120 DATA SHEET ARRAY CHIP RESISTORS YC 158/358 (10Pin/8R) 5% sizes 0612/1225 Product specification – Nov 14, 2008 V.3 Supersedes Date of Mar. 06, 2003 RoHS compliant Product specification Chip Resistor Surface Mount YC SERIES 2 8 158/358 (RoHS Compliant) SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC This specification describes YC158/358 series chip resistor network with lead-free terminations made by thick film process. Both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. YAGEO BRAND ordering code GLOBAL PART NUMBER (PREFERRED) APPLICATIONS Terminal for SDRAM and DDRAM Computer applications: laptop computer, desktop computer Consume electronic equipment: PDAs, PNDs Mobile phone, telecom… YC 158/358 X X X X XX XXXX L (1) (2) (3) (4) (5) (6) (7) (1) SCHEMATIC L = L-type (for YC358) T = T-type (for YC158/358) (2) TOLERANCE J = ±5% (3) PACKAGING TYPE FEATURES RoHS compliant R = Paper taping reel (YC158) K = Embossed taping reel (YC358) Products with lead free terminations meet RoHS requirements (4) TEMPERATURE COEFFICIENT OF RESISTANCE - Pb-glass contained in electrodes (5) TAPING REEL - Resistor element and glass are exempted by RoHS - Reducing environmentally hazardous wastes High component and equipment reliability Saving of PCB space None forbidden-materials used in products/production – = Base on spec 07 = 7 inch dia. Reel 13 = 13 inch dia. Reel (6) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Detailed resistance rules show in table of “Resistance rule of global part number”. (7) OPTIONAL CODE L = optional symbol (Note) Halogen Free Epoxy Resistance rule of global part number Resistance code rule Example XRXX (1 to 9.76 Ω) 1R = 1 Ω 1R5 = 1.5 Ω 9R76 = 9.76 Ω XXRX (10 to 97.6 Ω) 10R = 10 Ω 97R6 = 97.6 Ω XXXR (100 to 976 Ω) 100R = 100 Ω XKXX (1 to 9.76 KΩ) 1K = 1,000 Ω 9K76 = 9760 Ω XMXX (1 to 9.76 MΩ) 1M = 1,000,000 Ω 9M76= 9,760,000 Ω ORDERING EXAMPLE The ordering code of a YC158/358T T-type chip resistor network, value 1,000 X with ±5% tolerance, supplied in 7-inch tape reel is: YC158/358TJR-071K(L). NOTE 1. All our RSMD products meet RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added (both are on customer request) www.yageo.com Nov 14, 2008 V.3 Product specification Chip Resistor Surface Mount YC SERIES 3 8 158/358 (RoHS Compliant) PHYCOMP BRAND ordering codes Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER (PREFERRED) For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2. 12NC CODE 2350 XXX XXXXX L (1) SIZE (2) TYPE (3) (4) START TOL. RESISTANCE IN (1) (%) RANGE PAPER / PE TAPE ON REEL (units) (2) 5,000 20,000 230 10xxx 230 12xxx EMBOSSED TAPE ON REEL(units) (2) 4,000 0612 RNA310 2350 ±5% 10 to 100 KΩ 1225 YC358L 2350 ±5% 10 to 330 KΩ 200 10xxx 1225 YC358T 2350 ±5% 10 to 330 KΩ 201 10xxx (1) The resistors have a 12-digit ordering code starting with 2350. (2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. Last digit of 12NC Resistance decade (3) Last digit 0.01 to 0.0976 X 0.1 to 0.976 X 0 1 to 9.76 X 8 10 to 97.6 X 9 100 to 976 X 1 ORDERING EXAMPLE 1 to 9.76 KX 2 The ordering code of a RNA310/YC358T T-type chip resistor network, value 1,000 X with ±5% tolerance, supplied in tape of 10,000 units per reel is: 235023010102(L) / 235020110102(L) or YC158/358TJR-071K (L). 10 to 97.6 KX 3 100 to 976 KX 4 1 to 9.76 MX 5 NOTE 10 to 97.6 MX 6 1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" Example: (3) The remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of “Last digit of 12NC”. (4) "L" is optional symbol (Note) . 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added (both are on customer request) 7 0.02 X = 0200 or 200 0.3 X = 3007 or 307 1X = 1008 or 108 33 KX = 3303 or 333 10 MX = 1006 or 106 www.yageo.com Nov 14, 2008 V.3 Product specification Chip Resistor Surface Mount SERIES YC 4 8 158/358 (RoHS Compliant) MARKING YC158 YC358 2 E-24 series: 3 digits 2 YNSC072 First two digits for significant figure and 3rd digit for number of zeros YNSC034 Fig. 1 Value = 24 KΩ Fig. 2 Value = 240 KΩ For further marking information, please see special data sheet “Chip resistors marking”. CONSTRUCTION The resistor is constructed on top of a high-grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element. The composition of the resistive element is a noble metal imbedded into a glass and covered by a second glass to prevent environment influences. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on Nibarrier) are added. See fig.3 OUTLINES overcoat resistive layer inner electrode termination ceramic substrate YNSC069 Fig. 3 Chip resistor outlines DIMENSIONS Table 1 TYPE YC158 YC358 B (mm) 0.30 ±0.15 0.50 ±0.15 H (mm) 0.45 ±0.05 1.10 ±0.15 P (mm) 0.64 ±0.05 1.27 ±0.05 L (mm) 3.20 ±0.20 6.40 ±0.20 T (mm) 0.60 ±0.10 0.60 ±0.10 W1 (mm) 0.35 ±0.15 0.50 ±0.15 W2 (mm) 1.60 ±0.15 3.20 ±0.20 H T B W1 W2 P L CCB261_a H2 Fig. 4 YC124 series chip resistors dimension For dimension see Table 1 SCHEMATIC For dimension see Fig. 4 and Table 1 L-type 10 9 R8 8 R7 R1 7 R6 R2 6 T-type 10 9 R5 R3 8 R7 R8 R4 7 R1 6 R6 R2 R5 R3 R4 YNSC019 1 Fig. 5 Equivalent circuit diagram 2 3 4 5 R1=R2=R3=R4=R5=R6=R7=R8 1 2 3 4 5 R1=R2=R3=R4=R5=R6=R7=R8 www.yageo.com Nov 14, 2008 V.3 Product specification Chip Resistor Surface Mount YC SERIES ELECTRICAL CHARACTERISTICS FOOTPRINT AND SOLDERING PROFILES Table 2 CHARACTERISTICS Operating Temperature Range YC158 1/16 W YC358 1/16 W –55 °C to +155 °C –55 °C to +155 °C Maximum Working Voltage 25 V 50 V Maximum Overload Voltage 50 V 100 V Dielectric Withstanding Voltage 50 V 100 V 10 Ω to 100 KΩ 10 Ω to 330 KΩ ±200 ppm/°C ±200 ppm/°C Resistance Range 5% (E24) Temperature Coefficient 5 8 158/358 (RoHS Compliant) For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”. PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE REEL DIMENSION Paper/PE taping reel (R) Embossed taping reel (K) YC158 YC358 7" (178 mm) 5,000 --- 13" (330 mm) 20,000 --- 7" (178 mm) --- 4,000 NOTE 1. For Paper/Embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”. FUNCTIONAL DESCRIPTION POWER RATING YC158/358 rated power at 70 °C is 1/16 W RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V=√(P X R) or max. working voltage whichever is less handbook, halfpage P (%Prated ) MLB206_2 100 50 0 55 0 50 70 100 155 o Tamb ( C) Where V=Continuous rated DC or AC (rms) working voltage (V) Fig. 6 Maximum dissipation (P) in percentage of rated power as a function of the operating ambient temperature (Tamb) P=Rated power (W) R=Resistance value (X) www.yageo.com Nov 14, 2008 V.3 Product specification Chip Resistor Surface Mount YC SERIES 6 8 158/358 (RoHS Compliant) TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Life/ Operational Life/ Endurance MIL-STD-202G-method 108A 1,000 hours at 70±5 °C applied RCWV 1.5 hours on, 0.5 hour off, still air required ±(2%+0.05 Ω) High Temperature Exposure/ Endurance at upper category temperature MIL-STD-202G-method 108A 1,000 hours at maximum operating temperature depending on specification, unpowered ±(1%+0.05 Ω) IEC 60115-1 4.25.3 JIS C 5202-7.11 No direct impingement of forced air to the parts Moisture Resistance MIL-STD-202G-method 106F IEC 60115-1 4.24.2 IEC 60115-1 4.25.1 JIS C 5202-7.10 Tolerances: 155±3 °C Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered ±(2%+0.05 Ω) Parts mounted on test-boards, without condensation on parts Measurement at 24±2 hours after test conclusion Thermal Shock MIL-STD-202G-method 107G -55/+155 °C Note: Number of cycles required is 300. Devices unmounted ±(0.5%+0.05 Ω) for 10 KΩ to 10 MΩ ±(1%+0.05 Ω) for others Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air Short time overload MIL-R-55342D-para 4.7.5 Board Flex/ Bending IEC60115-1 4.33 IEC60115-1 4.13 2.5 times RCWV or maximum overload voltage whichever is less for 5 sec at room temperature Device mounted on PCB test board as described, only 1 board bending required ±(2%+0.05 Ω) No visible damage ±(1%+0.05 Ω) No visible damage 3 mm bending Bending time: 60±5 seconds Ohmic value checked during bending www.yageo.com Nov 14, 2008 V.3 Product specification Chip Resistor Surface Mount YC SERIES 7 8 158/358 (RoHS Compliant) TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability - Wetting IPC/JEDECJ-STD-002B test B Electrical Test not required IEC 60068-2-58 Magnification 50X Well tinned (≥95% covered) No visible damage SMD conditions: 1st step: method B, aging 4 hours at 155 °C dry heat 2nd step: leadfree solder bath at 245±3 °C Dipping time: 3±0.5 seconds - Leaching - Resistance to Soldering Heat IPC/JEDECJ-STD-002B test D No visible damage IEC 60068-2-58 Leadfree solder, 260 °C, 30 seconds immersion time MIL-STD-202G-method 210F Condition B, no pre-heat of samples ±(1%+0.05 Ω) IEC 60068-2-58 Leadfree solder, 270 °C, 10 seconds immersion time No visible damage Procedure 2 for SMD: devices fluxed and cleaned with isopropanol www.yageo.com Nov 14, 2008 V.3 Product specification Chip Resistor Surface Mount YC SERIES 8 8 158/358 (RoHS Compliant) REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 3 Nov 14, 2008 - - New datasheet for YC158 and YC358 thick film 5% with lead-free terminations - Replace the YC158 and YC358 part of pdf files: Pu-YC158_5_PbFree_L_2.pdf, Yu-YC158_5_PbFree_L_2.pdf, Pu-YC358_5_PbFree_L_0.pdf and Yu-YC358_5_PbFree_L_0.pdf - Description of "Halogen Free Epoxy" added - Define global part number Version 2 Feb 22, 2005 - - Test method and procedure updated Version 1 Apr. 22, 2004 - - Added 13'' taping and Jumper, deleted G in ordering code, and test & requirement (Pb free) update Version 0 Nov. 10, 2003 - - First issue of this specification “ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.” www.yageo.com Nov 14, 2008 V.3