LM4857 Stereo 1.2W Audio Sub-system with 3D Enhancement General Description Key Specifications The LM4857 is an integrated audio sub-system designed for stereo cell phone applications. Operating on a 3.3V supply, it combines a stereo speaker amplifier delivering 495mW per channel into an 8Ω load, a stereo headphone amplifier delivering 33mW per channel into a 32Ω load, a mono earpiece amplifier delivering 43mW into a 32Ω load, and a line output for an external powered handsfree speaker. It integrates the audio amplifiers, volume control, mixer, power management control, and National 3D enhancement all into a single package. In addition, the LM4857 routes and mixes the stereo and mono inputs into 16 distinct output modes. The LM4857 is controlled through an I2C compatible interface. Other features include an ultra-low current shutdown mode and thermal shutdown protection. Boomer audio power amplifiers are designed specifically to provide high quality output power with a minimal amount of external components. The LM4857 is available in a 30-bump ITL package and a 28–lead LLP package. j POUT, Stereo Loudspeakers, 4Ω, 5V, 1% THD+N (LM4857SP) 1.6W (typ) j POUT, Stereo Loudspeakers, 8Ω, 5V, 1% THD+N 1.2W (typ) j POUT, Stereo Headphones, 32Ω, 5V, 1% THD+N 75mW (typ) j POUT, Mono Earpiece, 32Ω, 5V, 1% THD+N 100mW (typ) j POUT, Stereo Loudspeakers, 8Ω, 3.3V, 1% THD+N 495mW (typ) j POUT, Stereo Headphones, 32Ω, 3.3V, 1% THD+N 33mW (typ) j POUT, Mono Earpiece, 32Ω, 3.3V, 1% THD+N j Shutdown Current 43mW (typ) 0.06µA (typ) Features n n n n n n n n n n n n Stereo speaker amplifier Stereo headphone amplifier Mono earpiece amplifier Mono Line Output for external handsfree carkit Independent Left, Right, and Mono volume controls National 3D enhancement I2C compatible interface Ultra low shutdown current Click and Pop Suppression circuit 16 distinct output modes Thermal Shutdown Protection Available in micro SMD and LLP packages Applications n n n n n Cell Phones PDAs Portable Gaming Devices Internet Appliances Portable DVD/CD/AAC/MP3 players Boomer ® is a registered trademark of National Semiconductor Corporation. © 2005 National Semiconductor Corporation DS200797 www.national.com LM4857 Stereo 1.2W Audio Sub-system with 3D Enhancement June 2005 LM4857 Typical Application 20079708 FIGURE 1. Typical Audio Amplifier Application Circuit www.national.com 2 LM4857 Connection Diagrams 30 Bump ITL Package micro SMD Marking 200797I3 Top View X — Date Code T — Die Traceability G — Boomer Family C2 — LM4857ITL 200797A9 Top View (Bump-side down) Order Number LM4857ITL See NS Package Number TLA30CZA Pin Connection (ITL) Pin A1 Name Pin Description RLS+ Right Loudspeaker Positive Output A2 VDD Power Supply A3 SDA Data A4 RHP3D Right Headphone 3D A5 RHP Right Headphone Output B1 GND Ground B2 I2CVDD I2C Interface Power Supply B3 ADR I2C Address Select B4 LHP3D Left Headphone 3D B5 VDD Power Supply C1 RLS- Right Loudspeaker Negative Output C2 NC No Connect C3 SCL Clock C4 LINEOUT Mono Line Output C5 GND Ground D1 LLS- Left Loudspeaker Negative Output D2 VDD Power Supply D3 MIN Mono Input D4 NC No Connect D5 EP+ Mono Earpiece Positive Output E1 GND Ground E2 BYPASS Half-supply bypass E3 LLS3D Left Loudspeaker 3D E4 RIN Right Stereo Input E5 EP- Mono Earpiece Negative Output F1 LLS+ Left Loudspeaker Positive Output F2 VDD Power Supply F3 RLS3D Right Loudspeaker 3D F4 LIN Left Stereo Input F5 LHP Left Headphone Output 3 www.national.com LM4857 Connection Diagram 28 – Lead SP Package 20079799 Top View Order Number LM4857SP See NS Package Number SPA28A www.national.com 4 LM4857 Pin Connection (SP) Pin 1 Name Pin Description RHP Right Headphone Output 2 VDD Power Supply 3 LINEOUT Mono Line Output 4 GND Ground 5 EP- Mono Earpiece Negative Output 6 EP+ Mono Earpiece Positive Output 7 LHP Left Headphone Output 8 RIN Right Stereo Input 9 LIN Left Stereo Input 10 MIN Mono Input 11 LLS3D Left Loudspeaker 3D 12 RLS3D Right Loudspeaker 3D 13 BYPASS Half-supply bypass 14 VDD Power Supply 15 LLS+ Left Loudspeaker Positive Output 16 GND Ground 17 LLS- Leftt Loudspeaker Negative Output 18 VDD Power Supply 19 RLS- Right Loudspeaker Negative Output 20 GND Ground 21 RLS+ Right Loudspeaker Positive Output 22 VDD Power Supply 23 I2CVDD I2C Interface Power Supply 24 SDA Data 25 ADR I2C Address Select 26 SCL Clock 27 RHP3D Right Headphone 3D 28 LHP3D Left Headphone 3D 5 www.national.com LM4857 Absolute Maximum Ratings (Notes 1, 2) θJA (TLA30CZA) (Note 10) 62˚C/W If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. θJA (SPA28A) (Note 12) 42˚C/W Supply Voltage θJC (SPA28A) 6.0V Storage Temperature Input Voltage 3˚C/W Operating Ratings −65˚C to +150˚C Temperature Range −0.3V to VDD +0.3V TMIN ≤ TA ≤ TMAX −40˚C ≤ TA ≤ +85˚C Supply Voltage Power Dissipation (Note 3) Internally Limited ESD Susceptibility (Note 4) 2000V 2.7V ≤ VDD ≤ 5.5V ESD Susceptibility (Note 5) 200V 2.5V ≤ I2CVDD ≤ 5.5V Junction Temperature (TJ) 150˚C Thermal Resistance Audio Amplifier Electrical Characteristics VDD = 5.0V (Notes 1, 2) The following specifications apply for VDD = 5.0V, unless otherwise specified. Limits apply for TA = 25˚C. Symbol Parameter Conditions LM4857 Units (Limits) Typical (Note 6) Limits (Notes 7, 8) Mode 1, 6, 11 6 9.5 mA (max) Mode 4, 5, 9, 10, 14, 15 5 8 mA (max) VIN = 0V, No load; LD5 = RD5 = 0 (Note 9) IDD ISD PO Supply Current Shutdown Current Output Power Mode 2, 3, 7, 8, 12, 13 13 21 mA (max) Output mode 0 (Note 9) 0.2 3 µA (max) LM4857SP Speaker; THD+N = 1%; f = 1kHz; 4Ω BTL 1.6 Speaker; THD+N = 1%; f = 1kHz; 8Ω BTL 1.2 0.9 W (min) Headphone; THD+N = 1%; f = 1kHz; 32Ω SE 75 60 mW (min) Earpiece; THD+N = 1%; f = 1kHz; 32Ω BTL, CD4 = 0 100 80 mW (min) Earpiece; THD+N = 1%; f = 1kHz; 32Ω BTL, CD4 = 1 135 mW Speaker; PO= 400mW; f = 1kHz; 8Ω BTL 0.05 % Headphone; PO= 15mW; f = 1kHz; 32Ω SE 0.04 % Earpiece; PO= 15mW; f = 1kHz; 32Ω BTL, CD4 = 0 0.05 % Line Out, VO= 1VRMS; f = 1kHz; 5kΩ SE 0.009 % W LD5 = RD5 = 0 THD+N VOS Total Harmonic Distortion Plus Noise Offset Voltage www.national.com Speaker; LD5 = RD5 = 0 5 40 mV (max) Earpiece; LD5 = RD5 = 0 5 30 mV (max) 6 LM4857 Audio Amplifier Electrical Characteristics VDD = 5.0V (Notes 1, 2) (Continued) The following specifications apply for VDD = 5.0V, unless otherwise specified. Limits apply for TA = 25˚C. Symbol Parameter Conditions LM4857 Typical (Note 6) Limits (Notes 7, 8) Units (Limits) A-weighted, 0dB gain; (Note 11) LD5 = RD5 = 0; Audio Inputs Terminated NOUT Output Noise Speaker; Mode 2, 3, 7, 8 27 µV Speaker; Mode 12, 13 38 µV Headphone; Mode 3, 4, 8, 9 10 µV Headphone; Mode 13, 14 14 µV Earpiece; Mode 1; CD4 = 0 13 µV Earpiece; Mode 6 18 µV Earpiece; Mode 11 21 µV Line Out; Mode 5 11 µV Line Out; Mode 10 14 µV Line Out; Mode 15 17 µV f = 217Hz; Vrip = 200mVpp; CB = 2.2µF; 0dB gain; (Note 11) LD5 = RD5 = 0; Audio Inputs Terminated PSRR Power Supply Rejection Ratio Speaker; Mode 2, 3, 7, 8 70 Speaker; Mode 12, 13, 64 Headphone; Mode 3, 4, 8, 9 86 Headphone; Mode 13, 14 73 Earpiece; Mode1 75 Earpiece; Mode 6 70 Earpiece; Mode 11 66 dB 54 dB (min) dB 60 dB (min) dB dB 57 dB (min) Line Out; Mode 5 86 dB Line Out; Mode 10 74 dB Line Out; Mode 15 68 57 dB (min) LD5 = RD5 = 0 Xtalk TWU Crosstalk Wake-up Time Loudspeaker; PO= 400mW; f = 1kHz 85 dB Headphone; PO= 15mW; f = 1kHz 85 dB CD5 = 0; CB = 2.2µF 120 ms CD5 = 1; CB = 2.2µF 230 ms Audio Amplifier Electrical Characteristics VDD = 3.0V (Notes 1, 2) The following specifications apply for VDD = 3.0V, unless otherwise specified. Limits apply for TA = 25˚C. Symbol Parameter Conditions LM4857 Typical (Note 6) Limits (Notes 7, 8) Units (Limits) VIN = 0V, No load; LD5 = RD5 = 0 (Note 9) IDD ISD PO Mode 1, 6, 11 5.5 9 mA (max) Mode 4, 5, 9, 10, 14, 15 4.5 7.5 mA (max) Mode 2, 3, 7, 8, 12, 13 11.2 19 mA (max) Shutdown Current Mode 0 (Note 9) 0.06 2.5 µA (max) Output Power LM4857SP Speaker; THD+N = 1%; f = 1kHz; 4Ω BTL 530 Supply Current 7 mW www.national.com LM4857 Audio Amplifier Electrical Characteristics VDD = 3.0V (Notes 1, 2) (Continued) The following specifications apply for VDD = 3.0V, unless otherwise specified. Limits apply for TA = 25˚C. Symbol PO Parameter Output Power Conditions LM4857 Units (Limits) Typical (Note 6) Limits (Notes 7, 8) Speaker; THD+N = 1%; f = 1kHz; 8Ω BTL 400 320 mW (min) Headphone; THD+N = 1%; f = 1kHz; 32Ω SE 25 20 mW (min) Earpiece; THD+N = 1%; f = 1kHz; 32Ω BTL; CD4 = 0 30 22 mW (min) Earpiece; THD+N = 1%; f = 1kHz; 32Ω BTL; CD4 = 1 30 mW Speaker; PO= 200mW; f = 1kHz; 8Ω BTL 0.05 % Headphone; PO= 10mW; f = 1kHz; 32Ω SE 0.04 % Earpiece; PO=10mW; f = 1kHz; 32Ω BTL; CD4 = 0 0.06 % Line Out; VO= 1VRMS; f = 1kHz; 5kΩ SE 0.015 % LD5 = RD5 = 0 THD+N VOS Total Harmonic Distortion Plus Noise Offset Voltage Speaker; LD5 = RD5 = 0 5 40 mV (max) Earpiece; LD5 = RD5 = 0 5 30 mV (max) A-weighted; 0dB gain; (Note 11) LD5 = RD5 = 0; All Inputs Terminated NOUT Output Noise Speaker; Mode 2, 3, 7, 8 27 µV Speaker; Mode 12, 13 38 µV Headphone; Mode 3, 4, 8, 9 10 µV Headphone; Mode 13, 14 14 µV Earpiece; Mode 1 13 µV Earpiece; Mode 6 18 µV Earpiece; Mode 11 21 µV Line Out; Mode 5 11 µV Line Out; Mode 10 14 µV Line Out; Mode 15 17 µV f = 217Hz, Vrip = 200mVpp; CB = 2.2µF; 0dB gain; (Note 11) LD5 = RD5 = 0; All Audio Inputs Terminated PSRR Power Supply Rejection Ratio www.national.com Speaker; Mode 2, 3, 7, 8 70 Speaker; Mode 12, 13, 65 Headphone; Mode 3, 4, 8, 9 87 dB 55 dB (min) dB Headphone; Mode 13, 14 75 Earpiece; Mode1 76 dB Earpiece; Mode 6 70 dB Earpiece; Mode 11 67 Line Out; Mode 5 88 Line Out; Mode 10 74 Line Out; Mode 15 71 8 62 57 dB (min) dB (min) dB dB 58 dB (min) LM4857 Audio Amplifier Electrical Characteristics VDD = 3.0V (Notes 1, 2) (Continued) The following specifications apply for VDD = 3.0V, unless otherwise specified. Limits apply for TA = 25˚C. Symbol Parameter Conditions LM4857 Typical (Note 6) Limits (Notes 7, 8) Units (Limits) LD5 = RD5 = 0 Xtalk TWU Crosstalk Wake-up Time Loudspeaker; PO= 200mW; f = 1kHz 82 dB Headphone; PO= 10mW; f = 1kHz 82 dB CD5 = 0; CB = 2.2µF 80 ms CD5 = 1; CB = 2.2µF 140 ms Volume Control Electrical Characteristics (Notes 1, 2) The following specifications apply for VDD = 5.0V and VDD = 3.0V, unless otherwise specified. Limits apply for TA = 25˚C. Symbol Parameter Stereo Volume Control Range Mono Volume Control Range Conditions LM4857 Units (Limits) Typical (Note 6) Limits (Notes 7, 8) maximum gain setting 6 5.5 6.5 dB (min) dB (max) minimum gain setting -40.5 -41 -40 dB (min) dB (max) maximum gain setting 12 11.5 12.5 dB (min) dB (max) minimum gain setting -34.5 -35 -34 dB (min) dB (max) +/-0.5 dB (max) Volume Control Step Size 1.5 Volume Control Step Size Error +/-0.2 Stereo Channel to Channel Gain Mismatch dB 0.3 dB 85 dB Mode 12, Vin = 1VRMS Mute Attenuation Headphone Line Out LIN and RIN Input Impedance MIN Input Impedance 85 dB maximum gain setting 33.5 25 42 kΩ (min) kΩ (max) minimum gain setting 100 75 125 kΩ (min) kΩ (max) maximum gain setting 20 15 25 kΩ (min) kΩ (max) minimum gain setting 98 73 123 kΩ (min) kΩ (max) Control Interface Electrical Characteristics (Notes 1, 2) The following specifications apply for VDD = 5V and VDD = 3V and 2.5V ≤ I2CVDD ≤ 5.5V, unless