TMPG06-6.8/A THRU TMPG06-43/A Automotive Transient Voltage Suppressors 6.8V-43V 1.0mA-10mA FEATURES • Patented PAR® construction • Available in Unidirectional polarity only • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Typical ID less than 1.0 µA above 10 V rating • Solder Dip 260 °C, 40 seconds • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC MECHANICAL DATA Case: MPG06, molded epoxy over passivated junction Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: Color band denotes cathode end MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak power dissipation with a 10/1000 µs waveform (1) (Fig. 1) Peak pulse current with a 10/1000 µs waveform (1,2) SYMBOL LIMIT UNIT PPPM Minimum 400 W IPPM see next table A PD 1.0 W (Fig. 3) Power dissipation on infinite heatsink at TL = 75 °C (Fig. 5) Peak forward surge current 8.3 ms single half sine-wave (2) IFSM 40 A Maximum instantaneous forward voltage at 25 A (2) VF 3.5 V Operating junction and storage temperature range TJ, TSTG - 65 to + 185 °C Note: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2 (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum E-mail: [email protected] 1 of 3 Web Site: www.taychipst.com TMPG06-6.8/A THRU TMPG06-43/A 6.8V-43V 1.0mA-10mA Automotive Transient Voltage Suppressors ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) MAXIMUM BREAKDOWN DEVICE TYPE TMPG06-6.8 TMPG06-6.8A TMPG06-7.5 TMPG06-7.5A TMPG06-8.2 TMPG06-8.2A TMPG06-9.1 TMPG06-9.1A TMPG06-10 TMPG06-10A TMPG06-11 TMPG06-11A TMPG06-12 TMPG06-12A TMPG06-13 TMPG06-13A TMPG06-15 TMPG06-15A TMPG06-16 TMPG06-16A TMPG06-18 TMPG06-18A TMPG06-20 TMPG06-20A TMPG06-22 TMPG06-22A TMPG06-24 TMPG06-24A TMPG06-27 TMPG06-27A TMPG06-30 TMPG06-30A TMPG06-33 TMPG06-33A TMPG06-36 TMPG06-36A TMPG06-39 TMPG06-39A TMPG06-43 TMPG06-43A VOLTAGE V(BR) (1) AT IT (V) MIN MAX 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.3 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 STANDOFF TEST CURRENT VOLTAGE IT (mA) VWM (V) 10.0 10.0 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.0 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 MAXIMUM REVERSE LEAKAGE AT VWM ID (µA) REVERSE LEAKAGE AT VWM TJ = 150 °C ID (µA) PEAK PULSE CURRENT 300 300 150 150 50.0 50.0 10.0 10.0 5.0 5.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1000 1000 500 500 200 200 50.0 50.0 20.0 20.0 10.0 10.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT LPPM VC (Volts) MAXIMUM TEMP. COEFFICIENT OF V(BR) (%/°C) 27.8 28.6 25.6 26.5 24.0 24.8 21.7 22.4 26.7 27.6 24.7 25.6 23.1 24.0 21.1 22.0 18.2 18.9 17.0 17.8 15.1 15.9 13.7 14.4 12.5 13.1 11.5 12.0 10.2 10.7 9.2 9.7 8.4 8.8 7.7 8.0 7.1 7.4 6.5 6.7 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.5 29.1 27.7 31.9 30.6 34.2 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 0.057 0.057 0.060 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.076 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 Note: (1) Pulse test: tp ≤ 50 ms (2) Surge current waveform per Fig. 3 and derated per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 E-mail: [email protected] 2 of 3 Web Site: www.taychipst.com TMPG06-6.8/A THRU TMPG06-43/A 6.8V-43V 1.0mA-10mA Automotive Transient Voltage Suppressors RATINGS AND CHARACTERISTIC CURVES TMPG06-6.8/A 150 100 Non-repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) THRU TMPG06-43/A 10 TMPG06-10 - TMPG06-43A 1.0 TMPG06-6.8 - TMPG06-9.1A Tj = 25 °C Pulse Width (td) is defined as the point where the peak current decays to 50 % of IPPM tr = 10 µsec. Peak Value IPPM 100 Half Value - IPP 2 IPPM 50 10/1000 µsec. Waveform as defined by R.E.A. td 0 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 2.0 3.0 t - Time (ms) Figure 1. Peak Pulse Power Rating Curve Figure 3. Pulse Waveform 100 4.0 10000 75 50 25 Tj = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Measured at Zero Bias 1000 100 Measured at Stand-off Voltage VWM 10 0 0 25 50 75 100 125 150 175 1.0 200 10 100 Tj - Initial Temperature (°C) V(BR) - Breakdown Voltage (V) Figure 2. Pulse Power or Current versus Initial Junction Temperature Figure 4. Typical Junction Capacitance 1.00 200 100 60 Hz Resistive or Inductive Load Tj = 75 °C 8.3 ms Single Half Sine-Wave Peak Forward Surge Current (A) PD, Power Dissipation (W) 1.0 0 td - Pulse Width (sec.) CJ, Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % 0.1 0.1 µs 0.75 0.50 L = 0.375" (9.5 mm) Lead Lengths 0.25 0 10 0 25 50 75 100 125 150 175 1 200 10 100 TL - Lead Temperature (°C) Number of Cycles at 60 Hz Figure 5. Power Derating Curve Figure 6. Maximum Non-Repetitive Forward Surge Current E-mail: [email protected] 3 of 3 Web Site: www.taychipst.com