V240ME04 PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Base stations • Microwave Radios • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 200 Phase Noise @ 10 kHz offset (1 Hz BW) Harmonic Suppression (2nd) Tuning Voltage Typ Max Units 300 MHz -110 dBc/Hz -9 dBc 1.5 13.5 MHz/V 12 Tuning Sensitivity (avg.) 12 dBm 200 pF Pushing 1 MHz/V Pulling (14 dB Return Loss, Any Phase) 1 MHz 70 °C Max Units Power Output 5 Load Impedance 8.5 Vdc 50 Input Capacitance Operating Temperature Range -10 Package Style Power Supply Requirements MINI-16 Min Typ Supply Voltage (Vcc, nom.) 15 Supply Current (Icc) 20 Vdc 28 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V240ME04 Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. 340 FREQUENCY (MHz) 315 290 265 240 70 °C 25 °C 215 -10 °C 190 165 140 0 1 2 3 4 5 6 7 8 9 10 11 12 13 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 16 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 14 12 10 8 6 0.030 MIN. CUTBACK FROM LIVE PADS 4 2 0 153 170 186 201 214 226 238 250 261 272 282 293 302 312 FREQUENCY (MHz) 70 °C 25 °C -10 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-16 0.220 MINI-16-LOW 0.160 MINI-16-L 0.130 MINI-16-UL 0.100 MINI-16-EL 0.085 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B