otherwise specified. Limits apply for TA = 25˚C. Symbol Parameter Conditions LM4857 Typical (Note 6) Limits (Notes 7, 8) Units (Limits) t1 SCL period 2.5 µs (min) t2 SDA Set-up Time 100 ns (min) t3 SDA Stable Time 0 ns (min) t4 Start Condition Time 100 ns (min) 9 www.national.com LM4857 Control Interface Electrical Characteristics (Notes 1, 2) (Continued) The following specifications apply for VDD = 5V and VDD = 3V and 2.5V ≤ I2CVDD ≤ 5.5V, unless otherwise specified. Limits apply for TA = 25˚C. Symbol Parameter Conditions LM4857 Typical (Note 6) Limits (Notes 7, 8) 100 Units (Limits) t5 Stop Condition time VIH Digital Input High Voltage 0.7 x I2CVDD ns (min) V (min) VIL Digital Input Low Voltage 0.3 x I2CVDD V (max) Note 1: All voltages are measured with respect to the GND pin unless otherwise specified. Note 2: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional but do not guarantee specific performance limits. Electrical Characteristics state DC and AC electrical specifications under particular test conditions which guarantee specific performance limits. This assumes that the device is within the Operating Ratings. Specifications are not guaranteed for parameters where no limit is given, however, the typical value is a good indication of device performance. Note 3: The maximum power dissipation must be derated at elevated temperatures and is dictated by TJMAX, θJA, and the ambient temperature, TA. The maximum allowable power dissipation is PDMAX = (TJMAX - TA) / θJA or the number given in Absolute Maximum Ratings, whichever is lower. For the LM4857 operating in Mode 3, 8, or 13 with VDD = 5V, 8Ω stereo loudspeakers and 32Ω stereo headphones, the total power dissipation is 1.348W. θJA = 62˚C/W. Note 4: Human body model, 100pF discharged through a 1.5kΩ resistor. Note 5: Machine Model, 220pF - 240pF discharged through all pins. Note 6: Typicals are measured at +25˚C and represent the parametric norm. Note 7: Limits are guaranteed to National’s AOQL (Average Outgoing Quality Level). Note 8: Datasheet min/max specification limits are guaranteed by design, test, or statistical analysis. Note 9: Shutdown current and supply current are measured in a normal room environment. All digital input pins are connected to I2CVDD. Note 10: The given θJA is for an LM4857ITL mounted on a PCB with a 2in2 area of 1oz printed circuit board copper ground plane. Note 11: “0dB gain” refers to the volume control gain setting of MIN, LIN, and RIN set at 0dB. Note 12: The given θJA is for an LM4857SP mounted on a PCB with a 2in2 area of 1oz printed circuit board ground plane. www.national.com 10 LM4857 External Components Description Components Functional Description 1. CIN This is the input coupling capacitor. It blocks the DC voltage and couples the input signal to the amplifier’s input terminals. CIN also creates a highpass filter with the internal resistor Ri (Input Impedance) at fc = 1/(2πRiCIN). 2. CS This is the supply bypass capacitor. It filters the supply voltage applied to the VDD pin and helps reduce the noise at the VDD pin. 3. CB This is the BYPASS pin capacitor. It filters the VDD / 2 voltage and helps maintain the LM4857’s PSRR. 4. COUT This is the output coupling capacitor. It blocks the DC voltage and couples the output signal to the speaker load RL. COUT also creates a high pass filter with RL at fO = 1/(2πRLCOUT). 5. R3D This resistor sets the gain of the National 3D effect. Please refer to the National 3D Enhancement section for information on selecting the value of R3D. 6. C3D This capacitor sets the frequency at which the National 3D effect starts to occur. Please refer to the National 3D Enhancement section for information on selecting the value of C3D. Typical Performance Characteristics (Note 11) LM4857SP THD+N vs Frequency LM4857SP THD+N vs Frequency 20079755 20079756 VDD = 5V; LLS, RLS; PO = 400mW; RL = 4Ω; Mode 7; 0dB Gain VDD = 3V; LLS, RLS; PO = 200mW; RL = 4Ω; Mode 7; 0dB Gain 11 www.national.com LM4857 Typical Performance Characteristics (Note 11) LM4857SP THD+N vs Output Power (Continued) LM4857SP THD+N vs Output Power 20079757 20079758 VDD = 5V; LLS, RLS; f = 1kHz; RL = 4Ω; Mode 7; 0dB Gain VDD = 3V; LLS, RLS; f = 1kHz; RL = 4Ω; Mode 7; 0dB Gain THD+N vs Frequency THD+N vs Frequency 20079710 20079711 VDD = 5V; LLS, RLS; PO = 400mW; RL = 8Ω; Mode 7; 0dB Gain www.national.com VDD = 3V; LLS, RLS; PO = 200mW; RL = 8Ω; Mode 7; 0dB Gain 12 (Note 11) THD+N vs Frequency LM4857 Typical Performance Characteristics (Continued) THD+N vs Frequency 20079712 20079713 VDD = 5V; LHP, RHP; PO = 15mW; RL = 32Ω; Mode 9; 0dB Gain VDD = 3V; LHP, RHP; PO = 10mW; RL = 32Ω; Mode 9; 0dB Gain THD+N vs Frequency THD+N vs Frequency 20079714 20079715 VDD = 5V; EP; PO = 15mW; RL = 32Ω; Mode 1; 0dB Gain, CD4 = 0 VDD = 3V; EP; PO = 10mW; RL = 32Ω; Mode 1; 0dB Gain, CD4 = 0 13 www.national.com LM4857 Typical Performance Characteristics (Note 11) THD+N vs Frequency (Continued) THD+N vs Frequency 20079716 20079717 VDD = 5V; LINEOUT; VO = 1VRMS; RL = 5kΩ; Mode 5; 0dB Gain VDD = 3V; LINEOUT; VO = 1VRMS; RL = 5kΩ; Mode 5; 0dB Gain THD+N vs Frequency THD+N vs Frequency 20079718 20079719 VDD = 5V; LINEOUT; VO = 1VRMS; RL = 5kΩ; Mode 10; 0dB Gain www.national.com VDD = 3V; LINEOUT; VO = 1VRMS; RL = 5kΩ; Mode 10; 0dB Gain 14 (Note 11) THD+N vs Output Power LM4857 Typical Performance Characteristics (Continued) THD+N vs Output Power 20079720 20079721 VDD = 5V; LLS, RLS; f = 1kHz; RL = 8Ω; Mode 7; 0dB Gain VDD = 3V; LLS, RLS; f = 1kHz; RL = 8Ω; Mode 7; 0dB Gain THD+N vs Output Power THD+N vs Output Power 