TQP879001A 2.4GHz WLAN LNA+ SP3T Switch Applications 802.11b/g/n WLAN applications WLAN systems Portable battery powered equipment Product Features Package Description 2.4GHz WLAN by-passable LNA cascaded with low loss SP3T switch Temperature compensated bias network Single battery voltage of 3.0V to 3.6V General Description 1.5mm x 1.5mm x 0.55mm ETSLP-12 Lead-free, Halogen-free, MSL-1 package Pin Configuration The TQP879001A is a fully-integrated LNA + SP3T switch in an ultra-small 1.5mm x 1.5mm x 0.55mm footprint package for 802.11b/g/n + BT applications. The TQP879001A contains by-passable LNA, SP3T switch, and associated bias networks. The architecture and interface are optimized for next generation WLAN devices. The FEM features CMOS compatible control voltages to facilitate ease of use. With its low noise figure and low power dissipation, the FEM contributes to the extended battery life of next generation WLAN solutions. The TQP879001A is manufactured in TriQuint’s high-reliability E/D pHEMT technology and is assembled in a 1.5mm x 1.5mm x 0.55mm leadless package. Pin Number/Name 1 2 3 4 5 6 VC1 ANT VC3 TX SW_OUT GND Pin Number/Name 7 GND 8 RX 9 GND 10 VDD 11 VC2 12 BT Center Paddle GND Ordering Information Part No. Description TQP879001A 2.4GHz WLAN LNA + SP3T Switch Standard T/R size = 5000 pieces per reel. Data Sheet: Rev E 12/05/2012 © 2012 TriQuint Semiconductor, Inc. -1- Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network®r