DATA SHEET P2SMSJ Series SEMICONDUCTOR H SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 5.0 to 170 Volts 200 Watt Peak Power Pulse SOD-123S Unit:inch(mm) 0.112(2.85) 0.100(2.55) •Ultra fast switching for high efficiency •For surface mounted applications •Low forward voltage drop and high current capability .045(1.15) .033(0.85) •Glass passivated chip 0.067(1.70) 0.055(1.40) FEATURES •Low reverse leakage current •Plastic material has UL flammability classification 94V-0 0.049(1.25) 0.033(0.85) • Pb free product at available : 99% Sn above meet RoHS environment substance directive request 0.004(0.10) 0.007(0.20) •High temperature soldering : 260OC / 10 seconds at terminals 0.025(0.65) 0.014(0.35) 0.152(3.85) 0.140(3.55) MECHANICAL DATA •Case : Molded plastic •Polarity : Indicated by cathode band •Weight : 0 .01 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25OC ambient temperature unless otherwise specified. R ating Symbol Value Uni ts P PPM 200 Watts Peak Forward Surge C urrent (Note 3) IFSM 20 A Peak Pulse C urrenton 10/1000us waveform (Notes 1, Fi g2) IPPM see Table 1 A PM(AV) 1.0 Watts TJ,TSTG -50 to +150 O RθJA 180 O Peak Pulse Power D i ssi pati on (Notes 1,2,5,Fi g1) Steady State Power D i ssi pati on (Notes 4) Operati ng Juncti on and Storage Temperature Range Thermal resi stance C C NOTES : 1.Non-repetitive current pulse, per Fig.3 and derated above T A =25 O C per Fig.2 . 2.Mounted on 5.0mm 2 copper pads to each terminal. 3.8.3ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minutes maximum. 4.lead temperature at 75 OC =T L . 5.Peak pulse power waveform is 10/1000us . 6.V =1.25@200mA http://www.yeashin.com 1 REV.02 20120305 P2SMSJ Series Part N umber V BR @ I T V R WM Min . IR @ VRWM Ma x . IT V VC @ IPP Marking C ode V V mA uA V A P2SMSJ5.0A 5.0 6.40 7.07 10 200 9.2 21.7 HE P2SMSJ6.0A 6.0 6.67 7.37 10 200 10.3 19.4 HG P2SMSJ6.5A 6.5 7.22 7.98 10 250 11.2 17.9 HK P2SMSJ7.0A 7.0 7.78 8.60 10 100 12.0 16.7 HM P2SMSJ7.5A 7.5 8.33 9.21 1.0 50 12.9 15.5 HP P2SMSJ8.0A 8.0 8.89 9.83 1.0 25 13.6 14.7 HR P2SMSJ8.5A 8.5 9.44 10.40 1.0 10 14.4 13.9 HT P2SMSJ9.0A 9.0 10.00 11.10 1.0 5 15.4 13.0 HV P2SMSJ10A 10.0 11.10 12.30 1.0 2.5 17.0 11.8 HX P2SMSJ11A 11.0 12.20 13.50 1.0 2.5 18.2 11.0 HZ P2SMSJ12A 12.0 13.30 14.70 1.0 2.5 19.9 10.1 IE P2SMSJ13A 13.0 14.40 15.90 1.0 1 21.5 9.3 IG P2SMSJ14A 14.0 15.60 17.20 1.0 1 23.2 8.6 IK P2SMSJ15A 15.0 16.70 18.50 1.0 1 24.4 8.2 IM P2SMSJ16A 16.0 17.80 19.70 1.0 1 26.0 7.7 IP P2SMSJ17A P2SMSJ18A 17.0 18.90 20.90 1.0 1 27.6 7.2 IR 18.0 20.00 22.10 1.0 1 29.2 6.8 IT P2SMSJ20A 20.0 22.20 24.50 1.0 1 32.4 