20079722 20079723 VDD = 5V; LHP, RHP; f = 1kHz; RL = 32Ω; Mode 9; 0dB Gain VDD = 3V; LHP, RHP; f = 1kHz; RL = 32Ω; Mode 9; 0dB Gain 15 www.national.com LM4857 Typical Performance Characteristics (Note 11) THD+N vs Output Power (Continued) THD+N vs Output Power 20079724 20079725 VDD = 5V; EP; f = 1kHz; RL = 32Ω; Mode 1; 0dB Gain; Top-CD4 = 1; Bot-CD4 = 0 VDD = 3V; EP; f = 1kHz; RL = 32Ω; Mode 1; 0dB Gain PSRR vs Frequency PSRR vs Frequency 20079726 20079727 VDD = 5V; LLS, RLS; RL = 8Ω; 0db Gain; All audio inputs terminated Top-Mode 12, 13; Mid-Mode 2, 3; Bot-Mode 7, 8 www.national.com VDD = 3V; LLS, RLS; RL = 8Ω; 0db Gain; All audio inputs terminated Top-Mode 12, 13; Mid-Mode 2, 3; Bot-Mode 7, 8 16 (Note 11) PSRR vs Frequency LM4857 Typical Performance Characteristics (Continued) PSRR vs Frequency 20079728 20079729 VDD = 5V; LHP, RHP; RL = 32Ω; 0db Gain; All audio inputs terminated Top-Mode 13, 14; Mid-Mode 3, 4; Bot-Mode 8, 9 VDD = 3V; LHP, RHP; RL = 32Ω; 0db Gain; All audio inputs terminated Top-Mode 13, 14; Mid-Mode 3, 4; Bot-Mode 8, 9 PSRR vs Frequency PSRR vs Frequency 20079730 20079731 VDD = 5V; EP; RL = 32Ω; 0db Gain; All audio inputs terminated Top-Mode 11; Mid-Mode 6; Bot-Mode 1 VDD = 3V; EP; RL = 32Ω; 0db Gain; All audio inputs terminated Top-Mode 11; Mid-Mode 6; Bot-Mode 1 17 www.national.com LM4857 Typical Performance Characteristics (Note 11) PSRR vs Frequency (Continued) PSRR vs Frequency 20079732 20079733 VDD = 5V; LINEOUT; RL = 5kΩ; 0db Gain; All audio inputs terminated Top-Mode 15; Mid-Mode 10; Bot-Mode 5 VDD = 3V; LINEOUT; RL = 5kΩ; 0db Gain; All audio inputs terminated Top-Mode 15; Mid-Mode 10; Bot-Mode 5 Crosstalk vs Frequency Crosstalk vs Frequency 20079734 20079735 VDD = 5V; LLS, RLS; PO = 400mW; RL = 8Ω; Mode 7; 0db Gain; 3D off Top-Left to Right; Bot- Right to Left www.national.com VDD = 3V; LLS, RLS; PO = 200mW; RL = 8Ω; Mode 7; 0db Gain; 3D off Top-Left to Right; Bot- Right to Left 18 (Note 11) Crosstalk vs Frequency LM4857 Typical Performance Characteristics (Continued) Crosstalk vs Frequency 20079736 20079737 VDD = 5V; LHP, RHP; PO = 15mW; RL = 32Ω; Mode 9; 0db Gain; 3D off Top-Left to Right; Bot- Right to Left VDD = 3V; LHP, RHP; PO = 10mW; RL = 32Ω; Mode 9; 0db Gain; 3D off Top-Left to Right; Bot- Right to Left Frequency vs Response Frequency vs Response 20079739 LLS, RLS; RL = 8Ω; Mode 7; Full Gain 20079738 LLS, RLS; RL = 8Ω; Mode 2; Full Gain 19 www.national.com LM4857 Typical Performance Characteristics (Note 11) Frequency vs Response (Continued) Frequency vs Response 20079740 20079741 LHP, RHP; RL = 32Ω; CO = 100µF Mode 4; Full Gain LHP, RHP; RL = 32Ω; CO = 100µF Mode 9; Full Gain Frequency vs Response Frequency vs Response 20079742 20079743 EP; RL = 32Ω; Mode 1; Full Gain Top-CD4 = 1; Bot-CD4 = 0 www.national.com LINEOUT; RL = 5kΩ; CO = 2.2µF Mode 5; Full Gain 20 (Note 11) Frequency vs Response LM4857 Typical Performance Characteristics (Continued) Power Dissipation vs Output Power 20079745 20079744 LINEOUT; RL = 5kΩ; CO = 2.2µF Mode 10; Full Gain LLS, RLS; RL = 8Ω; THD+N ≤ 1% Top-VDD = 5V; Bot-VDD = 3V per channel Power Dissipation vs Output Power Power Dissipation vs Output Power 20079746 20079747 LHP, RHP; RL = 32Ω; THD+N ≤ 1% Top-VDD = 5V; Bot-VDD = 3V per channel EP; RL = 32Ω; THD+N ≤ 1% Top-VDD = 5V; Bot-VDD = 3V 21 www.national.com LM4857 Typical Performance Characteristics (Note 11) Output Power vs Load Resistance (Continued) Output Power vs Load Resistance 20079748 20079749 LLS, RLS; RL = 8Ω; Top-VDD = 5V, 10% THD+N; Topmid-VDD = 5V, 1% THD+N; Botmid-VDD = 3V, 10% THD+N; Bot-VDD = 3V, 1% THD+N LHP, RHP; RL = 32Ω; Top-VDD = 5V, 10% THD+N; Topmid-VDD = 5V, 1% THD+N; Botmid-VDD = 3V, 10% THD+N; Bot-VDD = 3V, 1% THD+N Output Power vs Load Resistance Output Power vs Load Resistance 20079750 20079751 EP; RL = 32Ω; CD4 = 0 Top-VDD = 5V, 10% THD+N; Topmid-VDD = 5V, 1% THD+N; Botmid-VDD = 3V, 10% THD+N; Bot-VDD = 3V, 1% THD+N www.national.com EP; RL = 32Ω; CD4 = 1 Top-VDD = 5V, 10% THD+N; Topmid-VDD = 5V, 1% THD+N; Botmid-VDD = 3V, 10% THD+N; Bot-VDD = 3V, 1% THD+N 22 (Note 11) Output Power vs Supply Voltage LM4857 Typical Performance Characteristics (Continued) Output Power vs Supply Voltage 20079752 20079753 LLS, RLS; RL = 8Ω; Top–10% THD+N; Bot–1% THD+N LHP, RHP; RL = 32Ω; Top–10% THD+N; Bot–1% THD+N Output Power vs Supply Voltage 20079754 EP; RL = 32Ω; Top–10% THD+N; CD4 = 1; Topmid–1% THD+N, CD4 = 1 Botmid–10% THD+N; CD4 = 0; Bot–1% THD+N, CD4 = 0 23 www.national.com LM4857 Application Information 200797F5 FIGURE 2. I2C Bus Format 200797F4 FIGURE 3. I2C Timing Diagram TABLE 1. Chip Address A7 A6 A5 A4 A3 A2 A1 Chip Address 1 1 1 1 1 0 EC A0 0 ADR = 0 1 1 1 1 1 0 0 0 ADR = 1 1 1 1 1 1 0 1 0 EC - externally configured by ADR pin TABLE 2. Control Registers D7 D6 D5 D4 D3 D2 D1 D0 Mono Volume control 0 0 0 MD4 MD3 MD2 MD1 MD0 Left Volume control 0 1 LD5 LD4 LD3 LD2 LD1 LD0 Right Volume control 1 0 RD5 RD4 RD3 RD2 RD1 RD0 Mode control 1 1 CD5 CD4 CD3 CD2 CD1 CD0 www.national.com 24 LM4857 Application Information (Continued) TABLE 3. Mono Volume Control MD4 MD3 MD2 MD1 MD0 Gain (dB) 0 0 0 0 0 -34.5 0 0 0 0 1 -33.0 0 0 0 1 0 -31.5 0 0 0 1 1 -30.0 0 0 1 0 0 -28.5 0 0 1 0 1 -27.0 0 0 1 1 0 -25.5 0 0 1 1 1 -24.0 0 1 0 0 0 -22.5 0 1 0 0 1 -21.0 0 1 0 1 0 -19.5 0 1 0 1 1 -18.0 0 1 1 0 0 -16.5 0 1 1 0 1 -15.0 0 1 1 1 0 -13.5 0 1 1 1 1 -12.0 1 0 0 0 0 -10.5 1 0 0 0 1 -9.0 1 0 0 1 0 -7.5 1 0 0 1 1 -6.0 1 0 1 0 0 -4.5 1 0 1 0 1 -3.0 1 0 1 1 0 -1.5 1 0 1 1 1 0.0 1 1 0 0 0 1.5 1 1 0 0 1 3.0 1 1 0 1 0 4.5 1 1 0 1 1 6.0 1 1 1 0 0 7.5 1 1 1 0 1 9.0 1 1 1 1 0 10.5 1 1 1 1 