Product specification P6KE120 A DO-15 Features 600W Peak Pulse Power Dissipation Voltage Range 33.3V Constructed with Glass Passivated Die Uni- and Bidirectional Versions Available Excellent Clamping Capability Fast Response Time Dimensions in inches and (millimeters) Absolute Maximum Ratings Ta = 25 Symbol Rating Unit Peak Power Dissipation, tp = 1.0 ms *1 Parameter PPK 600 W Steady State Power Dissipation at TL = 75 Lead Lengths 9.5 mm (Mounted on Copper Land Area of 40mm ) PD 5.0 W IFSM 100 A Peak Forward Surge Current, 8.3 ms Single Half Sine Wave, Superimposed on Rated Load (JEDEC Method) *2 Forward Voltage @ IF = 35A 300 VBR 200V s Square Wave Pulse, Unidirectional Only VBR 3.5 VF V 5.0 200V TJ.TSTG Operating and Storage Temperature Range -55 to +175 *1 Non repetitive current pulse, derated above TA = 25 *2 Duty Cycle = 4 pulses per minute maximum Electrical Characteristics Ta = 25 Type Number Reverse Standoff Voltage (Uni) VRWM(V) Min(V) P6KE120A 102 114 *3ForbidirectionaldeviceshavingV Breakdown Voltage VBR @ IT R Nom(V) 120 Max(V) 126 Test Current Max Reverse Leakage*3 @ VR Max Clamping Voltage @ Ipp Max Peak Pulse Current IT( mA) IR( A) VC(V) IPP(A) 1 5 165 3.6 of 10 V and under, the IR limit is doubled. ■ Marking Marking P6KE120A http://www.twtysemi.com [email protected] 4008-318-123 1 of 3 Product specification P6KE120 A Typlacl Characteristics 100 Peak Value Ipp CT, CAPACITANCE (pF) IP, PEAK PULSE CURRENT (%pp) 10,000 Half Value Ipp/2 50 tp Measured at Zero Bias 1000 0 1 2 Measured at Stand-off Voltage 100 10 X 1000 Waveform as defined by R.E.A. 0 Tj = 25°C f = 1.0 MHz Vsig = 50mV p-p 10 1 3 10 100 1000 VRWM, REVERSE STANDOFF VOLTAGE (V) Fig. 2 Typical Total Capacitance t, TIME (ms) Fig. 1 Pulse Waveform PP, PEAK PULSE POWER (kW) 100 IMPULSE 10 1.0 TC = 25°C 0.1 1.0 10 100 75 50 25 10 X 1000 Waveform as defined by REA 1000 100 Pd , STEADY STATE POWER DISSIPATION (W) PEAK PULSE DERATING (% PEAK PWR OR CURRENT) 0.1 10000 5.0 Single Phase Half-Wave 60Hz Resistive or Inductive Load 3.75 2.5 L = 9.5 mm 1.25 40 x 40 x 1 mm Cu 0 0 0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE (°C) Fig. 4 Pulse Derating Curve http://www.twtysemi.com [email protected] 0 25 50 75 100 125 150 175 200 TL , LEAD TEMPERATURE (°C) Fig. 5, Steady State Power Derating 4008-318-123 2 of 3 Product specification IFSM, PEAK FORWARD SURGE CURRENT (A) P6KE120 A 1000 100 10 8.3 mS Single Half Sine-Wave JEDEC Method 0 1 10 100 200 NUMBER OF CYCLES AT 60Hz Fig. 6 Peak Forward Surge Current vs. Number of Cycles at 60Hz http://www.twtysemi.com [email protected] 4008-318-123 3 of 3