHz) 2
Relative Attenuation (986-1100 MHz) 2
Turnover Temperature (Tref) 3
Temperature Coefficient of Frequency (Tc) 3
Source and Load Impedance
Ambient Temperature (Tref)
1
Notes:
Min
Typ
Max
Units
500
30
25
-
983.04
7
1.3
1
510
700
1.25
55
55
25
-0.032
50
25
8
3
900
-
MHz
dB
µs
dB
kHz
kHz
MHz
dB
dB
°C
ppm/°C2
ohm
°C
-
-
1. Reference frequency. Computed as mean of the 1 dB frequencies.
2. All dB values are referenced to the insertion loss value.
3. Typical shift of frequency response with temperature is: Δf = (T-Tref)2*Tc*Fc
MAXIMUM RATINGS
Parameter
Min
Max
Units
Storage Temperature Range
Operating Temperature Range
Input Power Level
-40
-40
-
85
85
+13
°C
°C
dBm
MATCHING CIRCUIT
Notes:
•
Recommend 2% or better tolerance matching components. Typical inductor Q=45.
•
Optimum values may change depending on board layout. Values shown are intended as a guide only.
8/2012
PACKAGE OUTLINE
Units: mm
Tolerances are ± 0.15 mm except
where indicated.
Pad Configuration:
Input:
2
Output:
6
Ground:
All other pads
Package Material:
Body: Al2O3 ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 1 µm
min, over a 1.3 - 8.9 µm Ni plating
+1 888.553.7531
apitech.com/microwave
+1 855.294.3800
www.apitech.com
8/2012