1 12.0 25 www.national.com LM4857 Application Information (Continued) TABLE 4. Stereo Volume Control LD4//RD4 LD3//RD3 LD2//RD2 LD1//RD1 LD0//RD0 Gain (dB) 0 0 0 0 0 -40.5 0 0 0 0 1 -39.0 0 0 0 1 0 -37.5 0 0 0 1 1 -36.0 0 0 1 0 0 -34.5 0 0 1 0 1 -33.0 0 0 1 1 0 -31.5 0 0 1 1 1 -30.0 0 1 0 0 0 -28.5 0 1 0 0 1 -27.0 0 1 0 1 0 -25.5 0 1 0 1 1 -24.0 0 1 1 0 0 -22.5 0 1 1 0 1 -21.0 0 1 1 1 0 -19.5 0 1 1 1 1 -18.0 1 0 0 0 0 -16.5 1 0 0 0 1 -15.0 1 0 0 1 0 -13.5 1 0 0 1 1 -12.0 1 0 1 0 0 -10.5 1 0 1 0 1 -9.0 1 0 1 1 0 -7.5 1 0 1 1 1 -6.0 1 1 0 0 0 -4.5 1 1 0 0 1 -3.0 1 1 0 1 0 -1.5 1 1 0 1 1 0.0 1 1 1 0 0 1.5 1 1 1 0 1 3.0 1 1 1 1 0 4.5 1 1 1 1 1 6.0 www.national.com 26 LM4857 Application Information (Continued) TABLE 5. Mixer and Output Mode Control Mode CD3 CD2 CD1 CD0 Mono Line Out (CD4 = 0) Mono Earpiece (CD4 = 1) Loudspeaker Loudspeaker Headphone L R L Headphone R 0 0 0 0 0 SD SD SD SD SD SD SD 1 0 0 0 1 MUTE (GM x M) 2(GM x M) SD SD MUTE MUTE 2 0 0 1 0 MUTE SD SD 2(GM x M) 2(GM x M) MUTE MUTE 3 0 0 1 1 MUTE SD SD 2(GM x M) 2(GM x M) (GM x M) (GM x M) 4 0 1 0 0 MUTE SD SD SD SD (GM x M) (GM x M) 5 0 1 0 1 (GM x M) SD SD SD SD MUTE MUTE 6 0 1 1 0 MUTE (GL x L) + (GR x R) 2(GL x L) + 2(GR x R) SD SD MUTE MUTE 7 0 1 1 1 MUTE SD SD 2(GL x L) 2(GR x R) MUTE MUTE 8 1 0 0 0 MUTE SD SD 2(GL x L) 2(GR x R) (GL x L) (GR x R) 9 1 0 0 1 MUTE SD SD SD SD (GL x L) (GR x R) 10 1 0 1 0 (GL x L) + (GR x R) SD SD SD SD MUTE MUTE 11 1 0 1 1 MUTE SD SD MUTE MUTE 12 1 1 0 0 MUTE SD SD 2(GL x L) + 2(GM x M) 2(GR x R) + 2(GM x M) MUTE MUTE 13 1 1 0 1 MUTE SD SD 2(GL x L) + 2(GM x M) 2(GR x R) + 2(GM x M) (GL x L) + (GM x M) (GR x R) + (GM x M) 14 1 1 1 0 MUTE SD SD SD SD (GL x L) + (GM x M) (GR x R) + (GM x M) 15 1 1 1 1 (GM x M) +(GL x L) +(GR x R) SD SD SD SD MUTE MUTE (GM x M) + 2(GM x (GL x L) + M) + (GR x R) 2(GL x L) +2(GR x R) M - MIN Input Level L - LIN Input Level R - RIN Input Level GM - Mono Volume Control Gain GL - Left Stereo Volume Control Gain GR - Right Stereo Volume Control Gain SD - Shutdown MUTE - Mute TABLE 6. National 3D Enhancement LD5 RD5 0 Loudspeaker National 3D Off 1 Loudspeaker National 3D On 0 Headphone National 3D Off 1 Headphone National 3D On TABLE 7. Wake-up Time Select CD5 0 Fast Wake-up Setting 1 Slow Wake-up Setting 27 www.national.com LM4857 Application Information (Continued) TABLE 8. Earpiece Amplifier Gain Select CD4 0 0dB Earpiece Output Stage Gain Setting 1 6dB Earpiece Output Stage Gain Setting I2C COMPATIBLE INTERFACE channel separation whenever the left and right speakers are too close to one another, due to system size constraints or equipment limitations. An external RC network, shown in Figure 1, is required to enable the 3D effect. There are separate RC networks for both the stereo loudspeaker outputs as well as the stereo headphone outputs, so the 3D effect can be set independently for each set of stereo outputs. The LM4857 uses a serial bus, which conforms to the I2C protocol, to control the chip’s functions with two wires: clock (SCL) and data (SDA). The clock line is uni-directional. The data line is bi-directional (open-collector). The maximum clock frequency specified by the I2C standard is 400kHz. In this discussion, the master is the controlling microcontroller and the slave is the LM4857. The I2C address for the LM4857 is determined using the ADR pin. The LM4857’s two possible I2C chip addresses are of the form 111110X10 (binary), where X1 = 0, if ADR is logic low; and X1 = 1, if ADR is logic high. If the I2C interface is used to address a number of chips in a system, the LM4857’s chip address can be changed to avoid any possible address conflicts. The bus format for the I2C interface is shown in Figure 2. The bus format diagram is broken up into six major sections: The amount of the 3D effect is set by the R3D resistor. Decreasing the value of R3D will increase the 3D effect. The C3D capacitor sets the low cutoff frequency of the 3D effect. Increasing the value of C3D will decrease the low cutoff frequency at which the 3D effect starts to occur, as shown by Equation 1. f3D(-3dB) = 1 / 2π(R3D)(C3D) The "start" signal is generated by lowering the data signal while the clock signal is high. The start signal will alert all devices attached to the I2C bus to check the incoming address against their own address. The 8-bit chip address is sent next, most significant bit first. The data is latched in on the rising edge of the clock. Each address bit must be stable while the clock level is high. After the last bit of the address bit is sent, the master releases the data line high (through a pull-up resistor). Then the master sends an acknowledge clock pulse. If the LM4857 has received the address correctly, then it holds the data line low during the clock pulse. If the data line is not held low during the acknowledge clock pulse, then the master should abort the rest of the data transfer to the LM4857. The 8 bits of data are sent next, most significant bit first. Each data bit should be valid while the clock level is stable high. After the data byte is sent, the master must check for another acknowledge to see if the LM4857 received the data. If the master has more data bytes to send to the LM4857, then the master can repeat the previous two steps until all data bytes have been sent. The "stop" signal ends the transfer. To signal "stop", the data signal goes high while the clock signal is high. The data line should be held high when not in use. Activating the 3D effect will cause an increase in gain by a multiplication factor of (1 + 9kΩ/R3D). Setting R3D to 9kΩ will result in a gain increase by a multiplication factor of (1+ 9kΩ/9kΩ) = 2 or 6dB whenever the 3D effect is activated. The volume control can be programmed through the I2C compatible interface to compensate for the extra 6dB increase in gain. For example, if the stereo volume control is set at 0dB (11011 from Table 4) before the 3D effect is activated, the volume control should be programmed to –6dB (10111 from Table 4) immediately after the 3D effect has been activated. Setting R3D = 20kΩ and C3D = 0.22µF allows the LM4857 to produce a pronounced 3D effect with a minimal increase in output noise. EXPOSED-DAP MOUNTING CONSIDERATIONS The LM4857’s exposed-DAP (die attach paddle) package (SP) provides a low thermal resistance between the die and the PCB to which the part is mounted and soldered. This allows rapid heat transfer from the die to the surrounding PCB copper area heatsink, copper traces, ground plane, and finally, surrounding air. The result is a low voltage audio power amplifier that produces 1.6W dissipation in a 4Ω load at ≤ 1% THD+N and over 1.8W in a 3Ω load at 10% THD+N. This high power is achieved through careful consideration of necessary thermal design. Failing to optimize thermal design may compromise the LM4857’s high power performance and activate unwanted, though necessary, thermal shutdown protection. The SP package must have its DAP soldered to a copper pad on the PCB. The DAP’s PCB copper pad is then, ideally, connected to a large plane of continuous unbroken copper. This plane forms a thermal mass, heat sink, and radiation area. Place the heat sink area on either outside plane in the case of a two-sided or multi-layer PCB. (The heat sink area can also be placed on an inner layer of a multi-layer board. The thermal resistance, however, will be higher.) Connect the DAP copper pad to the inner layer or backside copper heat sink area with 9 (3 X 3) (SP) vias. The via diameter should be 0.012in - 0.013in with a 1.27mm pitch. Ensure efficient thermal conductivity by plugging and tenting the vias with plating and solder mask, respectively. I2C INTERFACE POWER SUPPLY PIN (I2CVDD) The LM4857’s I2C interface is powered up through the I2CVDD pin. The LM4857’s I2C interface operates at a voltage level set by the I2CVDD pin which can be set independent to that of the main power supply pin VDD. This is ideal whenever logic levels for the I2C interface are dictated by a microcontroller or microprocessor that is operating at a lower supply voltage than the main battery of a portable system. NATIONAL 3D ENHANCEMENT The LM4857 features a 3D audio enhancement effect that widens the perceived soundstage from a stereo audio signal. The 3D audio enhancement improves the apparent stereo www.national.com (1) 28 Bridge mode amplifiers are different from single-ended amplifiers that drive loads connected between a single amplifier’s output and ground. For a given supply voltage, bridge mode has a distinct advantage over the single-ended configuration: its differential output doubles the voltage swing across the load. Theoretically, this produces four times the output power when compared to a single-ended amplifier under the same conditions. This increase in attainable output power assumes that the amplifier is not current limited and that the output signal is not clipped. Another advantage of the differential bridge output is no net DC voltage across the load. This is accomplished by biasing LLS- and LLS+ outputs at half-supply. This eliminates the coupling capacitor that single supply, single-ended amplifiers require. Eliminating an output coupling capacitor in a typical single-ended configuration forces a single-supply amplifier’s half-supply bias voltage across the load. This increases internal IC power dissipation and may permanently damage loads such as speakers. (Continued) Best thermal performance is achieved with the largest practical copper heat sink area. If the heatsink and amplifier share the same PCB layer, a nominal 2in2 area is necessary for 5V operation with a 4Ω load. Heatsink areas not placed on the same PCB layer as the LM4857 should be 4in2 for the same supply voltage and load resistance. The last two area recommendations apply for 25˚C ambient temperature. Increase the area to compensate for ambient temperatures above 25˚C. In all circumstances and under all conditions, the junction temperature must be held below 150˚C to prevent activating the LM4857’s thermal shutdown protection. An example PCB layout for the exposed-DAP SP package is shown in the Demonstration Board Layout section. Further detailed and specific information concerning PCB layout and fabrication and mounting an SP (LLP) is found in National Semiconductor’s AN1187. PCB LAYOUT AND SUPPLY REGULATION CONSIDERATIONS FOR DRIVING 3Ω AND 4Ω LOADS POWER DISSIPATION Power dissipation is a major concern when designing a successful single-ended or bridged amplifier. A direct consequence of the increased power delivered to the load by a bridge amplifier is higher internal power dissipation. The LM4857 has 3 sets of bridged-tied amplifier pairs driving LLS, RLS, and EP. The maximum internal power dissipation operating in the bridge mode is twice that of a single-ended amplifier. From Equation (3) and (4), assuming a 5V power supply and an 8Ω load, the maximum power dissipation for LLS and RLS is 634mW per channel. From equation (5), assuming a 5V power supply and a 32Ω load, the maximum power dissipation for EP is 158mW. Power dissipated by a load is a function of the voltage swing across the load and the