Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Germin KrG | Modular disconnect test terminals | 4 mm² General ordering data Order No. Part designation Version EAN Qty. Product notes Note, technical data Function Note, accessories 0254120000 SAKT 4/LT O.STB Disconnect and modular disconnect terminal, 4 mm², Screw connection, KrG, Medium yellow, TS 32 4008190130138 50 pc(s). Two conductors with the same cross-section can be accommodated. 1.5 mm² solid and 0.5...1.5 mm² flexible Without StB To safe the test sockets use the SDIZ-blade (see chapter Tools) or bits with pilots! Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of identical terminals No. of levels No. of terminal strips per level Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version Medium yellow on side Yes No TS 32 KrG No 1 1 2 right - 50 °C, + 130 °C SAK Series Screwed Snap-on 5VA Test-disconnect terminals CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) 300 V 20 A AWG 26 -1- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Germin KrG | Modular disconnect test terminals | 4 mm² CSA rating data Max. cross-section (CSA) AWG 10 Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) 0.5 mm² 4 mm² Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection 2nd type of connection Connection direction No. of connections Stripping length Clamping screw Blade size Tightening torque range Torque level with DMS electric screwdriver Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) AWG conductor size, min. AWG conductor size, max. AWG conductor size, min. AWG conductor size, max. 0.13 mm² 6 mm² Screw connection screwed on side 2 10 mm M 2.5 0.6 x 3.5 mm 0.4...0.7 Nm 1 A3 0.5 mm² 6 mm² 1.5 mm² 4 mm² 0.5 mm² 4 mm² 0.5 mm² 4 mm² AWG 26 AWG 10 0.13 mm² 5.26 mm² Dimensions Width Height of lowest version Length TS 32 offset 8 mm 42.5 mm 57.2 mm 28.5 mm Disconnect terminals Cross-disconnect Integral test socket Slitting Torque level with DMS electric screwdriver without No sliding 1 Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current Standards 4 mm² 400 V 6 kV 32 A IEC 60947-7-1 -2- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Germin KrG | Modular disconnect test terminals | 4 mm² Rating data Current with max. conductor Pollution severity 41 A 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 300 V 20 A AWG 22 AWG 12 Approvals Approvals institutes Classifications ETIM 2.0 ETIM 3.0 eClass 4.1 eClass 5.0 eClass 5.1 EC000902 EC000902 27-14-11-26 27-14-11-26 27-14-11-26 Similar products Order No. 0310320000 Part designation SAKT 4/LT STB2.0 Version Disconnect and modular disconnect terminal, 4 mm², Screw connection, KrG, Medium yellow, TS 32 -3-