6.2 IV P2SMSJ22A 22.0 24.40 26.90 1.0 1 35.5 5.6 IX P2SMSJ24A 24.0 26.70 29.50 1.0 1 38.9 5.1 IZ P2SMSJ26A 26.0 28.90 31.90 1.0 1 42.1 4.8 JE P2SMSJ28A 28.0 31.10 34.40 1.0 1 45.4 4.4 JG P2SMSJ30A 30.0 33.30 36.80 1.0 1 48.4 4.1 JK P2SMSJ33A 33.0 36.70 40.60 1.0 1 53.3 3.8 JM P2SMSJ36A 36.0 40.00 44.20 1.0 1 58.1 3.4 JP P2SMSJ40A 40.0 44.40 49.10 1.0 1 64.5 3.1 JR P2SMSJ43A 43.0 47.80 52.80 1.0 1 69.4 2.9 JT P2SMSJ45A 45.0 50.00 55.30 1.0 1 72.7 2.8 JV P2SMSJ48A 48.0 53.30 58.90 1.0 1 77.4 2.6 JX P2SMSJ51A 51.0 56.70 62.70 1.0 1 82.4 2.4 JZ P2SMSJ54A 54.0 60.00 66.30 1.0 1 87.1 2.3 RE P2SMSJ58A 58.0 64.40 71.20 1.0 1 93.6 2.1 RG P2SMSJ60A 60.0 66.70 73.70 1.0 1 96.8 1.8 RK P2SMSJ64A 64.0 71.10 78.60 1.0 1 103.0 1.7 RM P2SMSJ70A 70.0 77.80 86.00 1.0 1 113.0 1.5 RP P2SMSJ75A 75.0 83.30 92.10 1.0 1 121.0 1.4 RR P2SMSJ78A 78.0 86.70 95.80 1.0 1 126.0 1.4 RT P2SMSJ85A 85.0 94.40 104.00 1.0 1 137.0 1.3 RV P2SMSJ90A 90.0 100.00 111.00 1.0 1 146.0 1.2 RX P2SMSJ100A 100.0 111.00 123.00 1.0 1 162.0 1.1 RZ P2SMSJ110A 110.0 122.00 135.00 1.0 1 177.0 1.0 SE P2SMSJ120A 120.0 133.00 147.00 1.0 1 193.0 0.9 SG P2SMSJ130A 130.0 144.00 159.00 1.0 1 209.0 0.8 SK P2SMSJ150A 150.0 167.00 185.00 1.0 1 243.0 0.7 SM P2SMSJ160A 160.0 178.00 197.00 1.0 1 259.0 0.7 SP P2SMSJ170A 170.0 189.00 209.00 1.0 1 275.0 0.6 SR http://www.yeashin.com 2 REV.02 20120305 DEVICE CHARACTERISTICS P PPM ,PEAK PULSE FORWARD,KW P2SMSJ Series 100 PEAK PULSE FORWARD (P PP) OR CURRENT (I PP) DERATING IN PERCENTAGE % 100 Non-Repetitve P u l s e Wa v e f o m Shown in Figure.3 T A = 2 5 OC 10 1.0 0.1 0.1 1000 100 10 1.0 10000 75 50 25 0 0 25 td,PULSE WIDTH, micro sec 75 100 125 150 175 200 O T A ,AMBIENT TEMPERATURE, C Fig.1 PEAK PULSE POWER RATING CURVE Fig.2 DERATING CURVE 10,000 150 O tf = 10usec Peak Value Ippm 100 T J = 25 C f= 1.0MHZ Vsig = 50mVp -p O T A = 25 C Pulse Width (td) is Defined as the Point where the Peak Current Decayst to 50% of Ipp Ha lf Va lue -Ip p 2 C J ,CAPACITANCE,p F I PPM ,PEAK PULSE CURRENT,% 50 10/1000u se c Wa ve fo rm a s De fine d b ye R.E.A. 50 e -kt 0 td 0 1.0 2.0 3.0 4.0 1,000 Me a sure d a t Ze ro Bia s 100 Me a sure d a t Sta nd -Off Vo lta ge (VRWM) T,TIME,ms I FSM ,PEAK FORWARD SURGE CURRENT, AMPERES Fig.3 PULSE WAVEFORM 50 10 TJ= TJm a x 8.3m s Sing le Ha lf SinepWave JEDEC M e tho d 40 1.0 2.0 5.0 10 20 50 100 200 V( RWM), REVERSE STAND-OFF VOLTAGE, VOLTS 30 Fig.4 TYPICAL JUNCTION CAPACITANCE 20 10 0 1 2 4 10 20 40 100 NUMBER OF CYCLES AT 60Hz Fig.5 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT MOUNTING PAD LAYOUT http://www.yeashin.com S 3 REV.02 20120305