load’s impedance. As load impedance decreases, load dissipation becomes increasingly dependent on the interconnect (PCB trace and wire) resistance between the amplifier output pins and the load’s connections. Residual trace resistance causes a voltage drop, which results in power dissipated in the trace and not in the load as desired. For example, 0.1Ω trace resistance reduces the output power dissipated by a 4Ω load from 1.6W to 1.5W. The problem of decreased load dissipation is exacerbated as load impedance decreases. Therefore, to maintain the highest load dissipation and widest output voltage swing, PCB traces that connect the output pins to a load must be as wide as possible. Poor power supply regulation adversely affects maximum output power. A poorly regulated supply’s output voltage decreases with increasing load current. Reduced supply voltage causes decreased headroom, output signal clipping, and reduced output power. Even with tightly regulated supplies, trace resistance creates the same effects as poor supply regulation. Therefore, making the power supply traces as wide as possible helps maintain full output voltage swing. (3) PDMAX-RLS = 4(VDD)2 / (2π2 RL): Bridged (4) PDMAX-EP = 4(VDD)2 / (2π2 RL): Bridged (5) The LM4857 also has 3 sets of single-ended amplifiers driving LHP, RHP, and LINEOUT. The maximum internal power dissipation for ROUT and LOUT is given by equation (6) and (7). From Equations (6) and (7), assuming a 5V power supply and a 32Ω load, the maximum power dissipation for LOUT and ROUT is 40mW per channel. From equation (8), assuming a 5V power supply and a 5kΩ load, the maximum power dissipation for LINEOUT is negligible. BRIDGE CONFIGURATION EXPLANATION The LM4857 consists of three sets of a bridged-tied amplifier pairs that drive the left loudspeaker (LLS), the right loudspeaker (RLS), and the mono earpiece (EP). For this discussion, only the LLS bridge-tied amplifier pair will be referred to. The LM4857 drives a load, such as a speaker, connected between outputs, LLS+ and LLS-. In the LLS amplifier block, the output of the amplifier that drives LLS- serves as the input to the unity gain inverting amplifier that drives LLS+. This results in both amplifiers producing signals identical in magnitude, but 180˚ out of phase. Taking advantage of this phase difference, a load is placed between LLS- and LLS+ and driven differentially (commonly referred to as ’bridge mode’). This results in a differential or BTL gain of: AVD = 2(Rf / Ri) = 2 PDMAX-LLS = 4(VDD)2 / (2π2 RL): Bridged PDMAX-LHP = (VDD)2 / (2π2 RL): Single-ended (6) PDMAX-RHP = (VDD)2 / (2π2 RL): Single-ended (7) PDMAX-LINE = (VDD)2 / (2π2 RL): Single-ended (8) The maximum internal power dissipation of the LM4857 occurs during output modes 3, 8, and 13 when both loudspeaker and headphone amplifiers are simultaneously on; and is given by Equation (9). (2) Both the feedback resistor, Rf, and the input resistor, Ri, are internally set. PDMAX-TOTAL = PDMAX-LLS + PDMAX-RLS + PDMAX-LHP + PDMAX-RHP (9) 29 www.national.com LM4857 Application Information LM4857 Application Information LM4857’s supply pins and ground. Keep the length of leads and traces that connect capacitors between the LM4857’s power supply pin and ground as short as possible. (Continued) The maximum power dissipation point given by Equation (9) must not exceed the power dissipation given by Equation (10): PDMAX’ = (TJMAX - TA) / θJA SELECTING EXTERNAL COMPONENTS Input Capacitor Value Selection Amplifying the lowest audio frequencies requires a high value input coupling capacitor (Ci in Figure 1). In many cases, however, the speakers used in portable systems, whether internal or external, have little ability to reproduce signals below 50Hz. Applications using speakers with this limited frequency response reap little improvement; by using a large input capacitor. The internal input resistor (Ri) and the input capacitor (Ci) produce a high pass filter cutoff frequency that is found using Equation (13). (10) The LM4857’s TJMAX = 150˚C. In the ITL package, the LM4857’s θJA is 62˚C/W. At any given ambient temperature TA, use Equation (10) to find the maximum internal power dissipation supported by the IC packaging. Rearranging Equation (10) and substituting PDMAX-TOTAL for PDMAX’ results in Equation (11). This equation gives the maximum ambient temperature that still allows maximum stereo power dissipation without violating the LM4857’s maximum junction temperature. TA = TJMAX - PDMAX-TOTAL θJA fc = 1 / (2πRiCi) (11) As an example when using a speaker with a low frequency limit of 50Hz and Ri = 20kΩ, Ci, using Equation (13) is 0.19µF. The 0.22µF Ci shown in Figure 4 allows the LM4857 to drive high efficiency, full range speaker whose response extends below 40Hz. For a typical application with a 5V power supply, stereo 8Ω loudspeaker load, and the stereo 32Ω headphone load, the maximum ambient temperature that allows maximum stereo power dissipation without exceeding the maximum junction temperature is approximately 66.4˚C for the ITL package. TJMAX = PDMAX-TOTAL θJA + TA Output Capacitor Value Selection Amplifying the lowest audio frequencies also requires the use of a high value output coupling capacitor (CO in Figure 1). A high value output capacitor can be expensive and may compromise space efficiency in portable design. The speaker load (RL) and the output capacitor (CO) form a high pass filter with a low cutoff frequency determined using Equation (14). (12) Equation (12) gives the maximum junction temperature TJMAX. If the result violates the LM4857’s 150˚C, reduce the maximum junction temperature by reducing the power supply voltage or increasing the load resistance. Further allowance should be made for increased ambient temperatures. The above examples assume that a device is a surface mount part operating around the maximum power dissipation point. Since internal power dissipation is a function of output power, higher ambient temperatures are allowed as output power or duty cycle decreases. If the result of Equation (9) is greater than that of Equation (10), then decrease the supply voltage, increase the load impedance, or reduce the ambient temperature. If these measures are insufficient, a heat sink can be added to reduce θJA. The heat sink can be created using additional copper area around the package, with connections to the ground pin(s), supply pin and amplifier output pins. External, solder attached SMT heatsinks such as the Thermalloy 7106D can also improve power dissipation. When adding a heat sink, the θJA is the sum of θJC, θCS, and θSA. (θJC is the junction-to-case thermal impedance, θCS is the case-to-sink thermal impedance, and θSA is the sink-toambient thermal impedance.) Refer to the Typical Performance Characteristics curves for power dissipation information at lower output power levels. fc = 1 / (2πRLCO) (14) When using a typical headphone load of RL = 32Ω with a low frequency limit of 50Hz, CO is 99µF. The 100µF CO shown in Figure 4 allows the LM4857 to drive a headphone whose frequency response extends below 50Hz. Bypass Capacitor Value Selection Besides minimizing the input capacitor size, careful consideration should be paid to value of CB, the capacitor connected to the BYPASS pin. Since CB determines how fast the LM4857 settles to quiescent operation, its value is critical when minimizing turn-on pops. The slower the LM4857’s outputs ramp to their quiescent DC voltage (nominally VDD/ 2), the smaller the turn-on pop. Choosing CB equal to 2.2µF along with a small value of Ci (in the range of 0.1µF to 0.39µF), produces a click-less and pop-less shutdown function. As discussed above, choosing Ci no larger than necessary for the desired bandwidth helps minimize clicks and pops. CB’s value should be in the range of 5 times to 10 times the value of Ci. This ensures that output transients are eliminated when the LM4857 transitions in and out of shutdown mode. Connecting a 2.2µF capacitor, CB, between the BYPASS pin and ground improves the internal bias voltage’s stability and improves the amplifier’s PSRR. The PSRR improvements increase as the bypass pin capacitor value increases. However, increasing the value of CB will increase wake-up time. The selection of bypass capacitor value, CB, POWER SUPPLY BYPASSING As with any power amplifier, proper supply bypassing is critical for low noise performance and high power supply rejection. Applications that employ a 5V regulator typically use a 10µF in parallel with a 0.1µF filter capacitors to stabilize the regulator’s output, reduce noise on the supply line, and improve the supply’s transient response. However, their presence does not eliminate the need for a local 1.0µF tantalum bypass capacitance connected between the www.national.com (13) 30 LM4857 Application Information (Continued) depends on desired PSRR requirements, click and pop performance, wake-up time, system cost, and size constraints. 20079709 FIGURE 4. Reference Design Board Schematic 31 www.national.com LM4857 Demonstration Board ITL PCB Layout 20079707 20079706 Recommended ITL PCB Layout: Top Silkscreen Recommended ITL PCB Layout: Top Layer 20079704 20079705 Recommended ITL PCB Layout: Inner Layer 1 www.national.com Recommended ITL PCB Layout: Inner Layer 2 32 LM4857 Demonstration Board ITL PCB Layout (Continued) 20079703 Recommended ITL PCB Layout: Bottom Layer 33 www.national.com LM4857 Demonstration Board SP PCB Layout 200797I9 200797I8 Recommended SP PCB Layout: Top Over Layer Recommended SP PCB Layout: Top Layer 200797I6 200797I7 Recommended SP PCB Layout: Bottom Layer Recommended SP PCB Layout: Mid Layer www.national.com 34 LM4857 Revision History Rev Date Description 1.1 6/03/05 Changed the numerical value of 20 into 9 in the last paragraph of "NATIONAL 3D ENHANCEMENT (per Alvin F.), then re-released D/S to the WEB. (MC) 1.2 6/07/05 Deleted all references on GR pkg (GR pkgs on HOLD) per Kevin Chen, then re-WEBd the D/S. (MC) 35 www.national.com LM4857 Physical Dimensions inches (millimeters) unless otherwise noted 30-Bump micro SMD Order Number LM4857ITL NS Package Number TLA30CZA X1 = 2.543 ± 0.03 X2 = 2.949 ± 0.03 X3 = 0.6 ± 0.075 www.national.com 36 inches (millimeters) unless otherwise noted (Continued) 28 — Lead SP Package Order Number LM4857SP NS Package Number SPA28A National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. For the most current product information visit us at www.national.com. LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. BANNED SUBSTANCE COMPLIANCE National Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no ‘‘Banned Substances’’ as defined in CSP-9-111S2. Leadfree products are RoHS compliant. National Semiconductor Americas Customer Support Center Email: [email protected] Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: [email protected] Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Français Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: [email protected] National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: [email protected] Tel: 81-3-5639-7560 LM4857 Stereo 1.2W Audio Sub-system with 3D Enhancement Physical Dimensions